RESUMEN
There is a current healthcare need for improved prosthetic socket fit provision for the masses using low-cost and simple to manufacture sensors that can measure pressure, shear, and friction. There is also a need to address society's increasing concerns regarding the environmental impact of electronics and IoT devices. Prototype thin, low-cost, and low-weight pressure, shear, and loss of friction sensors have been developed and assembled for trans-femoral amputees. These flexible and conformable sensors are simple to manufacture and utilize more enviro-friendly novel magnetite-based QTSS™ (Quantum Technology Supersensor™) quantum materials. They have undergone some initial tests on flat and curved surfaces in a pilot amputee trial, which are presented in this paper. These initial findings indicate that the prototype pressure sensor strip is capable of measuring pressure both on flat and curved socket surfaces in a pilot amputee trial. They have also demonstrated that the prototype shear sensor can indicate increasing shear forces, the resultant direction of the shear forces, and loss of friction/slippage events. Further testing, amputee trials, and ongoing optimization is continuing as part of the SocketSense project to assist prosthetic comfort and fit.