RESUMEN

PURPOSE: To develop a predictive scoring system to identify traumatic cervical spine injury patients at a high risk of having multilevel noncontiguous spinal fractures. METHODS: This 12-year retrospective observational cohort study included 588 traumatic cervical spine-injured patients. Patients were categorized into two groups: patients with multilevel noncontiguous spinal fractures and patients without this remote injury. Potential risk factors were examined using multivariable analysis to derive a predictive risk score from independent predictors. Results are presented as odds ratio with a 95% confidence interval (95% CI). The accuracy of the calculated predicted score was demonstrated by the area under the receiver operating characteristic curve (AuROC). RESULTS: The incidence of noncontiguous fracture among the patients was 17% (100 of 588). The independent risk factors associated with multilevel noncontiguous spinal fractures were motor weakness, intracranial injury, intrathoracic injury, and intraabdominal injury. The AuROC of the prediction score was 0.74 (95% CI 0.69, 0.80). The patients were classified into three groups, low-risk group (score< 1), moderate-risk group (score 1-2.5), and high-risk group (score≥ 3), based on the predicted risk of multilevel noncontiguous spinal fractures. CONCLUSIONS: This tool can potentially help preventing the missed diagnosis of cervical spine injuries with multilevel noncontiguous spinal fractures. CT scans or MRI of the entire spine to investigate remote multilevel noncontiguous spinal fractures may have a role in cervical spine-injured patients who have at least one of the independent risk factors and are strongly suggested for patients with scores in the high-risk group.

Asunto(s)

RESUMEN

Background: Adult spinal deformity, especially sagittal imbalance, is affecting health-related quality-of-life (HRQOL) scores. There is a lack of emphasis in the comparison of cervical sagittal parameters in patients with degenerative cervical spondylolisthesis and degenerative cervical kyphosis. The aim of study is to determine the preoperative and postoperative cervical sagittal parameters in myeloradiculopathic patients with degenerative cervical spondylolisthesis and degenerative cervical kyphosis treated by anterior cervical discectomy and fusion (ACDF). Methods: A retrospective medical records and radiographic study of 30 adult patients were reviewed. Fifteen patients with degenerative cervical spondylolisthesis and 15 patients with degenerative cervical kyphosis have been performed ACDF from 2010-2020. We measured the preoperative and postoperative cervical sagittal parameters: C0-C2 angle, C1-C2 angle, C2-C7 angle, C2-C7 sagittal vertical axis (SVA), T1 slope, neck tilt angle and thoracic inlet angle. Minimum follow-up period was at least 2 years. Results: Patients in degenerative cervical kyphosis group have C2-C7 angle less than degenerative cervical spondylolisthesis group (-14.88±7.32 vs. 9.60±13.60), leading to increase the mismatch between T1 slope and C2-C7 angle in kyphotic group and hyperlordosis of C0-C2 angle and C1-C2 angle (31.13±7.68, 37.88±5.08) compare with spondylolisthesis group (13±10.20, 24.60±10.70). Whereas patients with degenerative cervical spondylolisthesis have C2-C7 SVA (33.22±13.92) more than kyphosis group (13.70±13.60). After surgery, there is significant increase of the C2-C7 angle in the kyphosis group compare before and after surgery (-14.88±7.32 vs. 4.10±11.80). While the spondylolisthesis group has no significantly different parameters compare to before surgery. However, the postoperative cervical sagittal parameters of all patients are within the normal thresholds (T1-Slope minus C2-C7 lordosis <15° and C2-C7 SVA <40 mm). Conclusions: The study demonstrates the difference of sagittal parameters between degenerative cervical spondylolisthesis and kyphosis before and after surgery. ACDF not only provides neural decompressive procedure, but also corrects the regional cervical sagittal parameters.

