RESUMEN
We explore an alternative approach to the design of robots that deviates from the common envisionment of having one unified agent. What if robots are depicted as an agentic ensemble where agency is distributed over different components? In the project presented here, we investigate the potential contributions of this approach to creating entertaining and joyful human-robot interaction (HRI), which also remains comprehensible to human observers. We built a service robot-which takes care of plants as a Plant-Watering Robot (PWR)-that appears as a small ship controlled by a robotic captain accompanied by kinetic elements. The goal of this narrative design, which utilizes a distributed agency approach, is to make the robot entertaining to watch and foster its acceptance. We discuss the robot's design rationale and present observations from an exploratory study in two contrastive settings, on a university campus and in a care home for people with dementia, using a qualitative video-based approach for analysis. Our observations indicate that such a design has potential regarding the attraction, acceptance, and joyfulness it can evoke. We discuss aspects of this design approach regarding the field of elderly care, limitations of our study, and identify potential fields of use and further scopes for studies.
RESUMEN
The interfacial Dzyaloshinskii-Moriya interaction (DMI) is important for chiral domain walls (DWs) and for stabilizing magnetic skyrmions. We study the effects of introducing increasing thicknesses of Ir, from zero to 2 nm, into a Pt/Co/Ta multilayer between the Co and Ta layers. There is a marked increase in magnetic moment, due to the suppression of the dead layer at the interface with Ta, but the perpendicular anisotropy is hardly affected. All samples show a universal scaling of the field-driven DW velocity across the creep and depinning regimes. Asymmetric bubble expansion shows that DWs in all of the samples have the left-handed Néel form. The value of in-plane magnetic field at which the creep velocity shows a minimum drops markedly on the introduction of Ir, as does the frequency shift of the Stokes and anti-Stokes peaks in Brillouin light scattering (BLS) measurements. Despite this qualitative similarity, there are quantitative differences in the DMI strength given by the two measurements, with BLS often returning higher values. Many features in bubble expansion velocity curves do not fit simple models commonly used, namely a lack of symmetry about the velocity minimum and no difference in velocities at high in-plane fields. These features are explained by the use of a new model in which the depinning field is allowed to vary with in-plane field in a way determined from micromagnetic simulations. This theory shows that the velocity minimum underestimates the DMI field, consistent with BLS giving higher values. Our results suggest that the DMI at an Ir/Co interface has the same sign as the DMI at a Pt/Co interface.
RESUMEN
BACKGROUND: The aim of this multicentre retrospective study was to compare reverse total shoulder arthroplasty clinical outcomes with glenospheres of different diameters, designs and materials. METHODS: Between 2003 and 2008, 133 patients were divided into three groups: 60 (45%) with 36-mm standard CoCrMo (group A), 21 (16%) with 36-mm eccentric cobalt-chromium-molybdenum (CoCrMo) (group B) and 52 (39%) with 44-mm cross-linked ultra-high molecular weight polyethylene (X-UHMWPE) (group C) glenospheres. Mean (SD) follow-up was 38.7 (17.4) months. Clinical evaluation included Constant score and range of motion. Radiographic analysis included radiolucent lines, instability, loosening and assessment of scapular notching. RESULTS: Mean Constant score significantly increased for all groups (Wilcoxon test, p < 0.001). Group C allowed a higher and stable increase in range of motion. After 12 months and 24 months, groups C and B showed less pain than group A (Mann-Whitney U-test, p < 0.05). Group C had significantly lower scapular notching than group B (Mann-Whitney U-test, p = 0.001) and A (Mann-Whitney U-test, p = 0.009) at 12 months, 24 months and 36 months. Groups A and C presented 5 (8.3%) and 4 (7.6%) early complications, respectively. CONCLUSIONS: The present study reported good results for all groups, although groups C and A presented better clinical outcomes, significantly lower notching and instability. A 44-mm X-UHMWPE glenosphere allowed a faster and more stable functional recovery, despite poorest pre-operative conditions. Additional long-term studies are needed to evaluate survivorship.
RESUMEN
For adherently growing cells, cultivation is limited by the provided growth surface. Excellent surface-to-volume ratios are found in highly porous matrices, which have to face the challenge of nutrient supply inside the matrices' caverns. Therefore, perfusion strategies are recommended which often have to deal with the need of developing an encompassing bioreactor periphery. We present a modular bioreactor system based on a porous ceramic matrix that enables the supply of cells with oxygen and nutrients by perfusion. The present version of the reactor system focuses on simple testing of various inoculation and operation modes. Moreover, it can be used to efficiently test different foam structures. Protocols are given to set-up the system together with handling procedures for long-time cultivation of a CHO cell line. Experimental results confirm vital growth of cells inside the matrices' caverns.
Asunto(s)
Óxido de Aluminio/química , Reactores Biológicos , Técnicas de Cultivo de Célula/instrumentación , Cerámica/química , Animales , Células CHO , Adhesión Celular , Técnicas de Cultivo de Célula/métodos , Proliferación Celular , Cricetinae , Cricetulus , Diseño de Equipo , Etidio/química , Fluoresceínas/química , Colorantes Fluorescentes/química , Glucosa , Lactosa , Microscopía Electrónica de Rastreo , PorosidadRESUMEN
Assembly and disassembly of viral capsids are essential steps in the viral life cycle. Studies on their kinetics are mostly performed in vitro, allowing application of biochemical, biophysical and visualizing techniques. In vivo kinetics are poorly understood and the transferability of the in vitro models to the cellular environment remains speculative. We analyzed capsid disassembly of the hepatitis B virus in digitonin-permeabilized cells which support nuclear capsid entry and subsequent genome release. Using gradient centrifugation, size exclusion chromatography and immune fluorescence microscopy of digitonin-permeabilized cells, we showed that capsids open and close reversibly. In the absence of RNA, capsid re-assembly slows down; the capsids remain disintegrated and enter the nucleus as protein dimers or irregular polymers. Upon the presence of cellular RNA, capsids re-assemble in the nucleus. We conclude that reversible genome release from hepatitis B virus capsids is a unique strategy different from that of other viruses, which employs irreversible capsid destruction for genome release. The results allowed us to propose a model of HBV genome release in which the unique environment of the nuclear pore favors HBV capsid disassembly reaction, while both cytoplasm and nucleus favor capsid assembly.