RESUMEN

We present the simulation and design optimization of an integrated light-emitting-diode/photodetector (LED-PD) sensor system for monitoring of light absorbance changes developing in analyte-sensitive compounds. The sensor integrates monolithically both components in a single chip, offering advantages such as downsizing, reduced assembly complexity, and lower power consumption. The changes in the optical parameters of the analyte-sensitive ink are detected by monitoring the power transmission from the LED to the PD. Ray tracing and coupled modeling approach (CMA) simulations are employed to investigate the interaction of the emitted light with the ink. In highly absorbing media, CMA predicts more accurate results by considering evanescent waves. Simulations also suggest that an approximately 39% change in optical transmission can be achieved by adjusting the ink-deposited layer thickness and varying the extinction coefficient from 10-4 to 3×10-4.

RESUMEN

Color QR Codes are often generated to encode digital information, but one also could use colors or to allocate colors in a QR Code to act as a color calibration chart. In this dataset, we present several thousand QR Codes images generated with two different colorization algorithms (random and back-compatible) and several tuning variables in these color encoding. The QR Codes were also exposed to three different channel conditions (empty, augmentation and real-life). Also, we derive the SNR and BER computations for these QR Code in comparison with their black and white versions. Finally, we also show if ZBar, a commercial QR Code scanner, is able to read them.

RESUMEN

In this work, we present conductometric gas sensors based on p-type calcium iron oxide (CaFe2O4) nanoparticles. CaFe2O4 is a metal oxide (MOx) with a bandgap around 1.9 eV making it a suitable candidate for visible light-activated gas sensors. Our gas sensors were tested under a reducing gas (i.e., ethanol) by illuminating them with different light-emitting diode (LED) wavelengths (i.e., 465-640 nm). Regardless of their inferior response compared to the thermally activated counterparts, the developed sensors have shown their ability to detect ethanol down to 100 ppm in a reversible way and solely with the energy provided by an LED. The highest response was reached using a blue LED (465 nm) activation. Despite some responses found even in dark conditions, it was demonstrated that upon illumination the recovery after the ethanol exposure was improved, showing that the energy provided by the LEDs is sufficient to activate the desorption process between the ethanol and the CaFe2O4 surface.

RESUMEN

A film of gas sensitive ZnO nanoparticles has been coupled with a low-power micro light plate (µLP) to achieve a NO2-parts-per-billion conductometric gas sensor operating at room temperature. In this µLP configuration, an InGaN-based LED (emitting at 455 nm) is integrated at a few hundred nanometers distance from the sensor material, leading to sensor photoactivation with well controlled, uniform, and high irradiance conditions, and very low electrical power needs. The response curves to different NO2 concentrations as a function of the irradiance displayed a bell-like shape. Responses of 20% to 25 ppb of NO2 were already observed at irradiances of 5 mWatts·cm-2 (applying an electrical power as low as 30 µW). In the optimum illumination conditions (around 60 mWatts·cm-2, or 200 µW of electric power), responses of 94% to 25 ppb were achieved, corresponding to a lower detection limit of 1 ppb of NO2. Higher irradiance values worsened the sensor response in the parts-per-billion range of NO2 concentrations. The responses to other gases such as NH3, CO, and CH4 were much smaller, showing a certain selectivity toward NO2. The effects of humidity on the sensor response are also discussed.

Asunto(s)

Contaminantes Atmosféricos/análisis , Técnicas Electroquímicas/métodos , Dióxido de Nitrógeno/análisis , Técnicas Electroquímicas/instrumentación , Humedad , Luz , Límite de Detección , Nanopartículas del Metal/química , Nanopartículas del Metal/efectos de la radiación , Zinc/química , Zinc/efectos de la radiación

RESUMEN

We present a simple and inexpensive method to implement a Griess-Saltzman-type reaction that combines the advantages of the liquid phase method (high specificity and fast response time) with the benefits of a solid implementation (easy to handle). We demonstrate that the measurements can be carried out using conventional RGB sensors; circumventing all the limitations around the measurement of the samples with spectrometers. We also present a method to optimize the measurement protocol and target a specific range of NO2 concentrations. We demonstrate that it is possible to measure the concentration of NO2 from 50 ppb to 300 ppm with high specificity and without modifying the Griess-Saltzman reagent.

Asunto(s)

Técnicas de Química Analítica/instrumentación , Dióxido de Nitrógeno/análisis , Técnicas de Química Analítica/economía , Color , Límite de Detección , Dióxido de Nitrógeno/química , Factores de Tiempo

RESUMEN

Selectivity and low power consumption are major challenges in the development of sophisticated gas sensor devices. A sensor system is presented that unifies selective sensor-gas interactions and energy-harvesting properties, using defined organic-inorganic hybrid materials. Simulations of chemical-binding interactions and the consequent electronic surface modulation give more insight into the complex sensing mechanism of selective gas detection.

RESUMEN

Two- and four-probe electrical measurements on individual tin oxide (SnO(2)) nanowires were performed to evaluate their conductivity and contact resistance. Electrical contacts between the nanowires and the microelectrodes were achieved with the help of an electron- and ion-beam-assisted direct-write nanolithography process. High contact resistance values and the nonlinear current-bias (I-V) characteristics of some of these devices observed in two-probe measurements can be explained by the existence of back-to-back Schottky barriers arising from the platinum-nanowire contacts. The nanoscale devices described herein were characterized using impedance spectroscopy, enabling the development of an equivalent circuit. The proposed methodology of nanocontacting and measurements can be easily applied to other nanowires and nanometre-sized materials.