RESUMEN

In a previous work, we explored zone broadening and the achievable plate numbers in linear drift tube ion mobility-mass spectrometry through developing a plate-height model [1]. On the basis of these findings, the present theoretical study extends the model by exploring peak-to-peak resolution and peak capacity in ion mobility separations. The first part provides a critical overview of chromatography-influenced resolution equations, including refinement of existing formulae. Furthermore, we present exact resolution equations for drift tube ion mobility spectrometry based on first principles. Upon implementing simple modifications, these exact formulae could be readily extended to traveling wave ion mobility separations and to cases when ion mobility spectrometry is coupled to mass spectrometry. The second part focuses on peak capacity. The well-known assumptions of constant plate number and constant peak width form the basis of existing approximate solutions. To overcome their limitations, an exact peak capacity equation is derived for drift tube ion mobility spectrometry. This exact solution is rooted in a suitable physical model of peak broadening, accounting for the finite injection pulse and subsequent diffusional spreading. By borrowing concepts from the theoretical toolbox of chromatography, we believe that the present study will help in integrating ion mobility spectrometry into the unified language of separation science.

RESUMEN

Uniform field drift tube ion mobility-mass spectrometry (DTIM-MS) has emerged as a valuable tool for a range of analytical applications. In focus here are standardized collisional cross section values from DTIM-MS (DTCCS) as a candidate identification point for various analytical workflows. Of critical importance in establishing this parameter as a valid identification point is a rugged estimation of uncertainties according to the procedures used for their derivation. Relying on the assumption of the zero-field limit, the primary method of measurement for DTCCS values involves experimental determination of arrival times of an ion measured at several different field strengths transiting a drift tube filled with high purity drift gas, while a method using measurements of external calibrants at a single field strength is employed to allow for online measurements of transient signals (e.g., chromatographic peaks). Both approaches are here considered with respect to the uncertainty of input experimental variables (temperature, pressure, voltages, physical constants) and the steps of the calibration function employed. Estimations of uncertainty were performed according to EURACHEM with Monte Carlo simulations and reveal that existing consensus calibration standards from experimental stepped-field IM-MS determinations have estimated expanded uncertainties in the range of 2.7 to 4.6% (k = 2). Application of these standards for calibration considering these input uncertainties reveals uncertainty estimates of 4.7-9.1% (k = 2) for measured values using an established single-field calibration approach. Finally, directions for improving this situation via new experimental efforts toward standard reference and calibration materials are presented.

RESUMEN

In the past decade, ion mobility spectrometry (IMS) in combination with mass spectrometry (IM-MS) became a widely employed technique for the separation and structural characterization of ionic species in the gas phase. Similarly to chromatography, where studies on the mechanism of band broadening and adequate plate-height equations have been aiding method development and promoting advancements in column technology, a suitable resolving power theory of drift tube ion mobility-mass spectrometry (DTIM-MS) is essential to stimulate further progress in this emerging field of separation science. In the present study, therefore, we explore dispersion processes in detail and present a plate-height model of ion mobility-mass spectrometry. We quantify the effects of five major dispersion processes that contribute to zone broadening and determine the resolving power in DTIM-MS: diffusion, Coulomb repulsion, electric field inhomogeneities, the finite initial spread of the ion cloud and dispersion outside the mobility cell. A solution is provided to account for the nonuniform separation field in IM-MS in the presence of multiple compartments. The equations - derived from first principles - serve as the basis for formulating an expression that is similar in nature to van Deemter's plate-height equation for chromatography. A comprehensive set of experiments was performed on a custom-built DTIM-MS instrument to evaluate the accuracy of the plate-height model, resulting in satisfactory agreement between experiment and theory. Building on these findings, the plate-height equation was employed to explore the influence of drift gas pressure, injection pulse-width and the mobility of ions on resolving power from a theoretical point of view. Our findings may aid instrument design and development in the future, as well as the optimization of measurement conditions to improve ion mobility separations. By employing the plate-height concept and the general formalism of differential migration processes to describe zone spreading in IM-MS, we aim to find a common ground between this emerging method and such well-established techniques as HPLC or CZE. We also hope that the work presented here will facilitate a broader acceptance of IMS as a separation method of great potential by the communities of chromatography and electrophoresis, as well as that of mass spectrometry.

