RESUMEN
As drogas utilizadas para prevenção de convulsões podem impactar na movimentação dentária durante o tratamento ortodôntico. O objetivo deste estudo foi avaliar a influência de drogas anticonvulsivantes no tratamento ortodôntico. O desenho deste estudo é uma revisão narrativa da literatura onde uma busca eletrônica foi realizada sem restrição de idioma e data em três bases de dados (PubMed via MEDLINE, SCOPUS e BVS). Foram utilizados os seguintes termos para o PubMed e BVS: anticonvulsants drugs AND orthodontic movement e para o SCOPUS: anticonvulsants AND drugs AND orthodontic AND movement. Uma pesquisa complementar foi realizada nas referências bibliográficas dos estudos incluídos. Os artigos indicaram que o uso de medicação anticonvulsivante favorece o desenvolvimento de hiperplasias gengivais, xerostomia e alterações no metabolismo ósseo que modulam a taxa de movimentação ortodôntica. Dentro das limitações desta revisão, concluiu-se que não há contraindicações para tratamento ortodôntico em pacientes utilizando anticonvulsivantes, no entanto os ortodontistas devem estar cientes dos potenciais efeitos adversos advindos do uso desses medicamentos para que possam adotar medidas para mitigar esses riscos.
Drugs used to prevent seizures can have an impact on tooth movement during orthodontic treatment. This study aimed to evaluate the influence of anticonvulsant medications on orthodontic treatment. The design of this study is a narrative literature review in which an electronic search was carried out without language or date restriction in three databases (PubMed/MEDLINE, SCOPUS, and BVS). The following terms were used for PubMed and BVS: anticonvulsants drugs AND orthodontic movement and SCOPUS: anticonvulsants AND drugs AND orthodontic AND movement. A complementary search was carried out on the bibliographical references of the included studies. The articles indicated that using anticonvulsant medication favors the development of gingival hyperplasia, xerostomia, and alterations in bone metabolism that modulate the rate of orthodontic movement. Within the limitations of this review, it was concluded that there is no contraindication for orthodontic treatment in patients using anticonvulsants. However, orthodontists should be aware of the potential adverse effects arising from the use of these drugs so that they can adopt measures to minimize these risks.
RESUMEN
OBJECTIVE: To evaluate the long-term survival and success rates of implants placed in reconstructed areas using microvascularized or non-microvascularized extraoral bone grafts. MATERIALS AND METHODS: An electronic search was performed in five databases and in gray literature for articles published until June, 2023. The eligibility criteria comprised observational studies (prospective or retrospective) and clinical trials, reporting survival and success rates of implants placed in extraoral bone grafts. A meta-analysis (implant failure) was categorized into subgroups based on the type of bone graft used. The risk of bias within studies was assessed using the Newcastle-Ottawa Scale. RESULTS: Thirty-one studies met the inclusion criteria. The mean follow-up time was 92 months. The summary estimate of survival rate at the implant level were 94.9% (CI: 90.1%-97.4%) for non-vascularized iliac graft, 96.5% (CI: 91.4%-98.6%) for non-vascularized calvaria graft, and 92.3% (CI: 89.1%-94.6%) for vascularized fibula graft. The mean success rate and marginal bone loss (MBL) were 83.2%; 2.25 mm, 92.2%; 0.93 mm, and 87.6%; 1.49 mm, respectively. CONCLUSIONS: Implants placed in areas reconstructed using extraoral autogenous bone graft have high long-term survival rates and low long-term MBLs. The data did not demonstrate clinically relevant differences in the survival, success, or MBL of grafts from different donor areas or with different vascularization. This systematic review was registered in INPLASY under number INPLASY202390004.
