RESUMEN

OBJECTIVES: Maxillary lateral incisor agenesis (MLIA), treated orthodontically by space opening, requires complimentary aesthetic rehabilitation. Resin-bonded bridges (RBBs) can be equated as interim rehabilitation until skeletal maturity is achieved to place an implant-supported crown or as definitive rehabilitation in case of financial restrictions or implant contraindications. Scientific evidence of the best material must be confirmed in specific clinical situations. Computer-aided design and computer-aided manufacturing (CAD/CAM) materials are promising versatile restorative options. This study aimed to identify a straightforward material to deliver interim or definitive RBBs for nonprepared tooth replacement in MLIA. MATERIALS AND METHODS: Single-retainer RBB made from CAD/CAM ceramic blocks (Vita Enamic [ENA], Suprinity [SUP], and zirconia [Y-ZPT]) and a three-dimensional (3D) printed material (acrylonitrile butadiene styrene [ABS]) were evaluated by shear bond strength (SBS) and mode of failure, after adherence to an artificial tooth with RelyX Ultimate used in a three-step adhesive strategy. STATISTICAL ANALYSIS: The load to fracture (N) was recorded, and the mean shear stress (MPa) was calculated with standard deviations (SD) for each group and compared between materials using boxplot graphics. One-way analysis of variance (ANOVA) followed by the Tukey-Kramer post hoc test was used to compare the differences (α = 0.05). A meta-analysis focusing on CAD/CAM materials evaluated the magnitude of the difference between groups based on differences in means and effect sizes (α = 0.05; 95% confidence interval [CI]; Z-value = 1.96). Failure mode was determined by microscopic observation and correlated with the maximum load to fracture of the specimen. RESULTS: The mean ± SD SBS values were ENA (24.24 ± 9.05 MPa) < ABS (24.01 ± 1.94 MPa) < SUP (29.17 ± 4.78 MPa) < Y-ZPT (37.43 ± 12.20 MPa). The failure modes were mainly adhesive for Y-ZPT, cohesive for SUP and ENA, and cohesive with plastic deformation for ABS. CONCLUSION: Vita Enamic, Suprinity, Y-ZPT zirconia, and 3D-printed ABS RBBs are optional materials for rehabilitating MLIA. The option for each material is conditioned to estimate the time of use and necessity of removal for orthodontic or surgical techniques.

RESUMEN

Treatment of unilateral or bilateral maxillary lateral incisor agenesis is challenging, time-consuming, expensive, and requires careful treatment planning, predictability, and esthetics. This review aimed to identify differences in esthetic perception among orthodontists, general dentists, differentiated dentists, and laypersons, which may interfere with treatment options. EBSCO, PubMed, ScienceDirect, Cochrane Library databases, and Google Scholar were searched using keyword pairing and a Boolean expression, "(congenitally missing OR agenesis OR hypodontia) AND (maxillary lateral incisors) AND (esthetic perception OR smile) AND (laypersons OR dental professional OR general dentist OR orthodontists)." Reviews and case studies were excluded. A total of 13 studies were selected for qualitative analysis (adapted ROBINS-I) and 11 were selected for meta-analysis (p < 0.05) after being sub-grouped into "Opening vs. Closure" and "No remodeling vs. Dental remodeling vs. Dental and gingival remodeling" groups. A meta-analysis evaluated the magnitude of the difference between groups based on differences in means and effect sizes (α = 0.05; 95% CI; Z-value 1.96), revealing that the esthetic perception of maxillary lateral incisor agenesis treatment remains controversial even among professionals. Gingival remodeling was not valued compared to isolated dental remodeling. Studies lack rigorously comparable methodologies. Discussion with the patient is pertinent in doubtful situations, as the best treatment option remains unclear, and overtreatment should be avoided.

RESUMEN

Self-adhesive resin cements (SARCs) are used because of their mechanical properties, ease of cementation protocols, and lack of requirements for acid conditioning or adhesive systems. SARCs are generally dual-cured, photoactivated, and self-cured, with a slight increase in acidic pH, allowing self-adhesiveness and increasing resistance to hydrolysis. This systematic review assessed the adhesive strength of SARC systems luted to different substrates and computer-aided design and manufacturing (CAD/CAM) ceramic blocks. The PubMed/MedLine and Science Direct databases were searched using the Boolean formula [((dental or tooth) AND (self-adhesive) AND (luting or cement) AND CAD-CAM) NOT (endodontics or implants)]. Of the 199 articles obtained, 31 were selected for the quality assessment. Lava Ultimate (resin matrix filled with nanoceramic) and Vita Enamic (polymer-infiltrated ceramic) blocks were the most tested. Rely X Unicem 2 was the most tested resin cement, followed by Rely X Unicem > Ultimate > U200, and µTBS was the test most used. The meta-analysis confirmed the substrate-dependent adhesive strength of SARCs, with significant differences between them and between SARCs and conventional resin-based adhesive cement (α < 0.05). SARCs are promising. However, one must be aware of the differences in the adhesive strengths. An appropriate combination of materials must be considered to improve the durability and stability of restorations.

