RESUMEN
Chemical vapor deposition synthesis of graphene on polycrystalline copper substrates from methane is a promising technique for industrial production and application. However, the quality of grown graphene can be improved by using single-crystal copper (111). In this paper, we propose to synthesize graphene on epitaxial single-crystal Cu film deposited and recrystallized on a basal-plane sapphire substrate. The effect of film thickness, temperature, and time of annealing on the size of copper grains and their orientation is demonstrated. Under optimized conditions, the copper grains with the (111) orientation and a record size of several millimeters are obtained, and the single-crystal graphene is grown over their entire area. The high quality of synthesized graphene has been confirmed by Raman spectroscopy, scanning electron microscopy, and the sheet resistance measurements by the four point probe method.
RESUMEN
In the present study, a powder of Ti-18Zr-15Nb biomedical alloy with spongy morphology and with more than 95% vol. of ß-Ti was obtained by reducing the constituent oxides with calcium hydride. The influence of the synthesis temperature, the exposure time, and the density of the charge (TiO2 + ZrO2 + Nb2O5 + CaH2) on the mechanism and kinetics of the calcium hydride synthesis of the Ti-18Zr-15Nb ß-alloy was studied. Temperature and exposure time were established as crucial parameters with the help of regression analysis. Moreover, the correlation between the homogeneity of the powder obtained and the lattice microstrain of ß-Ti is shown. As a result, temperatures above 1200 °C and an exposure time longer than 12 h are required to obtain a Ti-18Zr-15Nb powder with a single ß-phase structure and uniformly distributed elements. The analysis of ß-phase growth kinetics revealed that the formation of ß-Ti occurs due to the solid-state diffusion interaction between Ti, Nb, and Zr under the calcium hydride reduction of TiO2 + ZrO2 + Nb2O5, and the spongy morphology of reduced α-Ti is inherited by the ß-phase. Thus, the results obtained provide a promising approach for manufacturing biocompatible porous implants from ß-Ti alloys that are believed to be attractive candidates for biomedical applications. Moreover, the current study develops and deepens the theory and practical aspects of the metallothermic synthesis of metallic materials and can be compelling to specialists in powder metallurgy.
RESUMEN
In this work, the microstructure, phase state, texture, superelastic and mechanical properties of a Ti-18Zr-15Nb (at. %) shape memory alloy subjected to a combined thermomechanical treatment, including hot rotary forging with either air cooling or water quenching and post-deformation annealing are studied. It was revealed that the main structural component of the deformed and annealed alloy is BCC ß-phase. With an increase in the forging temperature from 600 to 700 °C, the average grain size increases from 5.4 to 17.8 µm for the air-cooled specimens and from 3.4 to 14.7 µm for the water-quenched specimens. Annealing at 525 °C after forging at 700 °C with water quenching leads to the formation of a mixed statically and dynamically polygonized substructure of ß-phase. In this state, the alloy demonstrates the best combination of functional properties in this study: a Young's modulus of ~33 GPa, an ultimate tensile strength of ~600 MPa and a superelastic recovery strain of ~3.4%.