RESUMEN

Background: Traumatic atlantoaxial dislocation combined with locked atlas lateral mass and odontoid process fracture is a complex injury and is extremely rare. We describe the surgical technique by presenting a clinical case study in managing a traumatic lateral atlantoaxial dislocation combined with a locked atlas lateral mass and a type II odontoid fracture (Grauer type IIB). Case description: This is a clinical case study of a 38-year-old female patient who presented with severe neck pain without neurological deficit following a traffic accident. Computed tomography showed a type IIB odontoid fracture and a lateral C1-C2 dislocation with a laterally locked left lateral mass at the C1-C2 level. Emergency management included protecting the cervical spine and applying gradually increasing skull traction. The locked lateral mass and laterally-dislocated C1-C2 facet joints were partially reduced. An intraoperative joint reduction operation with leverage technique was then performed. Posterior C1-C2 fixation (a modified Harms-Goel technique) and fusion with iliac bone graft were then executed. Outcome: Postoperatively, neck pain improved significantly. The atlantoaxial joint was successfully reduced and stabilized. Solid bony fusion was confirmed by a radiographic study at the 1-year follow-up. Conclusions: Based on a review of current literature, traumatic lateral atlantoaxial dislocation combined with a locked atlas lateral mass and type IIB odontoid fracture is rarely seen. It is an extremely unstable injury. Our proposed leverage technique used in conjunction with a modified Harms-Goel technique is an effective alternative treatment. This approach can assist surgeons in the management of these difficult cases.

RESUMEN

PURPOSE: To compare the Atlas (C1) lateral mass screw placement between screw trajectories of 0° and 15° medial angulation while using the intersection between lateral mass and inferomedial edge of the posterior arch. METHODS: Forty-eight Atlas lateral masses were prepared and divided into 2 groups: Group 1; screws inserted at 3 mm lateral to the reference point with screw trajectory of 0° angulation(N = 24) and Group 2; those inserted with screw trajectory of 15° medial angulation(N = 24). We evaluated the atlas anatomy, screw purchase and the presence of any breaches using CT scan. RESULTS: The radiographic parameters for Groups 1 and 2 were found statistically different (p-value < 0.05): bilateral intraosseous screw lengths (17.92 ± 1.47 mm. vs. 20.71 ± 2.4 mm.), bilateral screw length (29.92 ± 1.72 mm. vs. 33.13 ± 1.78 mm.), left screw medial angulation (x°) (0.67° ± 0.78° vs.14.17° ± 3.51°), right screw medial angulation (y°) (0.83° ± 1.03° vs.14.25° ± 2.53°) and bilateral screw medial angulation (0.75° ± 0.9° vs. 14.21° ± 2.99°). Twenty-two screws (91.67%) using the 0° medial angulation and nineteen screws (79.17%) using the 15° medial angulation had no cortical violations (Grade 0). However, two screws (8.33%) with 0° medial angulation and five screws (20.83%) with 15° medial angulation had breach less than 2 mm (Grade 1). There were no screws with breach between 2 and 4 mm (Grade 2) or greater than 4 mm. (Grade 3). CONCLUSION: A starting point of 3-mm lateral to the intersection between lateral mass and inferomedial edge of the Atlas posterior arch can be safely and effectively used to insert C1 lateral mass using both 0° and 15° medial angulation.

Asunto(s)

RESUMEN

INTRODUCTION AND IMPORTANCE: Acute radiculopathy caused by upper lumbar synovial cysts is rare. They generally present with a slow development of symptoms resulting from spinal canal involvement. Intracyst hemorrhagic synovial cysts are extremely uncommon and can manifest as radicular pain, radiculopathy or even cauda equina compression syndrome. CASE PRESENTATION: A 71-year-old woman with acute back and radicular leg pain presented with worsening symptoms after receiving 1 week of therapy to the left lower limb without trauma. Magnetic resonance imaging (MRI) showed a hemorrhagic synovial intracyst at L2-L3 on the front of the left inter-facet joint which was identified as the cause of the acute back pain and radiculopathy which required surgical removal. Post-surgery, the patient followed the rehabilitation program instructions and attended all scheduled follow-up visits. The patient was asymptomatic at the one-year follow-up. CLINICAL DISCUSSION: Synovial cysts are commonly associated with degenerative changes that occur with aging, although the specific cause is unknown. Surgical removal of an upper lumbar synovial cyst gives better results than non-surgical treatments if the symptoms persist or recurrent. CONCLUSION: For recurrent symptomatic upper lumbar spine synovial cysts (L2-L3), surgery is usually the best option. Surgical removal of an upper lumbar synovial cyst can result in full relief of acute symptoms and reduction of neurologic deficits.