RESUMEN

STATEMENT OF PROBLEM: Computer-aided design and computer-aided manufacturing (CAD-CAM) blocks have evolved rapidly, making it difficult to establish the best clinical protocol for bonding a given block and whether an established protocol is appropriate for a newly introduced product. PURPOSE: This integrative systematic review and meta-analysis aimed to clarify whether the clinician can select the most efficient adhesion protocols for CAD-CAM blocks by reading published in vitro studies and implementing them in daily practice. MATERIAL AND METHODS: Based on the population, intervention, comparison, and outcome (PICO) strategy, 3 databases were searched for in vitro studies, randomized clinical trials, prospective or retrospective studies, and case reports from January 1, 2015, to July 31, 2021. A meta-analysis analyzed 28 studies to calculate the mean difference between best and worst protocols for each author and block with a random-effects model (α=.05). RESULTS: From 508 relevant studies, 37 in vitro studies, 2 clinical studies, and 1 clinical report were selected for data extraction and qualitative analysis. Vita Enamic, IPS e.max CAD, LAVA Ultimate, and Vita Mark II blocks were the most studied, and RelyX Ultimate was the most used luting cement. The meta-analysis confirmed the null hypothesis that the evidence-based efficacy of clinical protocols to bond CAD-CAM blocks is still controversial (P<.05). CONCLUSIONS: There are objective standards for individual in vitro tests, but the studies lack standardization. Some tested protocols were more efficient than others. Randomized clinical trials and well-documented clinical situations were almost nonexistent, making direct application of in vitro findings in clinical practice impossible.

RESUMEN

BACKGROUND: Mandibular second premolar (M2P) agenesis results in the second primary molar (2pm) retention, infraocclusion, a reduced alveolar height and width, the supraeruption of antagonists, or the movement of the adjacent teeth. Infraocclusion affects the survival of the retained 2pm to a greater extent than root resorption. OBJECTIVES: The aim of the study was to evaluate the lifespan of the primary molar as a substitute, with root quality and occlusal adaptation, in cases of M2P agenesis in a low-income population to determine if the attitude of just vigilance could be the best clinical option whenever other clinical problems are absent. MATERIAL AND METHODS: A total of 12,949 orthopantomograms were analyzed. Sixty-one patients (25 males and 36 females aged 7­36 years) were divided into group 1 (the first permanent molar in occlusion) and group 2 (the second permanent molar also in occlusion). Vertical positioning to the occlusal plane, root condition and the movement of the adjacent teeth were evaluated. RESULTS: Despite the study having a cross-sectional design, root resorption, infraocclusion, the distance between the first permanent molar and the first primary molar or the first permanent premolar, and the width of the 2pm were correlated with age. The 2pm root resorption increased with age, which was more pronounced when the second permanent molar was also in occlusion. The mesial movement of the adjacent teeth was absent in all groups. The 2pm was often occluded, but infraocclusion increased with age. Age periods of 11­15 years and 21­25 years were critical for the primary tooth loss. CONCLUSIONS: The second primary molar remains functional in the mandibular arch for up to 25 years. A well-documented no-intervention attitude based on clinical and radiographic data must be weighed in cases without orthodontic issues or with financial constraints.

Asunto(s)

RESUMEN

The preanalytical phase of saliva proteomics/peptidomics, which includes sample collection, handling, and storage, represents a major challenge for any researcher that envisions sensitive and high-throughput analyses, coupled to well-controlled study design. The methodology used to collect saliva determines the contribution of each salivary gland to saliva composition with impact on data retrieved from proteomics/peptidomics. The awareness of the importance of this step in the analysis of saliva has prompted the proposal of several collection strategies. Moreover, numerous commercial devices are available in an attempt to routine the procedures. However, whatever the chosen method, procedures should be kept simple, standardized to get better reproducibility and repeatability on saliva proteomics analysis. Sample preservation is also a key step in saliva proteomics/peptidomics, and the implemented lab procedures should avoid posttranslational modifications such as proteolysis, as well as protein precipitation.In this chapter, we provide recommendations for saliva sampling and preservation, envisaging to standardize procedures that facilitate the use of saliva in clinical applications and the translation of proteomics data to diagnosis and/or definition of therapeutic targets.

