RESUMEN

In this study, the kinetic degradation of several typical organic pollutants was performed on a synthetic electrode (Ti/SnO2-Sb/Co-ßPbO2). The surface structure and the electrochemical properties of the prepared electrode were investigated, confirming the successful preparation of the electrode using an electrochemical deposition method. The outer layer (Co-ßPbO2) played an important role in reducing the resistance of the electrode and improving its degradation efficiency. The results showed that indigo carmine (IC), p-nitrosodimethylaniline (RNO), and clothianidin (CLO) were effectively degraded within 20 min of electrolysis. Their degradation in the electrochemical process followed the first-order kinetic model with the degradation rate constant of IC being higher than that of RNO and CLO. This was proved by the difference in the reactivity of the target pollutants toward oxidizing radicals (i.e., •OH, SO4•-, and Cl•). Their second-order rate constant towards radicals were in the range of 109 - 1010 M-1 s-1 with the highest value being that for IC: k·OH,IC = 15.1 × 109 M-1 s-1 and [Formula: see text]  = 7.4 × 109 M-1 s-1. The study calculated the contribution of some oxidizing species, including direct electron transfer (DET), •OH, SO4•-, and other reactive oxygen species (ROS). Solution pH, supporting electrolyte, and water matrix affected the degradation efficiency of pollutants and the contribution of the oxidizing species. Br- and I- ions enhanced the degradation rate of organic pollutants, while Fe2+, HCO3-, and humic acid (HA) reduced it. In addition, the toxicity, total organic carbon (TOC) removal, mineralization current efficiency (MCE), energy consumption, recyclability and stability of the prepared electrode were studied, suggesting that the prepared Ti/SnO2-Sb/Co-ßPbO2 is a good candidate for treating organic pollutants using the electrochemical oxidation process.

Asunto(s)

Contaminantes Químicos del Agua , Agua , Carmin de Índigo , Titanio/química , Electrodos , Contaminantes Químicos del Agua/química , Oxidación-Reducción

RESUMEN

Different types of advanced oxidation processes and their combinations such as O3/H2O2/UV, O3/Fenton/UV, O3/TiO2/UV, Fenton/H2O2/UV, Fenton/TiO2/UV, TiO2/H2O2/UV, TiO2/H2O2/O3/UV, TiO2/O3/Fenton/UV, TiO2/H2O2/Fenton/UV and O3/H2O2/Fenton/UV were studied for the treatment of undiluted red wastewater from Z113 Factory. The treatment efficiency was evaluated by analyzing chemical oxygen demand (COD) reduction, % degradation of α-TNT, 2,4-DNT, 2,6-DNT, 2,4-DNT-3-SO3Na and 2,4-DNT-5-SO3Na. Among studied processes Fenton/TiO2/O3/UV was the most effective technology to treat red wastewater. It allows to reduce >99% of COD, α-TNT, 2,4-DNT, 2,6-DNT, 2,4-DNT-3-SO3Na and 2,4-DNT-5-SO3Na after 30 h of treatment with optimum operating conditions: rotation speed of 600 rpm, pH of 4 and temperature of 40 °C. According to the chromatograms obtained by gas chromatograph/mass spectrometer (GC/MS), intermediates of the decomposition of pollutants in red wastewater were identified. GC/MS, HPLC, UV-vis and Bacterial Toxicity test were used to assess effluent quality changes before and after treatment. By economic analysis, the studied process had the potential to apply in practice to treat real wastewater at the Z113 Factory.