RESUMEN

This chapter describes the developments in drift-tube ion mobility-mass spectrometry (DTIM-MS) that have driven application development in 'omics analyses. Harnessing the additional, orthogonal separation that DTIM provides increased confidence in compound identifications as the mass spectral complexity can be reduced and mobility-derived parameters (most prominently the collision cross section, CCS) used to support identity confirmation goals for a variety of 'omics application areas. Presented within this contribution is a methodology for improving the transmission and maintaining accurate determination of drift time-derived CCS (DTCCS) for low molecular weight compounds for a typical nontargeted 'omics (metabolomics) workflow using liquid chromatography in combination with DTIM-MS.

Asunto(s)

RESUMEN

This study of ion accumulation/release behavior relevant to ion mobility-mass spectrometry (IM-MS) as employed for non-targeted metabolomics involves insight from theoretical studies, and controlled reference experiments involving measurement of low and high molecular mass metabolites in varying concentrations within a complex matrix (yeast extracts). Instrumental settings influencing ion trapping (accumulation time) and release conditions in standard and multiplexed operation have been examined, and translation of these insights to liquid chromatography (LC) in combination with drift tube IM-MS measurements has been made. The focus of the application is non-targeted metabolomics using carefully selected samples to allow quantitative interpretations to be made. Experimental investigation of the IM-MS ion utilization efficiency particularly focusing on the use of the Hadamard transform multiplexing with 4-bit pseudo-random pulsing sequence for assessment of low and high molecular mass metabolites is compared with theoretical modeling of gas-phase behavior of small and large molecules in the IM trapping funnel. Increasing the trapping time for small metabolites with standard IM-MS operation is demonstrated to have a deleterious effect on maintaining a quantitative representation of the metabolite abundance. The application of these insights to real-world non-targeted metabolomics assessment of intracellular extracts from biotechnologically relevant production processes is presented, and the results were compared to LC×IM-MS measurements of the same samples. Spiking of a uniformly 13C-labeled yeast extract (as a standard matrix) with varying amounts of natural metabolites is used to assess the linearity and sensitivity according to the instrument mode of operation (i.e., LC-MS, LC×IM-MS, and LC×[multiplexed]IM-MS). When comparing metabolite quantification using standard and multiplexed operation, sensitivity gain factors of 2-8 were obtained for metabolites with m/z below 250. Taken together, the simulation and experimental results of this study provide insight for optimizing measurement conditions for metabolomics and highlight the need for implementation of multiplexing strategies using short trapping times as relative quantification (e.g., in the context with non-targeted differential analysis) with sufficient sensitivity and working range is a requirement in this field of application.

Asunto(s)

RESUMEN

RATIONALE: The wide chemical diversity and complex matrices inherent to metabolomics still pose a challenge to current analytical approaches for metabolite screening. Although dedicated front-end separation techniques combined with high-resolution mass spectrometry set the benchmark from an analytical point of view, the increasing number of samples and sample complexity demand for a compromise in terms of selectivity, sensitivity and high-throughput analyses. METHODS: Prior to low-field drift tube ion mobility (IM) separation and quadrupole time-of-flight mass spectrometry (QTOFMS) detection, rapid ultrahigh-performance liquid chromatography separation was used for analysis of different concentration levels of dansylated metabolites present in a yeast cell extract. For identity confirmation of metabolites at the MS2 level, an alternating frame approach was chosen and two different strategies were tested: a data-independent all-ions acquisition and a quadrupole broad band isolation (Q-BBI) directed by IM drift separation. RESULTS: For Q-BBI analysis, the broad mass range isolation was successfully optimized in accordance with the distinctive drift time to m/z correlation of the dansyl derivatives. To guarantee comprehensive sampling, a broad mass isolation window of 70 Da was employed. Fragmentation was performed via collision-induced dissociation, applying a collision energy ramp optimized for the dansyl derivatives. Both approaches were studied in terms of linear dynamic range and repeatability employing ethanolic extracts of Pichia pastoris spiked with 1 µM metabolite mixture. Example data obtained for histidine and glycine showed that drift time precision (<0.01 to 0.3% RSD, n = 5) compared very well with the data reported in an earlier IM-TOFMS-based study. CONCLUSIONS: Chimeric mass spectra, inherent to data-independent analysis approaches, are reduced when using a drift time directed Q-BBI approach. Additionally, an improved linear dynamic working range was observed, representing, together with a rapid front-end separation, a powerful approach for metabolite screening.