Asunto(s)
Trasplante Óseo , Implantación Dental Endoósea , Implantes Dentales , Humanos , Trasplante Óseo/métodos , Implantación Dental Endoósea/métodos , Fracaso de la Restauración Dental , Aumento de la Cresta Alveolar/métodosRESUMEN
Bone critical-size defects and non-union fractures have no intrinsic capacity for self-healing. In this context, the emergence of bone engineering has allowed the development of functional alternatives. The aim of this study was to evaluate the capacity of ASC spheroids in bone regeneration using a synergic strategy with 3D-printed scaffolds made from poly (lactic acid) (PLA) and nanostructured hydroxyapatite doped with carbonate ions (CHA) in a rat model of cranial critical-size defect. In summary, a set of results suggests that ASC spheroidal constructs promoted bone regeneration. In vitro results showed that ASC spheroids were able to spread and interact with the 3D-printed scaffold, synthesizing crucial growth factors and cytokines for bone regeneration, such as VEGF. Histological results after 3 and 6 months of implantation showed the formation of new bone tissue in the PLA/CHA scaffolds that were seeded with ASC spheroids. In conclusion, the presence of ASC spheroids in the PLA/CHA 3D-printed scaffolds seems to successfully promote bone formation, which can be crucial for a significant clinical improvement in critical bone defect regeneration.
RESUMEN
This study aimed to analyze the physicochemical and histological properties of nanostructured hydroxyapatite and alginate composites produced at different temperatures with and without sintering and implanted in rabbit tibiae. Hydroxyapatite-alginate (HA) microspheres (425-600 µm) produced at 90 and 5 °C without (HA90 and HA5) or with sintering at 1000 °C (HA90S and HA5S) were characterized and applied to evaluate thein vitrodegradation; also were implanted in bone defects on rabbit's tibiae (n= 12). The animals were randomly divided into five groups (blood clot, HA90S, HA5S, HA90, and HA5) and euthanized after 7 and 28 d. X-ray diffraction and Fourier-transform infrared analysis of the non-sintered biomaterials showed a lower crystallinity than sintered materials, being more degradablein vitroandin vivo. However, the sinterization of HA5 led to the apatite phase's decomposition into tricalcium phosphate. Histomorphometric analysis showed the highest (p< 0.01) bone density in the blood clot group, similar bone levels among HA90S, HA90, and HA5, and significantly less bone in the HA5S. HA90 and HA5 groups presented higher degradation and homogeneous distribution of the new bone formation onto the surface of biomaterial fragments, compared to HA90S, presenting bone only around intact microspheres (p< 0.01). The elemental distribution (scanning electron microscope and energy dispersive spectroscopy andµXRF-SR analysis) of Ca, P, and Zn in the newly formed bone is similar to the cortical bone, indicating bone maturity at 28 d. The synthesized biomaterials are biocompatible and osteoconductive. The heat treatment directly influenced the material's behavior, where non-sintered HA90 and HA5 showed higher degradation, allowing a better distribution of the new bone onto the surface of the biomaterial fragments compared to HA90S presenting the same level of new bone, but only on the surface of the intact microspheres, potentially reducing the bone-biomaterial interface.
Asunto(s)
Durapatita , Trombosis , Animales , Conejos , Durapatita/química , Sincrotrones , Materiales Biocompatibles/química , Cerámica , Alginatos/químicaRESUMEN
Bone tissue engineering seeks biomaterials that enable cell migration, angiogenesis, matrix deposition, and tissue regeneration. Blood concentrates like platelet-rich fibrin (L-PRF) offer a cost-effective source of cells and growth factors to enhance healing. The present study aimed to evaluate heated serum albumin with liquid PRF (Alb-PRF) and L-PRF clinically and biochemically after placement in dental sockets following mandibular third molar extraction. In a controlled, split-mouth study involving 10 volunteers, 20 extracted molars were treated with either Alb-PRF or L-PRF. Post-extraction, pain, trismus, infection presence, and swelling were measured. The concentrations of different analytes in the surgical sites were also examined. The data were statistically analyzed, with significance defined at p < 0.05 (t-test). No significant difference was noted between the groups for pain and trismus, but Alb-PRF showed a significant reduction in swelling on day seven. The Alb-PRF group showed lower levels of pro-inflammatory cytokines (GM-CSF, IL-1b, IL-6, IFNy, IL-8, IL-15, RANTES, and MIP-1a) after seven days, with only higher expressions of MIP-1b, IL-1b, and MCP-1 found in the L-PRF group. Differences were observed in the release of analytes between L-PRF and Alb-PRF, with Alb-PRF significantly reducing edema after seven days. Alb-PRF reduced edema, while L-PRF increased inflammatory cytokines. When compared to L-PRF, Alb-PRF reduced edema and the release of inflammatory cytokines, suggesting promising effects in socket healing while underscoring the role of growth factors and cytokines in potential applications of blood concentrates.
