RESUMEN
A sensitive and selective electrochemical method for the caffeine determination using bare boron-doped diamond electrode was developed. It was found that caffeine provided highly reproducible and well-defined irreversible oxidation peak at very positive potential. The effects of supporting electrolyte, pH and scan rate on the voltammetric response of caffeine oxidation were studied to select the optimum experimental conditions. Linear response of peak current on the concentration in the range from 4×10(-7) to 2.5×10(-5)M, good repeatability (RSD of 2.1%) and detection limit of 1.5×10(-7)M without any chemical modifications and electrochemical surface pretreatment were evaluated. The effect of possible interferents appeared to be negligible which evidently proved very good selectivity. The proposed method was successfully applied for the caffeine determination in commercially available beverage samples, with results in a close statistical agreement to those declared by manufacturer and HPLC used as independent method.
Asunto(s)
Bebidas/análisis , Cafeína/análisis , Electroquímica/métodos , Diamante/química , Electroquímica/instrumentación , Electrodos , Límite de Detección , Oxidación-ReducciónRESUMEN
Simple, sensitive and selective differential pulse voltammetric method for determination of penicillin V on a bare (unmodified) boron-doped diamond electrode has been developed. Penicillin V provided highly reproducible and well-defined irreversible oxidation peak at very positive potential of +1.6V (vs. Ag/AgCl). The optimum experimental conditions for oxidation of penicillin V were achieved in acetate buffer solution (pH 4.0). The modulation amplitude of 0.1V, modulation time of 0.05s and scan rate of 0.05Vs(-1) were selected as optimum instrumental parameters for differential pulse voltammetry. Linear response of peak current on the concentration in the range from 0.5 to 40µM with coefficient of determination of 0.999, good repeatability (RSD of 1.5%) and detection limit of 0.25µM were observed without any chemical modifications and electrochemical surface pretreatment. The effect of possible interferents such as stearic acid, glucose, urea, uric acid and ascorbic acid appeared to be negligible which evidently proved the good selectivity of method. The practical analytical utility of proposed method was demonstrated by determination of penicillin V in pharmaceutical formulations (tablets) and human urine samples with satisfactory recoveries (from 98 to 101% for tablets and 97 to 103% for human urine).
Asunto(s)
Boro/química , Diamante/química , Electroquímica/métodos , Penicilina V/análisis , Penicilina V/orina , Química Farmacéutica , Electroquímica/economía , Electroquímica/instrumentación , Electrodos , Humanos , Concentración de Iones de Hidrógeno , Oxidación-Reducción , Penicilina V/química , Comprimidos , Factores de TiempoRESUMEN
A novel technique based on dynamic electrochemistry for the detection of fluoride ions was developed. It is based on its strong complexation with ferric ion. Formed fluoroferric complex is cathodically inactive at the potential of the reduction of free ferric aquo ion. The voltammetric and amperometric response of platinum comb-shaped interdigitated microelectrode array is decreased after fluoride addition. This decrease serves for the quantification of fluoride ions added to the solution. The detection limit of 4.5×10(-5) mol dm(-3) was achieved when one of the segments of interdigitated microelectrode array (IDA) was used as an indicating electrode. The detection limit is about one order of magnitude lower than in the case of conventional platinum macroelectrode. In comparison with ISE electrodes this method is faster and also avoiding large error resulting from the antilogarithmization of ISE Nerstian response. The method was applied to the analysis of toothpaste.
Asunto(s)
Electroquímica/métodos , Fluoruros/química , Pastas de Dientes/química , Microelectrodos , Potenciometría/métodosRESUMEN
An interdigitated microelectrode array (IDA) was applied to the determination of formaldehyde released from textiles produced in industry. The proposed method is based on formaldehyde reaction with hypobromite which is formed in weakly basic media by control current electrooxidation of bromide on the generator segment of the IDA array. The unreacted hypobromite diffuses through the gap between individually polarisable IDA segments and it is amperometrically detected on the collector segment of the IDA. The efficiency of this nonconvective transfer process in the absence of formaldehyde was substantially higher (78%) in comparison with that when using the rotating ring disc electrode. The influence of the added formaldehyde on the transfer process can be utilised to develop a simple and sensitive analytical procedure for formaldehyde detection with a detection limit of 4 x 10(-6) mol dm(-3).