RESUMEN

BACKGROUND: Creating a rectangular disc space is an important step during anterior cervical discectomy and fusion or cervical total disc replacement. The study aims to determine the accuracy of Caspar pin insertion by using a novel Adjustable Caspar Pin Aiming Device in anterior cervical procedures. METHODS: Forty Caspar pins were placed using an Adjustable Caspar Pin Aiming Device in 20 human cadaveric cervical vertebral bodies from C3 to C7 after performing anterior discectomies. Accuracy of pin placement was assessed by lateral fluoroscopy, considering superior endplate slope (SE), inferior endplate slope (IE), Caspar pin slope (CP), and endplate-Caspar pin slope difference (SE/CP, IE/CP). RESULTS: The mean superior endplate slope (SE), inferior endplate slope (IE), and Caspar pin slope (CP) were 10.82 ± 2.3°, 10.32 ± 3.2°, and 15.58 ± 7.9°, respectively. The average superior endplate-Caspar pin slope difference (SE/CP) and inferior endplate-Caspar pin slope difference (IE/CP) were 6.6 ± 0.8° and 7.7 ± 0.8°, respectively. The greatest slope difference was observed at the superior and inferior endplates of C3. No cervical endplate violations occurred. CONCLUSION: Adjustable Caspar Pin Aiming Device allowed for a highly accurate Caspar pin placement with the average endplate-Caspar pin slope difference of less than 7.7°. It results in accurate placement of the superior and inferior Caspar pins parallel to the index vertebral endplates. Furthermore, it appears to facilitate the safe and effective insertion of Caspar pins for anterior cervical procedures.

Asunto(s)

RESUMEN

INTRODUCTION: and importance: Forestier's disease, also known as a vertebral ankylosing hyperostosis or Diffuse Idiopathic Skeletal Hyperostosis (DISH), is a non-inflammatory enthesopathy that affects primarily elderly males and ossifies the anterolateral spine while sparing the intervertebral discs and joint spaces, especially at the cervical spine. Forestier's disease has resulted in the growth of large anterior cervical osteophytes that may compress the pharyngoesophageal region, producing dysphagia. However, symptomatic Forestier's disease presenting with dysphagia and cervical myelopathy is rarely observed. CASE PRESENTATION: A 48-year-old male presented with progressive dysphagia and cervical myelopathy. Based on the presence of radiographic study, Forestier's disease was suspected. Large anterior cervical osteophytes at C4-C6 levels compressed the pharyngoesophageal structure posteriorly. Multilevel degenerative discs compressing the C4 to C6 spinal cord were also seen on sagittal MRI T2-weighted images. Anterior cervical osteophytectomy with anterior cervical discectomy and fusion (ACDF) were performed. The patient made a complete neurological recovery and had no recurrent symptoms at the 5-year follow-up. The patient was extremely satisfied with this treatment and can improved his quality of life (QOL). CLINICAL DISCUSSION: Treatment of symptomatic Forestier's disease with secondary dysphagia and cervical myelopathy is rare evidenced by the dearth of reports on surgical treatment. Surgical intervention appears to be safe, effective, and able to halt disease progression. CONCLUSION: Anterior cervical osteophytectomy combined with ACDF with plate fixation is a preferred technique in both neural decompression and swallowing improvement. Surgical intervention, we consider, provides superior results than prolonged non-surgical treatments.