RESUMEN
This systematic review (SR) aimed to evaluate the antimicrobial potential of different types of platelet-rich fibrin (PRF) often used in regenerative treatments. An electronic search was performed in four databases and in Gray literature for articles published until January, 2023. The eligibility criteria comprised in vitro studies that evaluated the antimicrobial effect of different types of PRF. For the analysis of the risk of bias within studies, the modified OHAT (Office of Health Assessment and Translation) tool was used. For the evaluation of the results, a qualitative critical analysis was carried out in the synthesis of the results of the primary studies. Sixteen studies published between 2013 and 2021 were included in this SR. The antimicrobial effects of PRF variations (PRF, injectable PRF [I-PRF], PRF with silver nanoparticles [agNP-PRF], and horizontal PRF [H-PRF]), were analyzed against 16 types of bacteria from the oral, periodontal, and endodontic environments. All types of PRF showed significant antimicrobial action, with the antibacterial efficacy being more expressive than the fungal one. The I-PRF, H-PRF, and agNP-PRF subtypes improve antimicrobial activity. According to the OHAT analysis, no study was classified as having a high risk of bias. Evidence suggests that PRF variations have significant antimicrobial activity, with bacterial action being greater than fungal. Evolutions such as I-PRF, H-PRF, and agNP-PRF improve antimicrobial activity. Future studies analyzing the clinical effect of these platelets are fundamental. This SR was registered in INPLASY under number INPLASY202340016.
RESUMEN
OBJECTIVE: This in vivo study, aimed to biomechanically, histomorphometrically and histologically evaluate an implant surface coated with nanostructured hydroxyapatite using the wet chemical process (biomimetic deposition of calcium phosphate coating) when compared to a dual acid-etching surface. MATERIAL AND METHODS: Ten sheep (2-4 years old) received 20 implants, 10 with nanostructured hydroxyapatite coating (HAnano), and 10 with dual acid-etching surface (DAA). The surfaces were characterized with scanning electron microscopy and energy dispersive spectroscopy; insertion torque values and resonance frequency analysis were measured to evaluate the primary stability of the implants. Bone-implant contact (BIC) and bone area fraction occupancy (BAFo) were evaluated 14 and 28 days after implant installation. RESULTS: The HAnano and DAA groups showed no significant difference in insertion torque and resonance frequency analysis. The BIC and BAFo values increased significantly (p<0.05) over the experimental periods in both groups. This event was also observed in BIC value of HAnano group. The HAnano surface showed superior results compared to DAA after 28 days (BAFo, p = 0.007; BIC, p = 0.01). CONCLUSION: The results suggest that the HAnano surface favors bone formation when compared to the DAA surface after 28 days in low-density bone in sheep.
