RESUMEN
Over the past decade, distributed acoustic sensing has been utilized for structural health monitoring in various applications, owing to its continuous measurement capability in both time and space and its ability to deliver extensive data on the conditions of large structures using just a single optical cable. This work aims to evaluate the performance of distributed acoustic sensing for monitoring a multilayer structure on a laboratory scale. The proposed structure comprises four layers: a medium-density fiberboard and three rigid polyurethane foam slabs. Three different damages were emulated in the structure: two in the first layer of rigid polyurethane foam and another in the medium-density fiberboard layer. The results include the detection of the mechanical wave, comparing the response with point sensors used for reference, and evaluating how the measured signal behaves in time and frequency in the face of different damages in the multilayer structure. The tests demonstrate that evaluating signals in both time and frequency domains presents different characteristics for each condition analyzed. The supervised support vector machine classifier was used to automate the classification of these damages, achieving an accuracy of 93%. The combination of distributed acoustic sensing with this learning algorithm creates the condition for developing a smart tool for monitoring multilayer structures.
RESUMEN
This paper proposes an approach to process the response of a distributed temperature sensor using a nonlinear autoregressive with external input neural network. The developed model is composed of three steps: extraction of characteristics, regression, and reconstruction of the signal. Such an approach is robust because it does not require knowledge of the characteristics of the signal; it has a reduction of data to be processed, resulting in a low processing time, besides the simultaneous improvement of spatial resolution and temperature. We obtain total correction of the temperature resolution and spatial resolution of 5 cm of the sensor.
RESUMEN
This paper presents an image reconstruction method to monitor the temperature distribution of electric generator stators. The main objective is to identify insulation failures that may arise as hotspots in the structure. The method is based on temperature readings of fiber optic distributed sensors (DTS) and a sparse reconstruction algorithm. Thermal images of the structure are formed by appropriately combining atoms of a dictionary of hotspots, which was constructed by finite element simulation with a multi-physical model. Due to difficulties for reproducing insulation faults in real stator structure, experimental tests were performed using a prototype similar to the real structure. The results demonstrate the ability of the proposed method to reconstruct images of hotspots with dimensions down to 15 cm, representing a resolution gain of up to six times when compared to the DTS spatial resolution. In addition, satisfactory results were also obtained to detect hotspots with only 5 cm. The application of the proposed algorithm for thermal imaging of generator stators can contribute to the identification of insulation faults in early stages, thereby avoiding catastrophic damage to the structure.