Asunto(s)

RESUMEN

Diabetic patients show a high susceptibility to oral diseases of inflammatory, catabolic and chronic nature with potential impact on saliva composition. In this study, our purpose was to characterize type 1 diabetes-induced alterations in the salivary peptidome aiming to find prospective biomarkers for type 1 diabetes oral health evaluation. Peptidomic analysis of saliva from controls (n = 5) and type 1 diabetic patients (n = 5) were performed by liquid chromatography followed by mass spectrometry. The proteolytic activity and metalloproteinases expression was accessed by zymography and slot blot analysis, respectively. Data evidenced a significant increase in the percentage of peptides in diabetic patients paralleled by a higher proteolytic activity, compared with healthy individuals. The nonsalivary gland protein fragments identified in saliva were mainly derived from collagen and extracellular matrix proteins, namely collagen type I. The cleavage site frequency analysis showed significant differences between healthy and type 1 diabetic individuals, highlighting the activity of proteases such as matrix metalloproteinase-9 and cathepsin D. Our results highlight salivary collagen fragments as potential biomarkers to follow up diabetes-related oral damage.

Asunto(s)

RESUMEN

OBJECTIVES: Assessment of the influence of maxillary lateral incisor agenesis (MLIA) on the facial morphogenesis. METHODS: Evaluation of the skeletal dimensions of the upper maxilla and its incisor region. Analysis was performed among three groups: individuals with MLIA, its relatives and the normal population. Among these a comparison between adults and growing individuals was performed. RESULTS: MLIA may interfere with the maxillary length and the anterosuperior facial height, negatively conditioning on its potential growth. MLIA was not correlated with changes of the palatine plane inclination, maxillary height nor with adjustment of the anterior nasal spine dimensions related to the Frankfurt plan or to the posterior nasal spine-Frankfurt plan during the observed development stage; the backward angle of the incisors in children with bilateral agenesis of lateral incisors appear to have been corrected in adulthood. CONCLUSIONS: MLIA is associated with an upper maxilla shortening, and appear to interfere significantly with the anterior facial height, reducing its potential size.

Asunto(s)

RESUMEN

The present study proposes a strategy for human in vivo acquired enamel pellicle (AEP) peptidome characterisation based on sequential extraction with guanidine and TFA followed by MALDI-TOF/TOF identification. Three different nanoscale analytical approaches were used: samples were subjected to tryptic digestion followed by nano-HPLC and mass spectrometry (MS and MS/MS) analysis. Undigested samples were analysed by LC-MS (both linear and reflector modes) and LC-MS/MS analysis, and samples were subjected to nano-HPLC followed by on-plate digestion and mass spectrometry (MS and MS/MS) analysis. The majority of the identifications corresponded to peptide/protein fragments of salivary protein, belonging to the classes: acidic PRPs, basic PRPs, statherin, cystatins S and SN and histatin 1 (all also identified in intact form). Overall, more than 90 peptides/proteins were identified. Results clearly show that peptides with acidic groups are enriched in the TFA fraction while peptides with no acidic or phosphate groups are prevalent on the guanidine extract. Also, phosphorylated peptides were observed mainly on the TFA fraction. Fragments present in the AEP show a predominance of cleavage points located at Arg, Tyr and Lys residues. Obtained data suggest that proteolytic activity could influence AEP formation and composition.

Asunto(s)

RESUMEN

Human acquired enamel pellicle is the result of a selective interaction of salivary proteins and peptides with the tooth surface. In the present work, the characterization of the peptides as well as the type of interactions established with the enamel surface was performed. Peptides from in vivo bovine enamel implants in the human oral cavity were sequentially extracted using guanidine and trifluoroacetic acid solutions and the fractions obtained were analysed by LC-MS and LC-MS/MS. Based on the LC-MS data, six phosphorylated peptides were identified in an intact form, strongly adsorbed to the enamel surface. Data from the LC-MS/MS analyses allowed us to identified 30 fragment peptides non-covalently bonded to enamel [basic proline-rich proteins, histatins (1 and 3) and acidic proline-rich protein classes]. The tandem mass spectrometry experiments showed the existence of a pattern of amide bond cleavage for the different identified peptide classes suggesting a selective proteolytic activity. For histatins, a predominance of cleavage at Arg, Lys and His residues was observed, while for basic proline-rich proteins, cleavage at Arg and Pro residues prevailed. In the case of acidic proline-rich proteins, a clearly predominance of cleavage of the Gln-Gly amide bond was evident.

Asunto(s)

RESUMEN

Caries onset and progression is influenced by diverse bacterial, dietary, environmental, socioeconomic and physiological risk factors. The most significant markers include caries experience, the concentrations of mutans-group streptococci and lactobacilli, as well as protective factors, such as the buffering capacity of saliva. The aim of this study was to evaluate and compare caries risk factors. The salivary parameters determined include: buffer capacity, cariogenic bacteria counts, pH, flow rate and total protein content. Individual aspects including hygiene and diet habits were also considered. Results showed that the value corresponding to the difference of stimulated saliva pH and resting saliva pH is positively correlated with DMFT index. Lactobacilli were positively correlated with mutans streptococci, as previously described for caries diagnostics. However, the results of this study were inconclusive, showing that salivary tests parameters either as single test or even in combination are incapable of predicting caries emphasising the importance of saliva composition.

Asunto(s)