Asunto(s)
Implantes Dentales , Oseointegración , Ovinos , Animales , Durapatita/química , Propiedades de Superficie , Materiales Biocompatibles Revestidos/química , Titanio/químicaRESUMEN
Amplamente utilizados para substituir dentes perdidos, os implantes dentários nos últimos anos vêm apresentando tecnologias como superfícies com micro e nanotopografia e ajustes nas composições químicas, dentre outros, para melhorar a osseointegração e reduzir o prazo de tratamento, permitindo, assim, carga funcional imediata ou precoce em pacientes com densidade óssea reduzida. Vários métodos são aplicados com intuito de modificar a superfície do implante, como jateamento com areia, corrosão ácida, oxidação anódica, tratamento com flúor, usinagem, pulverização de plasma de titânio e revestimento de fosfato de cálcio; esses métodos podem aumentar notavelmente a área de superfície quando operada a técnica adequadada de modificação, quer por procedimento de adição ou subtração. Tais modificações promovem superfícies rugosas, as quais aumentam a porcentagem de contato osso-implante (BIC) durante o processo de cicatrização óssea inicial. Os principais benefícios da modificação da superfície são melhorar a molhabilidade (hidrofilicidade), adesão e fixação de células a implantes e proliferação celular. Dentre os tratamentos de superfície de implantes dentários destaca-se o jateamento de areia com granulação grossa e ataque-ácido com HCL/H2SO4 (SLA) em altas temperaturas, o revestimento de superfície do implante com hidroxiapatita, oxidação anódica e o duplo ataque ácido. O objetivo deste trabalho é realizar uma revisão de literatura discutindo a importância e eficácia desses métodos para a osseointegração e, por conseguinte, para a redução do período de tratamento.
Widely used to replace lost teeth, dental implants have been presenting technologies such as surfaces with micro and nano topography and adjustments in chemical compositions, among others, to improve osseointegration and reduce treatment time, thus allowing immediate or early functional load in patients with reduced bone density. Several methods are applied to modify the implant surface, such as sandblasting, acid corrosion, anodic oxidation, fluoride treatment, machining, titanium plasma spraying, and calcium phosphate coating; these methods can notably increase the surface area when the appropriate modification technique is operated, either by the addition or subtraction procedure. Such modifications promote rough surfaces, which increase the percentage of bone-implant contact (BIC) during the initial bone healing process. The main benefits of surface modification are to improve wettability (hydrophilicity), adhesion and attachment of cells to implants, and cell proliferation. Among the surface treatments for dental implants, sandblasting with large grit and acid-etching with HCL/H2SO4 (SLA) stands out at high temperatures. The surface coating of the implant with hydroxyapatite, anodic oxidation, and double acid-etching. This work aims to conduct a literature review discussing the importance and effectiveness of these methods for osseointegration and, therefore, for reducing the treatment period.
Asunto(s)
Propiedades de Superficie , Terapéutica , Implantes Dentales , OseointegraciónRESUMEN
BACKGROUND: Zygomatic implants (ZI) have been frequently indicated to rehabilitate patients with extensive atrophies in alternatives to major bone reconstructions. It can be installed inside the maxillary sinus, called instrasinus zygomatic implant (IZI) or outside the maxillary sinus (EZI), depending on the surgery technique. OBJECTIVE: To evaluate the survival and complication rates of ZI in longitudinal studies when compared with conventional implants (CI). METHODS: An electronic search was performed in five databases and in Gray literature for articles published until April, 2022. The eligibility criteria comprised observational cohort studies (prospective or retrospective) and randomized clinical trials (RCTs) with at least 5 years of follow-up, reporting survival rate of ZI versus CI. A meta-analysis was conduct with 18 studies. RESULTS: A total of 5434 implants (2972 ZI and 2462 CI) were analyzed in 1709 patients. The mean survival rate was 96.5% ± 5.02 and 95.8% ± 6.36 for ZI and CI, respectively (mean follow-up time of 78 months). There were observed no statistically significant between ZI and CI in prospective studies (risk ratio [RR] of 1.21; 95% confidence intervals [CIs]: 0.28 to 5.28; chi-squared [Chi2 ] = 11.37; I2 = 56%; degrees of freedom [df] = 5; z-score = 0.25; P = 0.80), retrospective studies IZI (RR of 1.29; 95% CIs: 0.52 to 3.23; Chi2 = 4.07; I2 = 2%; df = 4; z-score = 0.55; P = 0.58) and retrospective studies EZI (RR of 0.72; 95% CIs: 0.31 to 1.66; Chi2 = 1.99; I2 = 0%; df = 3; z-score = 0.78; P = 0.44). The biological complications most related to ZI was sinusitis, followed by infection and oroantral communication. CONCLUSION: ZI have a high long-term survival rate (96.5% with a mean of 91.5 months of follow-up), showing no significant difference when compared with CI. The most prevalent biological complication is sinusitis, being most commonly to the IZI technique. This systematic review (SR) was registered in INPLASY under number INPLASY202280025.