RESUMEN

Objectives: To summarize the current evidence on surgical treatment for large bridging osteophytes of the anterior cervical spine from Diffuse Idiopathic Skeletal Hyperostosis (DISH). Overview of Literature: In the current review, the surgical treatment of secondary dysphagia from DISH was the most useful treatment. We propose a treatment algorithm for management of this condition because currently there are only case reports and retrospective studies available. Methods: Literature search was performed using the MeSH terms "Anterior Cervical Osteophyte," "Diffuse Idiopathic Skeletal Hyperostosis (DISH)," and "Dysphagia" and "Treatment" for articles published between January 2000 and February 2020. PubMed search identified 117 articles that met the initial screening criteria. Detailed analysis identified the 40 best matching articles, following which the full inclusion and exclusion criteria left 11 articles for this review. Results: Incidence of secondary dysphagia was associated with DISH in elderly patients (average 65 years). The major clinical findings were dysphagia or respiratory compromise, with the most common level of bridging osteophytes of the cervical spine at C3-C5. There were 10 articles on surgical treatment involving anterior cervical osteophytectomy without fusion, 1 for multilevel cervical oblique corpectomy, 1 for anterior cervical discectomy with fusion plus plate, and 1 for anterior cervical osteophytectomy with stand-alone PEEK cage or plus plate. All the cases resulted in significant improvement without recurrence, with only 1 case having post-operative complications. Follow-up duration was 3-70.3 months. Conclusions: Surgical intervention for anterior cervical osteophytectomy appears to result in improved outcomes. However, there could be disadvantages concerning cervical spine motion if cervical osteophytectomy with cervical discectomy and fusion (ACDF) plus plate system is done.

Asunto(s)

RESUMEN

INTRODUCTION AND IMPORTANCE: Adjacent cervical spondylotic myelopathy (CSM) following anterior cervical discectomy and fusion (ACDF) presenting as a retro-odontoid pseudotumor (ROP) is uncommon. This consequence adversely affects hand function, causes gait imbalance and results in other disabilities for the patient. This report describes the successful surgical treatment of a patient with ROP associated with adjacent CSM following multilevel ACDF of the subaxial cervical vertebrae by performing posterior cervical decompression and fusion. CASE PRESENTATION: A 60-year-old-male presented with progressive, disabling cervical myelopathy. He had undergone ACDF C3-C7 for treatment of CSM 16 years ago and his symptoms had fully resolved. Magnetic resonance imaging (MRI) revealed severe cervical spinal cord compression caused by a retro-odontoid mass at the C1-C2 level with upper adjacent segment disease (ASD) of C1-C3. The patient received C1-C3 posterior cervical spinal fusion by C1 lateral mass C2 and C3 pedicle screw fixation and C1-C3 laminectomy. After the surgery, he was able to ambulate independently and the myelopathic symptoms were significantly improved at the 6 months follow-up. CLINICAL DISCUSSION: Retro-odontoid pseudotumor concomitant with proximal ASD following ACDF is a rare occurrence. Both diagnosis and surgical management are challenging. CONCLUSIONS: Posterior cervical decompression and fusion of C1-C3 is an effective option for treatment of severe cervical spinal cord compression by a retro-odontoid mass at the C1-C2 level combined with ASD after ACDF.

