RESUMEN

Two-dimensional (2D) nanomaterials are useful for building gas sensors owing to their desirable electronic and optical properties. However, they usually suffer from selectivity, because they cannot discriminate between gas molecules. Functionalization with organic molecules can be used to tailor their surfaces to recognize a specific family of compounds. In this study, solid-state density functional theory (DFT) was used to elucidate the functionalization of MoS2 with substituted aromatic diazonium salts (R = -H, - CH3, -CO2H, -CHO, -OCH3, and -NO2). Results showed that chemical reaction with diazonium salts is favored to their physical adsorption (E ads = -0.04 to -0.38 eV vs E rxn = -1.47 to -2.20 eV), where organic cations have a preference to attach atop of sulfur atoms. Chemical functionalization induced a small variation in the bandgap energy not exceeding 0.04 eV; thus, the optical properties were well preserved. In the presence of ammonia, the substituted MoS 2 /2(a-f) responded to the target analyte through a change in the interaction energy, varying from -0.08 to -0.83 eV, where the best interaction energy was obtained for MoS 2 /2c, bearing the carboxylic acid group. In the presence of other gases such as CO2, SO2, and H2S, the interaction energy is lower (-0.14 to -0.35 eV), indicating good selectivity of the nanomaterials. Furthermore, the interaction increased in the presence of humidity, which was more realistic than that in the presence of neat NH3. This interaction was confirmed by computing the partial charges. Recovery times estimated from the interaction energies ranged from 0.31 s to several minutes, depending on the interacting molecules. Phenylcarboxyl-modified MoS2 nanosheets show great potential as candidates for the development of chemoresistive gas sensors that are specifically designed for detecting ammonia.

RESUMEN

Cytochrome c552 from Thermus thermophilus is one of the hot topics for creating smart biomaterials as it possesses remarkable stability, is tolerant to multiple mutations and has therefore been recently reported for a number of functionalizations upon substitution of the original prosthetic group with an artificial prosthetic group. However, all of the substitutions were driven by the coordination through the axial ligands followed by complete reconstitution with a metal-porphyrin complex. This limits the scope of the cytochrome c for incorporating a metal-less non-natural heme species that could improve the versatility of cytochrome c for a new generation of engineered cytochrome proteins for further enhancement in their functionalities such as biocatalysts. In this connection, a new variant of Cytochrome c (rC552 C14A) from Thermus thermophilus was reported, where an easy approach to remove the original prosthetic group was achieved, followed by the incorporation of a number of metal-PPIX derivatives that ultimately led to the formation of artificial c-type cytochromes through covalent bonding. The apo-cytochrome was found to be thermally tolerant and to possess a distinctive overall structure as that of the wild type, as was evident from the corresponding CD spectra, which ultimately encouraged reconstitution with a metal-less protoporphyrin derivative for better understanding the role of axial ligands in the reconstitution process. Successful reconstitution was achieved, resulting in a new type of Cytochrome b-type artificial protein without the metal in its active site, indicating the non-involvement of the axial ligand. In order to prove the non-involvement of the axial ligand, a subsequent double mutant (C14A/M69A) was constructed, replacing the methionine at 69 position with non-coordinating alanine residue. Accordingly, the apo-C14A/M69A was prepared and found to be extremely stable as the earlier mutants and the WT showed no signs of denaturation, even at the elevated temperature of 98°C. Subsequently, heme b was successfully incorporated into the apo-C14A/M69A, which demonstrated itself as a highly thermally tolerant protein scaffold for incorporating a metal-less artificial prosthetic group in the absence of the axial ligand. Further improvement in the reconstitution process is achieved by replacing the methionine at 69 position with phenyl alanine (C14A/M69F mutant), resulting in further stabilization of heme species, possibly through non-covalent π-interactions, as corroborated by molecular docking.

Asunto(s)

RESUMEN

An ultrasensitive capacitance-based biosensor has been developed capable of detecting the kanamycin (KAN) antibiotic at sub-femtomolar levels. The biosensor was constructed using a potential-pulse-assisted method, allowing for the layer-by-layer deposition of a melanin-like polymeric film (MLPF) on an electrode surface modified with gold nanoparticles (AuNPs). The MLPF was formed through the electrochemical polymerization of dopamine and the specific kanamycin aptamer. By optimizing the operating parameters, we achieved a label-free detection of kanamycin by monitoring the variation of pseudocapacitive properties of the MLPF-modified electrode using electrochemical impedance spectroscopy. The developed biosensor demonstrated a wide linear response ranging from 1 fM to 100 pM, with a remarkable limit of detection of 0.3 fM (S/N = 3) for kanamycin. Furthermore, the biosensor was successfully applied to detect kanamycin in milk samples, exhibiting good recovery. These findings highlight the promising potential of the aptasensor for determination of antibiotic residues and ensuring food safety. In conclusion, our ultrasensitive capacitance-based biosensor provides a reliable and efficient method for detecting trace amounts of kanamycin in dairy products. This technology can contribute to safeguarding consumer health and maintaining high food safety standards.

