RESUMEN
In recent years, anaerobic digestion has been recognized as a suitable alternative for tequila vinasses treatment due to its high energy recovery and chemical oxygen demand (COD) removal efficiency. However, key factors such as the lack of suitable monitoring schemes and the presence of load disturbances, which may induce unstable operating conditions in continuous systems, have limited its application at full scale. Therefore, the aim of this work was to evaluate the anaerobic sequencing batch reactor (AnSBR) configuration in order to provide a low cost and easy operation alternative for the treatment of these complex effluents. In particular, the AnSBR was evaluated under different pH-temperature combinations: 7 and 32 °C; 7 and 38 °C; 8 and 32 °C and 8 and 38 °C. Results showed that the AnSBR configuration was able to achieve high COD removal efficiencies (around 85%) for all the tested conditions, while the highest methane yield was obtained at pH 7 and 38 °C (0.29 L/g COD added). Furthermore, high robustness was found in all the AnSBR experiments. Therefore, the full-scale application of the AnSBR technology for the treatment of tequila vinasses is quite encouraging, in particular for small and medium size tequila industries that operate under seasonal conditions.
Asunto(s)
Biocombustibles/análisis , Residuos Industriales/análisis , Eliminación de Residuos Líquidos , Bebidas Alcohólicas/análisis , Anaerobiosis , Reactores Biológicos , Concentración de Iones de Hidrógeno , Eliminación de Residuos , TemperaturaRESUMEN
In sulfate-reducing reactors, it has been reported that the sulfate removal efficiency increases when the COD/SO4(2-) ratio is increased. The start-up of a down-flow fluidized bed reactor constitutes an important step to establish a microbial community in the biofilm able to survive under the operational bioreactor conditions in order to achieve effective removal of both sulfate and organic matter. In this work the influence of COD/SO4(2-) ratio and HRT in the development of a biofilm during reactor start-up (35 days) was studied. The reactor was inoculated with 1.6 g VSS/L of granular sludge, ground low density polyethylene was used as support material; the feed consisted of mineral medium at pH 5.5 containing 1 g COD/L (acetate:lactate, 70:30) and sodium sulfate. Four experiments were conducted at HRT of 1 or 2 days and COD/SO4(2-) ratio of 0.67 or 2.5. The results obtained indicated that a COD/SO4(2-) ratio of 2.5 and HRT 2 days allowed high sulfate and COD removal (66.1 and 69.8%, respectively), whereas maximum amount of attached biomass (1.9 g SVI/L support) and highest sulfate reducing biofilm activity (10.1 g COD-H2S/g VSS-d) was achieved at HRT of 1 day and at COD/sulfate ratios of 0.67 and 2.5, respectively, which suggests that suspended biomass also played a key role in the performance of the reactors.