RESUMEN

Displaced nonunited type II odontoid fracture can result in atlantoaxial instability, causing delayed cervical myelopathy. Both Magerl's C1-C2 transarticular screw fixation technique and Harms-Goel C1-C2 screw-rod segmental fixation technique are effective techniques to provide stability. This study aimed to demonstrate the results of two surgical fixation techniques for the treatment of reducible nonunited type II odontoid fracture with atlantoaxial instability. Medical records of patients with reducible nonunited type II odontoid fracture hospitalized for spinal fusion between April 2007 and April 2018 were reviewed. For each patient, specific surgical fixation, either Magerl's C1-C2 transarticular screw fixation technique augmented with supplemental wiring or Harms-Goel C1-C2 screw-rod fixation technique, was performed according to our management protocol. We reported the fusion rate, fusion period, and complications for each technique. Of 21 patients, 10 patients were treated with Magerl's C1-C2 transarticular screw fixation technique augmented with supplemental wiring, and 11 were treated with Harms-Goel C1-C2 screw-rod fixation technique. The bony fusion rate was 100% in both groups. The mean time to fusion was 69.7 (95%CI 53.1, 86.3) days in Magerl's C1-C2 transarticular screw fixation technique and 75.2 (95%CI 51.8, 98.6) days in Harms-Goel C1-C2 screw-rod fixation technique. No severe complications were observed in either group. Displaced reducible, nonunited type II odontoid fracture with cervical myelopathy should be treated by surgery. Both fixation techniques promote bony fusion and provide substantial construct stability.

Asunto(s)

RESUMEN

BACKGROUND: Restoration of cervical lordosis after anterior discectomy and fusion is a desirable goal. Proper insertion of the vertebral distraction or Caspar pin can assist lordotic restoration by either putting the tips divergently or parallel to the index vertebral endplates. With inexperienced surgeons, the traditional free-hand technique for Caspar pin insertion may require multiple insertion attempts that may compromise the vertebral body and increase radiation exposure during pin localization. Our purpose is to perform a proof-of-concept, feasibility study to evaluate the effectiveness of a pin insertion aiming device for vertebral distraction pin insertion. METHODS: A Smith-Robinson approach and anterior cervical discectomy were performed from C3 to C7 in 10 human cadaveric specimens. Caspar pins were inserted using a novel pin insertion aiming device at C3-4, C4-5, C5-6, and C6-7. The angles between the cervical endplate slope and Caspar pin alignment were measured with lateral cervical imaging. RESULTS: The average Superior Endplate-to-Caspar Pin angle (SE-CP) and the average Inferior Endplate-to-Caspar Pin angle (IE-CP) were 6.2 ± 2.0° and 6.3 ± 2.2° respectively. For the proximal pins, the SE-CP and the IE-CP were 4.0 ± 1.1°and 5.2 ± 2.4° respectively. For the distal pins, the SE-CP and the IE-CP were 7.7 ± 1.4° and 6.2 ± 2.0° respectively. No cervical endplate violations occurred. CONCLUSION: The novel Caspar pin insertion aiming device can control the pin entry points and pin direction with the average SE-CP and average IE-CP of 6.2 ± 2.0° and 6.3 ± 2.2°, respectively. The study shows that the average different angles between the Caspar pin and cervical endplate are less than 7°.

Asunto(s)

RESUMEN

OBJECTIVE: To determine the ideal Atlas (C1) lateral mass screw placement and trajectory using the intersection between the lateral mass and inferomedial edge of the posterior arch as an easily identifiable and reproducible medial reference point. Selection of an ideal entry point and trajectory of C1 lateral mass screw insertion can help to minimize neurovascular injuries. While various techniques for screw insertion have been proposed in the past, they all require extensive dissection of the C1 lateral mass, which can cause profuse bleeding. METHODS: Ninety-three 3-dimensional computed tomography reconstructed images of C1 lateral masses in adult patients were utilized to simulate the placement of C1 lateral mass screws via 4 entry points and 2 trajectory angles referencing off of a medial reference point using Vero's VISI 17 software. The safety during screw insertion simulation, as well as the screw length, were evaluated. RESULTS: We found that C1 lateral mass screws could be safely placed bilaterally at 3 mm lateral to the reference point in both 0° and 15° medial screw angulation without violation of the cortex. The 15° medial angulation allowed for longer (18 mm) screws than the 0° angulation. CONCLUSION: We recommend starting C1 lateral mass screws 3 mm lateral to the intersection between the lateral mass and inferomedial edge of the posterior arch at a 15° medial angulation.