Asunto(s)

RESUMEN

Regulatory bodies play a crucial role in establishing limits for food additives to ensure food quality and safety of food products, as excessive usage poses risks to consumers. In the context of processed animal-based foodstuffs, nitrite is commonly utilized as a means to slow down bacterial degradation. In this study, we have successfully leveraged the redox activity of an electrochemically deposited polydopamine (pDA) film onto gold nanoparticle (AuNP)-modified screen-printed electrodes (SPCE) to develop a sensitive and versatile methodology for the detection of nitrite using redox capacitance spectroscopy. By exploiting the interaction of the AuNPs/pDA electroactive interface with the target nitrite ions, we observed distinct changes in the redox distribution, subsequently leading to modifications in the associated redox capacitance. This alteration enables the successful detection of nitrite, exhibiting a linear response within the concentration range of 10 to 500 µM, with a limit of detection of 1.98 µM (S/N = 3). Furthermore, we applied the developed sensor to analyze nitrite levels in processed meats, yielding good recoveries. These results demonstrate the potential of our approach as a promising method for routine detection of ions.

RESUMEN

In silico evaluation of aptamer/target interactions can facilitate the development of efficient biosensor with high specificity and affinity. In this work, we present in silico, i.e. structural similarity, molecular docking and molecular dynamics selection of the aptamer with sufficient binding properties for acetamiprid (ACE), a nicotine-like pesticide, and its use to design aptamer-modified magnetic beads bearing ferrocene co-immobilized label for capacitive detection of ACE. Taking advantages of the aptamer higher stability and binding affinity, the specific properties of magnetic beads and the redox properties of ferrocene moiety, the developed aptasensor showed promising analytical performances for ACE detection, using electrochemical capacitance spectroscopy, with a linear response ranging from 1 fM to 100 pM and a limit of detection of 0.94 fM (S/N = 3). Furthermore, it was successfully applied to detect ACE in fortified tomatoes samples, proving a promising approach for routine detection of pesticide in real agricultural samples.

Asunto(s)

RESUMEN

Nitrate is a water-soluble toxic pollutant that needs to be excluded from the environment. For this purpose, several electrochemical studies have been conducted but most of them focused on the nitrate reduction reaction (NRR) in alkaline and acidic media while insignificant research is available in neutral media with Pt electrode. In this work, we explored the effect of three coinage metals (Cu, Ag, and Au) on Pt electrode for the electrochemical reduction of nitrate in neutral solution. Among the three electrodes, Pt-Cu exhibited the best catalytic activity toward NRR, whereas Pt-Au electrode did not show any reactivity. An activity order of Pt-Cu > Pt-Ag > Pt-Au was observed pertaining to NRR. The Pt-Ag electrode produces nitrite ions by reducing nitrate ions ([Formula: see text]. Meanwhile, at Pt-Cu electrode, nitrate reduction yields ammonia via both direct ([Formula: see text] and indirect ([Formula: see text] reaction pathways depending on the potential. The cathodic transfer coefficients were estimated to be ca. 0.40 and ca. 0.52, while the standard rate constants for nitrate reduction were calculated as ca. 2.544 × 10-2 cm.s-1 and ca. 1.453 × 10-2 cm.s-1 for Pt-Cu and Pt-Ag electrodes, respectively. Importantly, Pt-Cu and Pt-Ag electrodes execute NRR in the neutral medium between their respective Hydrogen-Evolution Reaction (HER) and Open-Circuit Potential (OCP), implying that on these electrodes, HER and NRR do not compete and the latter is a corrosion-free process.

Asunto(s)

RESUMEN

A cytochrome c552 mutant from Thermus thermophilus HB8 (rC552 C14A) was reported, where the polypeptide with replaced Cys14 by alanine, overexpressed in the cytosol of E. coli. The apo-form of the C14A mutant (apo-C14A) without the original prosthetic group was obtained by simple chemical treatments that retained compact conformation amenable to reconstitution with heme b and zinc(II)-protoporphyrin(IX), gradually followed by spontaneous formation of a covalent bond between the polypeptide and porphyrin ring in the reconstituted apo-C14A. Further analysis suggested that the residual Cys11 and vinyl group of the porphyrin ring linked through the thiol-ene reaction promoted by light under ambient conditions. In this study, we describe the kinetic improvement of the covalent bond formation in accordance with the mechanism of the photoinduced thiol-ene reaction, which involves a thiyl radical as a reaction intermediate. Adding a radical generator to the reconstituted C14A mutant with either heme-b or zinc(II) porphyrin accelerated the bond-forming reaction, which supported the involvement of a radical species in the reaction. Partial observation of the reconstituted C14A in a dimer form and detection of sulfuryl radical by EPR spectroscopy indicated a thiyl radical on Cys11, a unique cysteinyl residue in rC552 C14A. The covalent bond forming mediated by the radical generator was also adaptable to the reconstituted apo-C14A with manganese(II)-protoporphyrin(IX), which also exhibits light-mediated covalent linkage formation. Therefore, the radical generator extends the versatility of producing c-type-like cytochrome starting from a metallo-protoporphyrin(IX) and the apo-C14A instantaneously.