Asunto(s)
Implantes Dentales , Sinusitis , Humanos , Implantación Dental Endoósea/efectos adversos , Implantación Dental Endoósea/métodos , Implantes Dentales/efectos adversos , Prótesis Dental de Soporte Implantado , Estudios de Seguimiento , Estudios Longitudinales , Maxilar/cirugía , Sinusitis/cirugía , Cigoma/cirugíaRESUMEN
Background and objectives: Calcium phosphates have been widely used as bone substitutes, but their properties are limited to osteoconduction. The association of calcium phosphates with osteoinductive bioactive molecules has been used as a strategy in regenerative medicine. Melatonin has been studied due to its cell protection and antioxidant functions, reducing osteoclastic activity and stimulating newly formed bone. This study aimed to evaluate the effect of topical application of melatonin associated with nanostructured carbonated hydroxyapatite microspheres in the alveolar bone repair of Wistar rats through histological and histomorphometric analysis. Materials and Methods: Thirty female Wistar rats (300 g) were used, divided randomly into three experimental groups (n = 10), G1: nanostructured carbonated hydroxyapatite microspheres associated with melatonin gel (CHA-M); G2: nanostructured carbonated hydroxyapatite (CHA); G3: blood clot (without alveolar filling). The animals were euthanized after 7 and 42 days of the postoperative period and processed for histological and histomorphometric evaluation. Kruskal-Wallis and Dunn's post-test were applied to investigate statistical differences between the groups at the same time point for new bone and connective tissue variables. Mann-Whitney was used to assess statistical differences between different time points and in the biomaterial variable. Results: Results showed a greater volume of residual biomaterial in the CHA-M than the CHA group (p = 0.007), and there were no significant differences in terms of newly formed bone and connective tissue between CHA and CHA-M after 42 days. Conclusions: This study concluded that both biomaterials improved alveolar bone repair from 7 to 42 days after surgery, and the association of CHA with melatonin gel reduced the biomaterial's biodegradation at the implanted site but did not improve the alveolar bone repair.
Asunto(s)
Melatonina , Ratas , Animales , Femenino , Melatonina/farmacología , Melatonina/uso terapéutico , Ratas Wistar , Materiales Biocompatibles/uso terapéutico , Durapatita , Fosfatos de Calcio/farmacología , Fosfatos de Calcio/uso terapéutico , CarbonatosRESUMEN
Background: Bioceramic nanometer coatings have been regarded as potential substitutes for plasma-sprayed hydroxyapatite coatings, and the association with bone morphogenetic protein (BMP) is an attempt to achieve faster osseointegration to hasten oral rehabilitation. Objective: This study aimed to investigate the effect of recombinant human bone morphogenetic protein-7 (rhBMP-7) on the osseointegration of titanium implants coated with a thin film surface of hydroxyapatite (HA). Methods: Two implants (n = 24) were placed in each white New Zealand rabbits' femur (n = 6). Implants were placed in the right femur after standard instrumentation (A and B) and in the left femur after an over-instrumentation (C and D), preventing bone-implant contact. The distal implants were installed associated with rhBMP-7 (groups B [regular instrumentation] and D [over-instrumentation]) and, also, in the absence of without BMP (control groups A [regular instrumentation] and C [over-instrumentation]). After 4 weeks, the animals were euthanized. The bone blocks containing the implants were embedded in methyl methacrylate and sectioned parallel to the long axis of the implant, which were analyzed by image segmentation. The data were analyzed using a nonparametric statistical method. Results: We observed that Group A had a mean bone formation of 35.6% compared to Group B, which had 48.6% (p > 0.05). Moreover, this group showed 28.3% of connective tissue compared to Group A, with 39.3%. In the over-instrumented groups, rhBMP-7 (Group D) showed an enhanced and significant increase in bone formation when compared with the group without rhBMP-7 (Group C). Conclusion: We concluded that the association of rhBMP-7 to thin nanostructure HA-coated implants promoted greater new bone area than the same implants in the absence of rhBMP-7, mainly in cases of over-instrumented implant sites.