Asunto(s)

RESUMEN

The characterization of wine via MS-based metabolic fingerprinting techniques remains a challenging undertaking due to the large number of phenolic compounds that cannot be confidently annotated and identified within analytical workflows. The combination of high performance liquid chromatography with low-field drift tube ion mobility time-of-flight mass spectrometry (HPLC × IMS-TOFMS) offers potential for the confident characterization and fingerprinting of wine using a metabolomics-type workflow. In particular, the use of collision cross section values from low-field drift tube IMS using nitrogen as drift gas (DTCCSN2) in addition to retention time and a high resolution mass spectrum for putative compounds allows rugged statistical assessment and identity confirmation using CCS libraries (<0.5% error) to be performed. In the present work, an HPLC × IMS-TOFMS platform has been utilized for the fingerprinting of 42 traditionally produced red wines emanating from the Republic of Macedonia. After establishing the reliability of DTCCSN2 as an identification point for wine metabolomics in both ionization modes, fingerprinting of wines according to grape variety was undertaken and a full dataset containing retention, accurate mass and DTCCSN2 values used to derive lists of compounds found to be statistically characteristic for each variety. Putative compounds were further assessed by assignment of in-source and post-drift mass fragments aligned according to retention time, drift time, and accurate mass providing up to seven identification points for a single compound when data from both positive and negative mode measurements are combined.

Asunto(s)

RESUMEN

Non-targeted analysis of metabolites in hypothesis-generating workflows has proven its potential to answer essential questions that arise when dealing with complex biological systems. Nevertheless, tracking changes in perturbed systems via accurate quantification and the identification process itself represent the most critical challenges in these workflows. Recent advances in ion mobility-mass spectrometry have enabled this technique to increase the confidence of metabolite annotation by introducing a complementary conditional molecular descriptor, that is collision cross section.

Asunto(s)

RESUMEN

Collision cross section (CCS) measurements resulting from ion mobility-mass spectrometry (IM-MS) experiments provide a promising orthogonal dimension of structural information in MS-based analytical separations. As with any molecular identifier, interlaboratory standardization must precede broad range integration into analytical workflows. In this study, we present a reference drift tube ion mobility mass spectrometer (DTIM-MS) where improvements on the measurement accuracy of experimental parameters influencing IM separations provide standardized drift tube, nitrogen CCS values (DTCCSN2) for over 120 unique ion species with the lowest measurement uncertainty to date. The reproducibility of these DTCCSN2 values are evaluated across three additional laboratories on a commercially available DTIM-MS instrument. The traditional stepped field CCS method performs with a relative standard deviation (RSD) of 0.29% for all ion species across the three additional laboratories. The calibrated single field CCS method, which is compatible with a wide range of chromatographic inlet systems, performs with an average, absolute bias of 0.54% to the standardized stepped field DTCCSN2 values on the reference system. The low RSD and biases observed in this interlaboratory study illustrate the potential of DTIM-MS for providing a molecular identifier for a broad range of discovery based analyses.

Asunto(s)

RESUMEN

Reversed-phase LC combined with high-resolution mass spectrometry (HRMS) is one of the most popular methods for cellular metabolomics studies. Due to the difficulties in analyzing a wide range of polarities encountered in the metabolome, 100%-wettable reversed-phase materials are frequently used to maximize metabolome coverage within a single analysis. Packed with silica-based sub-3 µm diameter particles, these columns allow high separation efficiency and offer a reasonable compromise for metabolome coverage within a single analysis. While direct performance comparison can be made using classical chromatographic characterization approaches, a comprehensive assessment of the column's performance for cellular metabolomics requires use of a full LC-HRMS workflow in order to reflect realistic study conditions used for cellular metabolomics. In this study, a comparison of several reversed-phase LC columns for metabolome analysis using such a dedicated workflow is presented. All columns were tested under the same analytical conditions on an LC-TOF-MS platform using a variety of authentic metabolite standards and biotechnologically relevant yeast cell extracts. Data on total workflow performance including retention behavior, peak capacity, coverage, and molecular feature extraction repeatability from these columns are presented with consideration for both nontargeted screening and differential metabolomics workflows using authentic standards and Pichia pastoris cell extract samples.