Asunto(s)

RESUMEN

The present study investigated iron molybdate (Fe2(MoO4)3), synthesized via a simple method, as a nanosorbent for methylene blue (MB) dye removal from aqueous solutions. Investigations of the effects of several parameters like contact time, adsorbent dose, initial dye concentration, temperature and pH were carried out. The results showed that MB removal was affected, significantly, by adsorbent dose and pH. Interestingly, lower values of adsorbent dose resulted in the removal of higher amounts of MB. At the optimum pH, the removal efficiency of 99% was gained with an initial MB concentration of ≤60 ppm. The kinetic study specified an excellent correlation of the experimental results with the pseudo-second-order kinetics model. Thermodynamic studies proved a spontaneous, favorable and endothermic removal. The maximum amount of removal capacity of MB dye was 6173 mg/g, which was determined from the Langmuir model. The removal efficiency was shown to be retained after three cycles of reuse, as proven by thermal regeneration tests. The presence and adsorption of the dye onto the Fe2(MoO4)3 nanoparticle surface, as well as the regeneration of the latter, was ascertained by scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy (FTIR). These findings are indicative that the investigated nanosorbent is an excellent candidate for the removal of MB in wastewater.

Asunto(s)

RESUMEN

In this work, we report on the design of an enzyme-less sensitive and selective electrochemical electrode for ascorbic acid (AA) detection using a modified screen-printed electrode of melanin-like nanoparticles (Mel-NPs). Cyclic voltammetry shows that the melanin-modified electrode exhibits high electrocatalytic activity for ascorbic acid. The melanin-like nanoparticles serve as a shuttle to transport electrons from ascorbic acid to the electrode surface. The modified electrode is endowed with a large dynamic window ranging from 5 to 500 ppb. The detection and quantification limits were estimated to be 0.07 and 0.23 ppb, respectively. The modified electrode was successfully used to determine AA in human blood serum, urine and saliva with satisfactory recovery levels.

RESUMEN

A highly selective and sensitive dopamine electrochemical sensor based on nitrogen-doped graphene quantum dots-chitosan nanocomposite-modified nanostructured screen printed carbon electrode is presented, for the first time. Graphene quantum dots were prepared via microwave-assisted hydrothermal reaction of glucose, and nitrogen doping was realized by introducing ammonia in the reaction mixture. Chitosan incorporation played a significant role towards the selectivity of the prepared sensor by hindering the ascorbic acid interference and enlarging the peak potential separation between dopamine and uric acid. The proposed sensor's performance was shown to be superior to several recently reported investigations. The as-prepared CS/N,GQDs@SPCE exhibited a high sensitivity (i.e. ca. 418 µA mM cm-2), a wide linear range i.e. (1-100 µM) and (100-200 µM) with excellent correlations (i.e. R2 = 0.999 and R2 = 1.000, respectively) and very low limit of detection (LOD = 0.145 µM) and limit of quantification (LOQ = 0.482 µM) based on S/N = 3 and 10, respectively. The applicability of the prepared sensor for real sample analysis was tested by the determination of dopamine in human urine in pH 7.0 PBS showing an approximately 100% recovery with RSD < 2% inferring both the practicability and reliability of CS/N,GQDs@SPCE. The proposed sensor is endowed with high reproducibility (i.e. RSD = ca. 3.61%), excellent repeatability (i.e. ca. 0.91% current change) and a long-term stability (i.e. ca. 94.5% retained activity).

RESUMEN

The demand for on-site nanodevices is constantly increasing. The technology development for the design of such devices is highly regarded. In this work, we report the design of a disposable platform that is structured with cauliflower-shaped gold nanoparticles (cfAuNPs) and we show its applications in immunosensing and enzyme-based detection. The electrochemical reduction of Au(III) allows for the electrodeposition of highly dispersed cauliflower-shaped gold nanoparticles on the surface of screen-printed carbon electrodes (SPCEs). The nanostructures were functionalized using ferrocenylmethyl lipoic acid ester which allowed for the tethering of the ferrocene group to gold, which serves as an electrochemical transducer/mediator. The bioconjugation of the surface with anti-human IgG antibody (α-hIgG) or horseradish peroxidase (HRP) enzyme yields biosensors, which have been applied for the selective electrochemical detection of human IgG (hIgG) or H2O2 as model analytes, respectively. Parameters such as the number of sweeps, amount of charge generated from the oxidation of the electrodeposited gold, time of incubation and concentration of the ferrocene derivatives have been studied using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and scanning electron microscopy (SEM). Selectivity and specificity tests have been also performed in the presence of potentially interfering substances to either hIgG or H2O2. Results showed that the devised immunosensor is endowed with good selectivity and specificity in the presence of several folds of competitive analytes. The enzyme-based platform showed a good catalytic activity towards H2O2 oxidation which predestined it to potential applications pertaining to enzymatic kinetics studies. The levels of hIgG in human serum and H2O2 in honey were successfully determined and served as assessment tools of the applicability of the platforms for real samples analysis.