RESUMEN

Talaromyces marneffei infection (TMI) causing vertebral osteomyelitis of the cervical spine is extremely rare. TMI in an HIV-uninfected patient is also unusual. This report presents the successful treatment of an HIV-uninfected TMI patient who underwent C6 and T1 vertebrectomies, bone grafting, and anterior cervical plating accompanied by antifungal therapy. A 63-year-old woman was diagnosed with adult-onset immune deficiency. She suddenly developed progressive neck pain without neurologic deficit. The plain radiographs and magnetic resonance imaging showed inflammation and abscess formation along the prevertebral area from C3-4 to T2-3 with vertebral body destruction. Intraoperative pus culture and tissue specimens were determined to be T marneffei. The patient was treated intravenously with amphotericin B deoxycholate for 4 weeks (0.6 mg/kg/d) and oral itraconazole (400 mg/d) for 12 months. Over a 2 consecutive year follow-up period, she achieved a full recovery with an absence of neck pain.

Asunto(s)

RESUMEN

BACKGROUND: Neglected fracture-dislocation thoracic spine without neurological deficit is an extremely rare injury. Current studies reveal that global sagittal balance is very important for quality of life (QOL). Complex deformity causes difficulty with dissection in the surgical planning and type of spinal osteotomy. Restoration of global balance parameters are related to a successful outcome, if the surgeon understands the morphology of complex bone deformity and the surgical tactics of spinal osteotomy. CASE PRESENTATION: A 23-year-old female presented with untreated thoracic kyphotic deformity without paraplegia (ASIA E), following a motor vehicle accident 2 months earlier. Radiographic imaging and computed tomography scan revealed a complex fracture-dislocation at the T8-T9 level with kyphosis deformity, abnormal C7 plump line, and 65 degrees of sagittal Cobb's angle (T7-T11). The multilevel Ponte osteotomy surgical technique was performed at the apex of the kyphosis. After the patient underwent corrective osteotomy and instrumentation, postoperative radiograph and CT scan revealed 24 degrees of sagittal Cobb's angle (T7-T11). The patient's balance was recovered when followed up at 1 year. The patient's quality of life was improved and thus she was extremely satisfied with this treatment. CONCLUSION: Neglected fracture-dislocation thoracic spine without neurological deficit is rarely seen. It is a complex deformity injury. In this case, we performed multilevel Ponte osteotomy, instead of osteosynthesis, to restore the complex deformity that was affecting global balance. Successful outcomes are the result of good surgical preoperative planning and the surgical tactics of spinal osteotomy.

RESUMEN

BACKGROUND Hiccups induced by steroids administration is not common. Although it is not life-threatening and is always recognized as a transient and minor complication, it can be severely uncomfortable and significantly diminished patient quality of life. In this case report, persistent hiccups were observed in 2 middle-aged Thai men receiving low-dose intravenous dexamethasone. This case report highlights the awareness of severe dexamethasone-induced hiccups. CASE REPORT A 49-year-old man and a 38-year-old man were admitted to our hospital and received IV dexamethasone. The hiccups started after each patient received a single dose of dexamethasone. The frequency and severity of their hiccups increased over time during dexamethasone treatment. Hiccups still continued to occur despite the discontinuation of dexamethasone and lasted for 72 h after drug termination. CONCLUSIONS Dexamethasone can cause persistent hiccups. Although hiccups are not life-threatening, it should not be neglected since it can be severely uncomfortable and significantly diminish patient quality of life. Termination of dexamethasone can gradually relieve hiccups. Dexamethasone should be used cautiously and clinicians must be aware of this undesirable effect.