Asunto(s)

RESUMEN

Measuring the exposome remains a challenge due to the range and number of anthropogenic molecules that are encountered in our daily lives, as well as the complex systemic responses to these exposures. One option for improving the coverage, dynamic range and throughput of measurements is to incorporate ion mobility spectrometry (IMS) into current MS-based analytical methods. The implementation of IMS in exposomics studies will lead to more frequent observations of previously undetected chemicals and metabolites. LC-IMS-MS will provide increased overall measurement dynamic range, resulting in detections of lower abundance molecules. Alternatively, the throughput of IMS-MS alone will provide the opportunity to analyze many thousands of longitudinal samples over lifetimes of exposure, capturing evidence of transitory accumulations of chemicals or metabolites. The volume of data corresponding to these new chemical observations will almost certainly outpace the generation of reference data to enable their confident identification. In this perspective, we briefly review the state-of-the-art in measuring the exposome, and discuss the potential use for IMS-MS and the physico-chemical property of collisional cross section in both exposure assessment and molecular identification.

Asunto(s)

RESUMEN

Fermentation and cell culture biotechnology in the form of so-called "cell factories" now play an increasingly significant role in production of both large (e.g. proteins, biopharmaceuticals) and small organic molecules for a wide variety of applications. However, associated metabolic engineering optimisation processes relying on genetic modification of organisms used in cell factories, or alteration of production conditions remain a challenging undertaking for improving the final yield and quality of cell factory products. In addition to genomic, transcriptomic and proteomic workflows, analytical metabolomics continues to play a critical role in studying detailed aspects of critical pathways (e.g. via targeted quantification of metabolites), identification of biosynthetic intermediates, and also for phenotype differentiation and the elucidation of previously unknown pathways (e.g. via non-targeted strategies). However, the diversity of primary and secondary metabolites and the broad concentration ranges encompassed during typical biotechnological processes means that simultaneous extraction and robust analytical determination of all parts of interest of the metabolome is effectively impossible. As the integration of metabolome data with transcriptome and proteome data is an essential goal of both targeted and non-targeted methods addressing production optimisation goals, additional sample preparation steps beyond necessary sampling, quenching and extraction protocols including clean-up, analyte enrichment, and derivatisation are important considerations for some classes of metabolites, especially those present in low concentrations or exhibiting poor stability. This contribution critically assesses the potential of current sample preparation strategies applied in metabolomic studies of industrially-relevant cell factory organisms using mass spectrometry-based platforms primarily coupled to liquid-phase sample introduction (i.e. flow injection, liquid chromatography, or capillary electrophoresis). Particular focus is placed on the selectivity and degree of enrichment attainable, as well as demands of speed, absolute quantification, robustness and, ultimately, consideration of fully-integrated bioanalytical solutions to optimise sample handling and throughput.

Asunto(s)

RESUMEN

In the domain of liquid phase separations, the quality of separation obtainable is most readily gauged by consideration of classical chromatographic peak capacity theory. Column-based multidimensional strategies for liquid chromatography remain the most attractive and practical route for increasing the number of spatially resolved components in order to reduce stress on necessary mass spectrometric detection. However, the stress placed on a chromatographic separation step as a second dimension in a comprehensive online methodology (i.e. online LC×LC) is rather high. As an alternative to online LC×LC combinations, coupling of HPLC with ion mobility spectrometry hyphenated to mass spectrometry (IMS-MS) has emerged as an attractive approach to permit comprehensive sampling of first dimension chromatographic peaks and subsequent introduction to an orthogonal IMS separation prior to measurement of ions by a mass spectrometer. In the present work, utilization of classical peak capacity and ion mobility theory allows theoretical assessment of the potential of two- (LC×IMS-MS) or even three-dimensional (LC×LC×IMS-MS) experimental setups to enhance peak capacity and, therefore, the number of correctly annotated features within the framework of complex, non-targeted analysis problems frequently addressed using HPLC-MS strategies. Theoretical calculations indicate that newly-available drift tube IMS-MS instrumentation can yield peak capacities of between 10 and 40 using nitrogen drift gas for typical non-targeted metabolomic, lipidomic and proteomic applications according to the expected reduced mobilities of components in the respective samples. Theoretically, this approach can significantly improve the overall peak capacity of conventional HPLC-(MS) methodologies to in excess of 10(4) depending upon the column length and gradient time employed. A more elaborate combination of LC×LC×IMS-MS would improve the ion suppression limitation and possibly allow access to theoretically even higher peak capacities, but such a combination may render the IMS separation practically redundant as well as imparting the well-known dilution problems associated with LC×LC. Finally, some predictions for the separation of co-eluted isobaric compounds can also be made by considering the required peak-to-peak resolution for acceptable IMS separation. The here-described theoretical predication approach can be used to aid method development for HPLC×IMS-MS and is also accompanied by some practical considerations that should be contemplated in associated non-targeted analysis workflows.