RESUMEN
A Fibrina Rica em Plaquetas (PRF) é caracterizada por sua abrangente aplicabilidade na Odontologia. Neste sentido, a venopunção é uma etapa fundamental para sua obtenção. Tal procedimento consiste na identificação das veias superficiais, localizadas na região da fossa antecubital dos membros superiores, para que através da utilização do sistema a vácuo de coleta seja obtido o sangue venoso do paciente. O objetivo deste trabalho é realizar um guia prático abordando cada etapa que compreende a coleta sanguínea para produção do PRF permitindo sua reprodutibilidade de forma segura e eficiente.
Platelet Rich Fibrin (PRF) is characterized by its wide applicability in Dentistry. In this sense, venipuncture is a fundamental step towards obtaining it. Such procedure consists of the identification of superficial veins, located in the region of the antecubital fossa of the upper limbs, so that through the use of the vacuum collection system, the patient's venous blood is obtained. The objective of this work is to carry out a practical guide covering each step that comprises the blood collection for the production of the PRF allowing its reproducibility in a safe and efficient way.
Asunto(s)
Venas , Recolección de Muestras de Sangre , Odontología , Fibrina Rica en PlaquetasRESUMEN
Obter corretamente a Fibrina Rica em Plaquetas (PRF) depende da execução de cada etapa de maneira protocolada. Nesse sentido, no Laboratório Associado de Pesquisa Clínica (LPCO), da Faculdade de Odontologia da Universidade Federal Fluminense (FO-UFF) é utilizado o sistema IntraSpin® de centrifugação do sangue coletado, que caracteriza o segundo passo para preparo deste material autólogo. O objetivo do presente trabalho é realizar uma descrição prática do correto manuseio da Centrífuga IntraSpin para garantir a obtenção do PRF e sua efetiva aplicabilidade clínica.
Obtaining Platelet Rich Fibrin (PRF) correctly depends on the execution of each step in a protocol manner. In this sense, at the Associated Clinical Research Laboratory (LPCO), of the Faculty of Dentistry in the Federal Fluminense University (FO-UFF) the IntraSpin® centrifugation system is used in the collected blood, that characterizes the second step to prepare this autologous material. The objective of this present work is to make a practical description of the correct handling of the IntraSpin Centrifuge to guarantee the PRF's biocompatibility and its effective clinical applicability.
Asunto(s)
Centrífugas , Odontología , Fibrina Rica en PlaquetasRESUMEN
Peri-implantitis is characterized by nonreversible and progressive loss of supporting bone and is associated with bleeding and/or suppuration on probing. Peri-implant disease is considered as the main etiologic factor related to implant failure. Peri-implant disease has a pathogenesis similar to that of periodontal disease, both being triggered by an inflammatory response to the biofilm accumulation. Although the prevalence of peri-implantitis has been evaluated by several clinical studies with different follow-ups, there are currently little data on the impact of implant location and the prevalence of peri-implantitis. The aim of this review, therefore, was to summarize the evidence concerning the prevalence of peri-implantitis in relation to implant location and associated risk predictors. Even though most studies evaluating the prevalence of peri-implantitis in relation to implant location are cross-sectional or retrospective, they suggest that the occurrence of peri-implantitis is most prevalent in the anterior regions of the maxilla and mandible. Moreover, it seems that there is a higher prevalence of peri-implantitis in the maxilla than in the mandible.
