RESUMEN
Self-injection locking of a diode laser to a high-quality-factor microresonator is widely used for frequency stabilization and linewidth narrowing. We constructed several microresonator-based laser sources with measured instantaneous linewidths of 1 Hz and used them for investigation and implementation of the self-injection locking effect. We studied analytically and experimentally the dependence of the stabilization coefficient on tunable parameters such as locking phase and coupling rate. It was shown that precise control of the locking phase allows fine-tuning of the generated frequency from the stabilized laser diode. We also showed that it is possible for such laser sources to realize fast continuous and linear frequency modulation by injection current tuning inside the self-injection locking regime. We conceptually demonstrate coherent frequency-modulated continuous wave LIDAR over a distance of 10 km using such a microresonator-stabilized laser diode in the frequency-chirping regime and measure velocities as low as sub-micrometer per second in the unmodulated case. These results could be of interest to cutting-edge technology applications such as space debris monitoring and long-range object classification, high-resolution spectroscopy, and others.
RESUMEN
The advantages of high-quality-factor (high-Q) whispering gallery mode (WGM) microresonators can be applied to develop novel photonic devices for the mid-infrared (mid-IR) range. ZBLAN (glass based on heavy metal fluorides) is one of the most promising materials to be used for this purpose due to low optical losses in the mid-IR. We developed an original, to the best of our knowledge, fabrication method based on melting of commercially available ZBLAN-based optical fiber to produce high-Q ZBLAN microspheres with the diameters of 250 to 350 µm. We effectively excited whispering gallery modes in these microspheres and demonstrated high quality factor both at 1.55 µm and 2.64 µm. Intrinsic quality factor at telecom wavelength was shown to be (5.4 ± 0.4) × 108 which is defined by the material losses in ZBLAN. In the mid-IR at 2.64 µm we demonstrated record quality factor in ZBLAN exceeding 108 which is comparable to the highest values of the Q-factor among all materials in the mid-IR.