Asunto(s)

RESUMEN

The combination of CE and MS is now a widely used tool that can provide a combination of high resolution separations with detailed structural information. Recently, we highlighted the benefits of an approach to add further functionality to this well-established hyphenated technique, namely the possibility to perform chemical reactions within the sheath-liquid of the CE-MS interface . Apart from using hydrogen/deuterium exchange for online determination of numbers of exchangeable protons, the addition of DPPH• (2,2-diphenyl-1-picrylhydrazyl) to the sheath-liquid can be used as a fast screening tool for studying antioxidant characteristics of individual components. Such a CE-MS methodology allows rapid and information-rich analysis with minimal reagent and sample consumption to be performed. In the present work, we demonstrate the applicability of this approach for the characterization of phenolic plant extracts from the Labiatae family, namely Rosmarinus officinalis and Melissa officinalis. Using the described approach, a wide range of compounds (15 and 13 phenolic compounds, respectively) could be confidently identified using a combination of high resolution CE-MS separations with implementation of online deuterium exchange and DPPH• reactions. These compounds included polyphenols, phenolic acids, and triterpene acids. In conjunction with online MS/MS experiments, extensive structural information for aglyconic and glycosylated antioxidants present in the extracts could be obtained using simple experimental changes, which can be carried out prior to the purchasing of expensive chemical standards or the time-consuming preparative isolation of individual compounds.

Asunto(s)

RESUMEN

Chromatographic analytical columns containing porous monolithic beds based on cross-linked polymers and derivatized silica have now been commercially available for several years and, despite some apparent conceptual similarities, are marketed and utilized for quite different chromatographic applications. While this distinction is well-accepted by users, the fundamental differences in chromatographic behavior of these materials that lead to this clear distinction in their primary application areas have not yet been systematically studied. To this end, the present experimental study investigates differences in the apparent chromatographic characteristics when using small molecules with commercially available monolithic reversed-phase analytical columns based on poly(styrene-co-divinyl benzene) and C18-derivatized silica. Relevant practical information is obtained from measurements made by "arrested elution" of non-retained and retained solutes and chromatographic elution performance across a wide range of retention factors with a set of structurally similar small molecules. Observations of apparent diffusion probed with "arrested elution" experiments and mass transport inferred from the observed efficiency at increased flow velocity in the monolithic structures (both under retained and non-retained conditions) lead to the conclusion that fundamentally different solute transport behavior is operative. The silica-based monolithic materials are used to establish a "reference" for comparison to observations with cross-linked porous polymeric monolithic materials. Despite the differences in morphology, chromatographic properties have their origin in the underlying physical structure of pore space. The derivatized surfaces in silica-based materials have their counterpart in pore-fluid gel interfaces in polymeric monoliths. The pore-fluid gel interfaces have their origin in varying solvation of polymer by eluent components. Consequently, they allow varying permeation of small molecules into the solvated polymer via partition. The traversing of small molecules through the polymer monolith's complex nanoscale physical structure plays a key factor when rationalizing any chromatographic performance as seen in the slopes of plate height curves which vary dramatically with mobile phase composition and solute identity.

Asunto(s)

RESUMEN

Conventional coupling of capillary electrophoresis with electrospray ionisation mass spectrometry typically relies on the use of a triaxial sheath-flow liquid interface to facilitate electrical contact and provide a stable electrospray. In this type of analysis, the use of additives in the sheath liquid itself can also be used to improve ionisation of analytes and even facilitate reactions between separation and detection steps (which we broadly term "sheath-flow chemistry"). In the present work, this concept is demonstrated using two types of sheath-flow reactions for CE coupled with quadrupole time-of-flight (Q-TOF) MS detection. Sheath liquid compositions containing deuterated solvents or DPPH (2,2-diphenyl-1-dipicrylhydrazyl) stable free-radicals yield useful additional structural information for separated analytes. Investigations of fundamental physical and chemical characteristics of the sheath liquid coupling show their direct influence on the efficiency and some of the products of the respective reactions. For example, reducing the capillary internal diameter from 75 to 25µm increased the relative abundance of fully deuterated ions detected by 63-65% (5 exchangeable hydrogens) using constant sheath-flow conditions. Addition of 0.05-0.2mM DPPH to the sheath liquid reduced the peak total ion count obtained for typical antioxidant species by 20 to >95% allowing strongly antioxidant species from mixtures to be readily identified and further studied. The presented approach allows a rapid and information-rich analysis to be performed with minimal reagent and sample consumption.