Asunto(s)

RESUMEN

BACKGROUND: A screw larger than 4.0-4.5-mm-diameter screw has now become the preferred sizefor providing maximum anchorage during atlantoaxial segmental fixation and transarticular screw fixation. At present, there are no studies available of Axis (C2) morphology related to screw placement specifically in Thai patients, a situation that might result in surgical complications. OBJECTIVE: The purpose ofthis study was to determine the typical width, height and angulations in both C2 pars interarticularis and C2 pedicle in Thai population. MATERIAL AND METHOD: A radiographic-based study was conducted in 54 Thai patients aged over 20 from July 2011 to January 2012 in Chiang Mai University Hospital. C2 parameters including the height, width, medial angulation and superior angulation of the pars interarticularis and the pedicle were measured by using a CT scan. Allparameters were measured using the ONIS 2.3 program. RESULTS: The C2 pedicle in Thais was found to have a mean width of 5.47 mm (range 3.28-6.81 mm), a height 7.54 mm (5.9-9.54), a superior angulation of 27.54° (range 20. 65°-33.95°), and a medial angulation of 38.95° (range 28.07°-52.85°). C2 Pars interarticularis had a mean width of 7.72 mm (range 5.93-10.61 mm), a height of 4.47 mm (range 2.33-6.3 mm), a superior angulation of 49.85° (range 41.89°-58.65°), and a medial angulation of 6.76° (range 1.18°-13.5°). CONCLUSION: Because the mean height of pars interarticularis is 4.47 mm, atlantoaxial arthrodesis should not use 4.5-mm-diameter screw, especially transarticular screws, due to the possibility of vascular and nerve damage.

Asunto(s)

RESUMEN

BACKGROUND: Cervical involvement in spinal tuberculosis is rare; however delayed diagnosis and treatment may result in massive, irreversible neurological deterioration. The purpose of this study is to report on a strategy for clinical diagnosis and management of cervical spinal tuberculosis. MATERIAL AND METHOD: Eighteen patients (13 males and 5 females) during 1998-2013 were retrospectively reviewed at Chiang Mai University Hospital. The patients had a mean age of 51.4 years (range 37-68 years). History, examination, radiographs, MRI and tissue sampling were used in diagnosis. Most of the patients were given antituberculous therapy (ATT) and underwent surgical management. The mean follow-up period was 12.8 months. RESULTS: Axial neckpain, quadriparesis, spastic gait and hand clumsiness were the predominant symptoms. Disc narrowing, endplate destruction andparaspinal soft tissue swelling were the prominent radiographic findings. MRI found Gadolinium enhancement of prevertebral soft tissue, T2 hypersignal of the intervertebral discs, intraosseous T2 hypersignal at the vertebral body, and disc fragmentation. Thirteen patients underwent single-stage anterior debridement with fusion. Three patients underwent posterior fusion alone. Axial neck pain improved in all patients. Nurick's disability index and fusion rate improved in 70% of the patients after conservative and surgical treatment. CONCLUSION: Cervical spinal tuberculosis should be suspected in endemic patients with severe neck pain and progressive neurological deficit. Histopathology is the gold standard of tuberculosis diagnosis. Anti-tuberculosis drugs should be continued for at least 12 months. Radical anterior debridement and instrumented fusion has demonstrated favorable results. The posterior approach is an alternative treatment in patients when the anterior approach cannot be performed or as part of second-stage surgery.

Asunto(s)

RESUMEN

BACKGROUND: Acute distractive-flexion injury of subaxial cervical spine (C3-C7) results in facet subluxation or dislocation. However, when the injury is missed or neglected, it may cause serious complications including axial pain, deformity and neurological deficit. OBJECTIVE: To demonstrate the pathoanatomy, presentation and management of these injuries. MATERIAL AND METHOD: The present study was conducted retrospectively at Chiang Mai University Hospital during 2008-2011. Ten patients were classified as to whether 2 unilateral/2 bilateral subluxation or 1 unilateral/5 bilateral dislocation. Pain, neurological status, imaging and bony fusion were recorded. RESULTS: The average timing before achieving treatment was 52 days. Five patients had arm pain and radiculopathy; the other 5 had myelopathy. Nine of 10 patients had posterior element fractures. No disc herniation was found. Pain and neurological status were improved after surgical decompression, realignment, stabilization and fusion. Bony fusions were achieved in all follow-up patients. CONCLUSION: Most patients have posterior element fractures without any evidence of intervertebral disc herniation. Spinal malalignment is the main cause of neurological impairment. Posterior-anterior approach is the favorable approach for old dislocation. Anterior approach is preferred for subluxation.