Asunto(s)
Implantes Dentales , Periimplantitis , Estudios Transversales , Implantes Dentales/efectos adversos , Humanos , Maxilar/patología , Periimplantitis/epidemiología , Periimplantitis/etiología , Periimplantitis/patología , Estudios Retrospectivos , Factores de RiesgoRESUMEN
BACKGROUND: The degree of biodegradation and the inflammatory response of membranes employed for guided bone regeneration directly impact the outcome of this technique. This study aimed to evaluate four different experimental versions of Poly (L-lactate-co-Trimethylene Carbonate) (PTMC) + Poly (L-lactate-co-glycolate) (PLGA) membranes, implanted in mouse subcutaneous tissue, compared to a commercially available membrane and a Sham group. METHODS: Sixty Balb-C mice were randomly divided into six experimental groups and subdivided into 1, 3, 6 and 12 weeks (n = 5 groups/period). The membranes (1 cm2) were implanted in the subcutaneous back tissue of the animals. The samples were obtained for descriptive and semiquantitative histological evaluation (ISO 10993-6). RESULTS: G1 and G4 allowed tissue adhesion and the permeation of inflammatory cells over time and showed greater phagocytic activity and permeability. G2 and G3 detached from the tissue in one and three weeks; however, in the more extended periods, they presented a rectilinear and homogeneous aspect and were not absorbed. G2 had a major inflammatory reaction. G5 was almost completely absorbed after 12 weeks. CONCLUSIONS: The membranes are considered biocompatible. G5 showed a higher degree of biosorption, followed by G1 and G4. G2 and G3 are considered non-absorbable in the studied periods.
RESUMEN
OBJECTIVES: The objectives of the study were to investigate the long-term prevalence of taste disorder (TD) and olfactory disorder (OD) and associated risk factors in the non-hospitalized southeastern Brazil population of COVID-19 patients. METHODS: This cross-sectional open survey evaluated possible long-term OD and TD in non-hospitalized patients who had been diagnosed with COVID-19 for more than 30 days, through an online self-report questionnaire. Demographic data, comorbidities, symptoms, and the intensity of OD and TD at the time of diagnosis and at the time of completing the questionnaire were evaluated. RESULTS: Three hundred five responses were included. The reported prevalence of OD and TD was 72.9% and 67.4%, respectively, in the moment of diagnosis; after a mean follow-up period of 179 days, 45% and 50% still had some degree of the symptoms. There was a positive correlation between age and the high prevalence of OD (p = 0.02). However, there was no correlation between age and TD (p = 0.961) and weight in relation to OD/TD (p = 0.500 and p = 0.636, respectively). CONCLUSION: This study observed a high long-term prevalence of OD and TD associated with COVID-19, with a low recovery rate during the study period. There was a positive association between older participants and the prevalence of OD.
Asunto(s)
COVID-19 , Trastornos del Olfato , Humanos , COVID-19/epidemiología , Estudios Transversales , Gusto , SARS-CoV-2 , Trastornos del Olfato/epidemiología , Trastornos del Olfato/etiología , Prevalencia , Trastornos del Gusto/epidemiología , Trastornos del Gusto/etiologíaRESUMEN
Sticky bone, a growth factor-enriched bone graft matrix, is a promising autologous material for bone tissue regeneration. However, its production is strongly dependent on manual handling steps. In this sense, a new device was developed to simplify the confection of the sticky bone, named Sticky Bone Preparation Device (SBPD®). The purpose of this pilot study was to investigate the suitability of the SBPD® to prepare biomaterials for bone regeneration with autologous platelet concentrates. The SBPD® allows the blending of particulate samples from synthetic, xenograft, or autogenous bone with autologous platelet concentrates, making it easy to use and avoiding the need of further manipulations for the combination of the materials. The protocol for the preparation of sticky bone samples using the SBPD® is described, and the resulting product is compared with hand-mixed SB preparations regarding in vitro parameters such as cell content and the ability to release growth factors and cytokines relevant to tissue regeneration. The entrapped cell content was estimated, and the ability to release biological mediators was assessed after 7 days of incubation in culture medium. Both preparations increased the leukocyte and platelet concentrations compared to whole-blood samples (p < 0.05), without significant differences between SB and SBPD®. SBPD® samples released several growth factors, including VEGF, FGFb, and PDGF, at concentrations physiologically equivalent to those released by SB preparations. Therefore, the use of SBPD® results in a similar product to the standard protocol, but with more straightforward and shorter preparation times and less manipulation. These preliminary results suggest this device as a suitable alternative for combining bone substitute materials with platelet concentrates for bone tissue regeneration.