Asunto(s)

RESUMEN

Concerning polymeric monolithic materials utilized in separation science, the structural and mechanical characteristics from the nanoscopic to the macroscopic scale remain of great interest. Suitable analytical tools are urgently required to understand the polymer monolith's constituent structure, particularly in the case of nanoscale polymer properties that tend to develop gel porosity in contact with a mobile phase ultimately affecting the chromatographic performance. Herein described are our first findings from a characterization of commercially available analytical polymer monoliths based on styrene/divinylbenzene and methacrylate chemistries utilizing confocal Raman spectroscopy imaging and atomic force microscopy (AFM). Confocal Raman spectroscopy can be used to generate a three-dimensional representation of monoliths in both dry state and in contact with solvent. AFM force-indentation measurements on individual cross-sectioned globular features permit detailed assessment of mechanical properties of the stationary phase. This approach allowed so far unprecedented insight and identification of a heterogeneous cross-link density distribution of polymer material within individual globular features on a submicrometer scale.

RESUMEN

Polyimides (PIs) are a group of widely used synthetic materials that service a variety of different purposes including microelectronics, insulating films and aerospace applications. Depending on the requirements (defined by the particular final product), the actual composition of PIs may show substantial chemical variation. To study this variation in chemical structure, CE-MS can be employed for the determination of PI composition following chemical degradation of the polymer sample. PI is chemically decomposed to corresponding aromatic diamine and carboxylic acid components using an alkali fusion reaction. Solid polymer samples are fused in a potassium hydroxide melt yielding reaction products that are diluted in acid and can be immediately analysed by CE coupled to a Q/TOF-MS with quantification performed using conventional UV detection. This approach involves a simple and rapid sample preparation yielding both qualitative and quantitative information regarding the chemical composition of the polymer. Application of the CE-MS approach is shown for a range of commercially available PI and poly(amide-imide) materials and the results are used to infer the respective chemical compositions.

Asunto(s)

RESUMEN

The influence of mobile phase solvent composition and consequently retention factor on the chromatographic performance for a set of small molecules was studied using a commercially available poly(styrene-co-divinyl benzene) analytical scale porous polymeric monolithic column as an example. Chromatographic elution performance was studied across retention factors from close to 0 up to 100 realized for a set of structurally similar small molecules in a binary reversed-phase solvent environment of acetonitrile and water. By altering the mobile phase composition from volume fractions of acetonitrile of just 10% (v/v) to only acetonitrile it was systematically shown that gel porosity of the monolithic column plays a dominant role in modulating mass transport and the associated chromatographic efficiency in a consistent manner. Up to a sixfold difference in plate height was recorded for the most strongly retained hydrophobic solute (ethylbenzene) at a constant, low flow velocity simply by varying the amount of acetonitrile in the mobile phase. Plate height curves recorded for the set of solutes that comprise benzene, toluene, ethylbenzene as well as phenol and benzyl alcohol further demonstrate the importance of functional group content of the solute and the modulated porous gel structure on mass transport. These results highlight some important practical considerations for characterizing the chromatographic properties of any polymeric monolithic column. First, it is imperative that any chromatographic performance characterization using plate height data explicitly considers the influence of mobile phase composition, retention factor, molecular size and functional groups of the probe solute. Second, as the physicochemical conditions of the material are directly reflected in the gel porosity, a range of different mobile phase compositions, retention factors and probe-specific effects must be investigated to yield a fair appraisal of the chromatographic performance.

Asunto(s)

RESUMEN

Within recent years there has been an increase in research focused on the design and application of organic polymer monoliths in all areas of separation science. This is largely driven by the theoretical and practical benefits that these materials should be able to provide, particularly in terms of improved biocompatibility and high permeability. This review summarises recent new developments in this field with a focus on new approaches to the design and synthesis of polymeric monolithic materials for analytical separation science. This includes the use of alternative synthetic methodologies such as the development of hyper-crosslinked monoliths, preparation of hybrid materials and incorporation of nanostructures in the polymeric scaffold. New and developing approaches for the structural characterisation of monolithic columns are also included. Finally, we critically discuss the current chromatographic performances achieved with this column technology as well as where future developments in this field may be directed.