Asunto(s)

RESUMEN

BACKGROUND: Understanding of the pedicle anatomy is necessary for pedicle screw placement; however, there have been few Thai studies reporting on thoracic pedicle morphometry. OBJECTIVE: To determine important anatomical measurements for thoracic pedicle screw fixation. MATERIAL AND METHOD: T1-T12 vertebral pedicles were evaluated in 27 cadavers. The diameter angle, length and entry point of the pedicle were measured. RESULTS: The transverse diameter was smaller than the sagittal diameter at all levels. The narrowest transverse diameter was at the T5 level in males and T4 level in females. The pedicle diameter in males was statistically significantly greater than in females at all levels except at the T12 level. Most pedicles with a transverse diameter of 5.0 mm or less were found at the T4, T5, T6 and T7 levels. The transverse angle was widest at the T1 level; it faced medially at all levels. The sagittal angle was widest at the T12 level andfaced cephaladly at all levels. The axis length was shortest at the T1 level. Most entry points were at the inferolateral zone. CONCLUSION: A 4-mm diameter screw should be used carefully at the mid-thoracic levels for Thai people, especially females. Screw lengths of less than 30 mm are safe for placement at all levels. The safe zone for the pedicle entry point is in the inferolateral zone.

Asunto(s)

RESUMEN

STUDY DESIGN: Retrospective review of prospectively collected data. OBJECTIVE: To identify the cause of failed open-door laminoplasty and to describe the surgical strategies for revision surgery. SUMMARY OF BACKGROUND DATA: Although laminoplasty has become popular, few articles have addressed the cause of failed cervical laminoplasty requiring revision surgery. METHODS: All patients who required revision surgery following open-door cervical laminoplasty were identified. Clinical data, method of surgical revision, time between surgeries, Nurick grade, radiologic parameters, and complications were analyzed. Laminoplasty failures were classified into 3 categories: "technique related," "inadequate symptomatic relief after treatment," or "recurrence of symptoms due to disease progression." RESULTS: A total of 130 patients underwent cervical laminoplasty over a 10-year period (1996-2006), and 12 patients (9.2%) required revision surgery. The mean age was 50.7 years at the time of the index laminoplasty (range, 34-67 years) and 51.8 years (range, 35-70 years) at the time of the revision surgery. Mean duration of symptoms was 7.3 months before the index procedure (range, 2-17 months) and 5.6 months (range, 1-14 months) before revision surgery. The mean time interval between the index procedure and revision surgery was 16.6 months (range, 4-43 months). Of the 12 patients who required revision surgery, 5 had global lordosis of <10 degrees, 4 developed local kyphosis >13 degrees, and 5 had increased degenerative spondylolisthesis. Nonmyelopathic causes resulted in 50% of the revision surgery. Of 12 patients, 3 (25%) required revision surgery due to technique-related factors; 1 (8%) required surgery due to inadequate symptomatic relief after treatment; and 8 (67%) required revision surgery due to disease progression. CONCLUSION: Of the 130 patients who underwent cervical laminoplasty over a 10-year period, 12 patients (9.2%) required revision surgery. Although laminoplasty is generally successful, failures due to disease progression, technique-related factors, and inadequate symptomatic relief after treatment can occur. Patients should, therefore, be counseled regarding the potential need for revision surgery when undergoing open-door laminoplasty.

Asunto(s)