RESUMEN
For operation as power amplifiers in RF applications, high electron mobility transistor (HEMT) structures are subjected to a range of bias conditions, applied at both the gate and drain terminals, as the device is biased from the OFF- to ON-state conditions. The stability of the device threshold voltage (Vt) condition is imperative from a circuit-design perspective and is the focus of this study, where stresses in both the ON and OFF states are explored. We see rapid positive threshold voltage increases under negative bias stress and subsequent recovery (i.e., Vt reduces), whereas conversely, we see a negative Vt shift under positive stress and Vt increase during the subsequent relaxation phase. These effects are correlated with the thickness of the GaN layer and ultimately result from the deep carbon-acceptor levels in the C-GaN back barrier incorporated to screen the buffer between the silicon substrate and the epitaxially grown GaN layer. Methods to mitigate this effect are explored, and the consequences are discussed.
RESUMEN
Amorphous indium gallium zinc oxide (a-IGZO) is becoming an increasingly important technological material. Transport in this material is conceptualized as the heavy disorder of the material causing a conduction or mobility band-edge that randomly varies and undulates in space across the entire system. Thus, transport is envisioned as being dominated by percolation physics as carriers traverse this varying band-edge landscape of "hills" and "valleys". It is then something of a missed opportunity to model such a system using only a compact approach-despite this being the primary focus of the existing literature-as such a system can easily be faithfully reproduced as a true microscopic TCAD model with a real physically varying potential. Thus, in this work, we develop such a "microscopic" TCAD model of a-IGZO and detail a number of key aspects of its implementation. We then demonstrate that it can accurately reproduce experimental results and consider the issue of the addition of non-conducting band-tail states in a numerically efficient manner. Finally, two short studies of 3D effects are undertaken to illustrate the utility of the model: specifically, the cases of variation effects as a function of device size and as a function of surface roughness scattering.
RESUMEN
We develop a compact physics model for hot-carrier degradation (HCD) that is valid over a wide range of gate and drain voltages (Vgs and Vds, respectively). Special attention is paid to the contribution of secondary carriers (generated by impact ionization) to HCD, which was shown to be significant under stress conditions with low Vgs and relatively high Vds. Implementation of this contribution is based on refined modeling of carrier transport for both primary and secondary carriers. To validate the model, we employ foundry-quality n-channel transistors and a broad range of stress voltages {Vgs,Vds}.
RESUMEN
We study how nitridation, applied to SiON gate layers, impacts the reliability of planar metal-oxide-semiconductor field effect transistors (MOSFETs) subjected to negative and positive bias temperature instability (N/PBTI) as well as hard breakdown (HBD) characteristics of these devices. Experimental data demonstrate that p-channel transistors with SiON layers characterized by a higher nitrogen concentration have poorer NBTI reliability compared to their counterparts with a lower nitrogen content, while PBTI in n-channel devices is negligibly weak in all samples independently of the nitrogen concentration. The Weibull distribution of HBD fields extracted from experimental data in devices with a higher N density are shifted towards lower values with respect to that measured in MOSFETs, and SiON films have a lower nitrogen concentration. Based on these findings, we conclude that a higher nitrogen concentration results in the aggravation of BTI robustness and HBD characteristics.