RESUMEN
A extração dentária é um dos procedimentos mais frequentes em cirurgia oral e maxilofacial e está relacionada a mudanças fisiológicas no processo alveolar. Neste sentido, entre as principais complicações transoperatórias está a hemorragia, que ocorre geralmente devido a lesões de vasos sanguíneos presentes no alvéolo dentário onde se realizou a exodontia. Uma alternativa para se obter a hemostasia é a utilização da Fibrina Rica em Plaquetas (PRF), um concentrado leucoplaquetário, obtido através do sangue do paciente. A membrana obtida é rica em leucócitos, plaquetas e fatores de crescimento que promovem a modulação de células envolvidas no processo de cicatrização, favorecendo um melhor e mais rápido reparo das lesões cirúrgicas. Esta matriz de fibrina apresenta diversas utilidades para a odontologia, demonstrando bons resultados, além do baixo custo e fácil obtenção. O objetivo deste artigo é descrever a técnica de obtenção da PRF usada como agente hemostático após exodontia, orientando assim, sua reprodutibilidade e utilização.
Tooth extraction is one of the most frequent procedures in oral and maxillofacial surgery and is related to physiological changes in the alveolar process. In this sense, among the main transoperative complications is hemorrhage, which usually occurs through the dental alveolus, due to damage to the blood vessels where the extraction was performed. An alternative to obtain hemostasis is the use of Fibrin Rich in Platelets (PRF), which is a white platelet concentrate obtained from the patient's blood that undergoes a centrifugation step. The membrane obtained after this process is rich in leukocytes, platelets and growth factors that promote modulation of cells involved in the healing process, favoring a better and faster repair of surgical lesions. This fibrin matrix has several uses for dentistry, showing good results, in addition to being low cost and easy to obtain. The aim of this article is to describe the technique for obtaining Platelet-Rich Fibrin (PRF) used as a hemostatic after tooth socket extraction, thus allowing its reproducibility and use.
Asunto(s)
Cirugía Bucal , Hemostáticos , Fibrina Rica en PlaquetasRESUMEN
Guided bone regeneration involves excluding non-osteogenic cells from the surrounding soft tissues and allowing osteogenic cells originating from native bone to inhabit the defect. The aim of this work was to fabricate, analyze antibiofilm activity and evaluate in vivo biological response of poly (lactic-co-glycolic acid) (PLGA) electrospun membranes incorporated with tea tree oil and furan-2(5H)-one. Samples were exposed to Streptococcus mutans culture and after 48 h incubation, biofilm was evaluated by colony forming units (CFU/mL) followed by scanning electron microscopy. Additionally, seventy-five Balb-C mice were divided into five experimental groups for subcutaneous implantation: tea tree oil loaded PLGA electrospun fiber membrane, furanone loaded PLGA electrospun fiber membrane, neat PLGA electrospun fiber membrane, a commercially available PLGA membrane -Pratix® and Sham (no-membrane implantation). Post implantation period of each experimental group (1, 3 and 9 weeks), samples were collected and processed for by histological descriptive and semiquantitative evaluation. Results showed a significant reduction of bacterial attachment on tea tree oil and furan-2(5H)-one incorporated membranes. Macrophage counts were significant found in all the materials implanted, although giant cells were predominantly associated with electrospun fiber membranes. The incorporation of antibiofilm compounds in nanofibers membranes did not incite inflammatory response significantly different in comparison with pure PLGA electrospun membranes, indicating its potential for development of novel functionalized membranes targeting the inhibition of bacterial biofilms on membrane-grafting materials.