RESUMEN
AIM: To evaluate antibiofilm activity against Enterococcus faecalis, pH and solubility of AH Plus, Sealer 26, Epiphany SE, Sealapex, Activ GP, MTA Fillapex (MTA-F) and an experimental MTA-based Sealer (MTA-S). METHODOLOGY: Sealer samples were manipulated and stored for 2 or 7 days. Prepared sealers were evaluated by a modified direct contact test (DCT) for 5 h, 10 h or 15 h with biofilm previously induced on bovine dentine for 14 days. In the control group, the biofilm was not exposed to the sealers. The number of colony-forming units (CFU mL(-1) ) in the remaining biofilm was determined. Sealer solubility was assessed by the percentage of mass loss after 15 h of immersion in distilled water. Sealer pH was measured at 5 h, 10 h and 15 h. Statistical analysis was performed using Kruskal-Wallis and Dunn or anova and Tamhane's T2 tests, at 5% significance. RESULTS: At 2 days post-manipulation, the DCT showed that Sealapex and MTA-F were associated with a reduction in the number of bacteria in all 3 contact periods evaluated, compared with the control group (P < 0.05). At 7 days, Sealapex had the greatest antibiofilm action at 10 h and 15 h. Sealapex had the highest pH values 2 and 7 days post-manipulation. Regarding the solubility, at 2 days the highest values were observed for MTA-F, MTA-S, Sealapex and Activ GP (P < 0.05). At 7 days, MTA-S and MTA-F had greater solubility than the other materials (P < 0.05). AH Plus had the lowest solubility for both post-manipulation periods (P < 0.05). CONCLUSION: Sealapex and MTA-F were associated with a reduction in the number of bacteria in biofilms and had greater solubility. The high solubility and pH may be related to the antibacterial activity of these materials.
Asunto(s)
Antibacterianos/farmacología , Materiales de Obturación del Conducto Radicular/farmacología , Resinas Acrílicas/química , Resinas Acrílicas/farmacología , Compuestos de Aluminio/química , Compuestos de Aluminio/farmacología , Animales , Carga Bacteriana/efectos de los fármacos , Biopelículas/efectos de los fármacos , Bismuto/química , Bismuto/farmacología , Compuestos de Calcio/química , Compuestos de Calcio/farmacología , Hidróxido de Calcio/química , Hidróxido de Calcio/farmacología , Bovinos , Dentina/microbiología , Combinación de Medicamentos , Enterococcus faecalis/efectos de los fármacos , Enterococcus faecalis/fisiología , Resinas Epoxi/química , Resinas Epoxi/farmacología , Concentración de Iones de Hidrógeno , Ensayo de Materiales , Óxidos/química , Óxidos/farmacología , Materiales de Obturación del Conducto Radicular/química , Salicilatos/química , Salicilatos/farmacología , Silicatos/química , Silicatos/farmacología , Solubilidad , Factores de Tiempo , Agua/químicaRESUMEN
AIM: To analyse the thermoplasticity of several endodontic filling materials using the Obtura II System at different temperature settings. METHODOLOGY: The following materials based on gutta-percha: Regular Obtura (OBT), Obtura Flow 150 (OBT F), Endo Flow (EDF), Odous (ODO) and the synthetic thermoplastic polymer material Resilon (RE) were heated using the Obtura II System at three temperature settings (140, 170 and 200 °C). Samples of the heated materials were placed on the sensor of a digital thermometer (THR-140; Instrutherm, São Paulo, Brazil) to determine their real temperature (RT) when the system was set at 140 °C (from 64.5 to 69 °C), 170 °C (from 73.8 to 77.5 °C) and 200 °C (from 83.6 °C for EDF and 100 °C for RE). Specimens (n = 30) were made by placing samples of each material in metallic ring moulds and compressing them between two glass slabs. After 24 h, specimens (n = 10) were heated at the different settings (RT) and submitted to compression under a 5-kg load. Plasticization was assessed by calculating the differences between the post-compression and initial diameters of each specimen. Data were submitted to anova and Tukey's test at 5% significance. RESULTS: At 140 °C, Obtura Flow presented the highest thermoplasticity values and Regular Obtura, the lowest. At 170 °C, Obtura Flow and Resilon demonstrated greater plasticization. Resilon had the highest mean thermoplasticity values at 200 °C. CONCLUSIONS: Thermoplasticity values were influenced both by the temperature settings on the Obtura II System and by the type of material analysed. Obtura Flow and Resilon had the highest mean thermoplasticity values.
Asunto(s)
Materiales de Obturación del Conducto Radicular , Obturación del Conducto Radicular/métodos , Análisis del Estrés Dental , Gutapercha/química , Calor , Ensayo de Materiales , Fenómenos Mecánicos , Materiales de Obturación del Conducto Radicular/química , ViscosidadRESUMEN
AIM: To assess the dimensional characteristics, flexibility and torsional behaviour of nickel-titanium retreatment instruments. METHODOLOGY: Using image analysis software and high-resolution digital images, the instrument length, tip angle, diameter at 3 mm from the tip and the distance between the blades (pitch length) of the following eight instruments were measured (n = 12 for each measurement parameter): the ProTaper Universal retreatment (PTU-R) D1, D2 and D3 instruments; the R-Endo R1, R2 and R3 retreatment instruments; and the Mtwo retreatment (Mtwo-R) sizes 25 and 15 retreatment instruments. Maximum torque and the angular deflection at fracture as well as the bending moment at 45° were measured (n = 12) according to the International Standards Organisation (ISO) specification number 3630-1. Data were analysed using the analysis of variance (α = 0.05). RESULTS: The length of the active part of the instruments was found to vary according to the depth of the canal into which they were designed to reach. The pitch length also increased along the active length. The PTU-R D1 and the Mtwo-R instruments had active tips. Measurements of the bending moment at 45° revealed that the Mtwo-R 15 instrument was the most flexible, whereas the PTU-R D1 was the least flexible. The maximum torque tended to increase as the instrument diameter at 3 mm from the tip increased, whereas the angular deflection at fracture varied in the opposite direction. CONCLUSIONS: The geometrical characteristics of the retreatment instruments and their flexibility and torsion behaviour were consistent with their intended clinical application.