RESUMEN

AIM: Evaluate the prevalence of mesiolingual canal prevalence orifice in mesiobuccal roots of maxillary first molars using five methods of visualization. MATERIALS AND METHODS: About 73 first permanent maxillary molars were analyzed. Visual clinical analysis of the presence of the fourth canal was performed using a straight end-odontic exploratory probe (EXDG16®) and a K10 manual file (SybronEndo®). Dental elements that were not located on the fourth canal were analyzed with the aid of a magnifying glass (Zeiss®) with a 2.5-fold increase and those teeth in which the fourth canal was not found went through the examination with clinical surgical microscope (OPTO®) with magnification of 20 times with both the explorer and endodontic file. Next, a periapical radiography of the teeth was performed in the teeth in which the mesiolingual canal was not yet found to observe the presence or absence of the fourth canal. Afterward, the teeth in which the canal was not yet located were scanned using the microtomography equipment (SkyScan®), at 100 kV and 100 µA, with an isotropic resolution of 16 µm. RESULTS: The mesiolingual canal was located in 70 teeth (95.8%) and in only 3 teeth it was not identified. CONCLUSION: The visual method in the fourth canal search has limitations, whereas the composite magnifying glass, the clinical surgical microscopy, and the computerized microtomography are efficient methods for locating the fourth canal in the upper first molars. CLINICAL SIGNIFICANCE: The anatomical complexity of the first maxillary molars is one of the factors that leads to high failure rates in the endodontic treatments of this group of teeth. In most clinical situations, the mesiolingual canal goes unnoticed by professionals, since conventional radiographs do not always allow the visualization of all root canals. Determining an effective method for locating the mesiolingual canal is of paramount importance to the success of endodontic treatment.

Asunto(s)

RESUMEN

This study determined the oxygen saturation (SaO2) in dental pulp of healthy maxillary and mandibular molars. Mean of SaO2 was evaluated in 112 maxillary and mandibular molars using pulse oximetry. Quantitative variables were described by mean and standard deviation. Variables with symmetric distribution were compared by Student t test and Mann-Whitney test. Pearson's correlation coefficient was used to correlate quantitative variables. Analysis of variance was used to assess differences in SaO2 levels between the molar groups, followed by post-hoc Tukey. The significance level established at p<0.05. Mean of oxygen saturation for the 112 molar dental pulps was 85.09%. There was no significant correlation (r=-0.007; p=0.977) between the mean of SaO2 of molar pulps with patient´s indicator finger (92.89%). There was a significant difference (p=0.037) between the mean of SaO2 of the first (85.76%) and second maxillary molars (81.87%), and it was not significant (p=0.1775) between the first and second mandibular molars. Maxillary molars had lower pulpal SaO2 (83.59%) than mandibular molars (86.89%) (p=0.018). The mean of the patient's response time to the cold stimulus was 1.12 s (maxillary molars 1.25 s and mandibular molars 0.99 s)(p=0.052). There was no significant correlation between the time response of the patient to the cold stimulus and the SaO2 for molars. The mean oxygen saturation level was 85.09%. The mandibular molars presented higher SaO2 level than maxillary molars.

Asunto(s)

RESUMEN

The aim of this study was to determine oxygen saturation levels in the dental pulp of maxillary premolars in different age groups. A total of 120 human maxillary premolars with normal dental pulps were selected covering the following age groups: 20-24, 25-29, 30-34, 35-39 and 40-44 years (n=24 each group). Oxygen saturation was assessed using pulse oximetry. Analysis of variance was used to assess differences in oxygen saturation levels and Tukey's test was used to identify the age groups that differed from each other. Significance was set at 0.05. Mean oxygen saturation of 120 premolars was 86.20% considering all age groups. Significantly reduced levels were found in the oldest group compared to the other groups: 40 to 44 years - 80.00% vs. 89.71, 87.67, 88.71, and 84.80% for age groups 20-24, 25-29, 30-34, 35-39 years, respectively. The mean oxygen saturation levels were similar between 20 and 39 years of age (86.20%) in the whole sample, but reduced significantly in the 40-44-year age group, suggesting that older patients present lower oxygen saturation results even in the absence of pulp tissue injury.

Asunto(s)

RESUMEN

Abstract This study determined the oxygen saturation (SaO2) in dental pulp of healthy maxillary and mandibular molars. Mean of SaO2 was evaluated in 112 maxillary and mandibular molars using pulse oximetry. Quantitative variables were described by mean and standard deviation. Variables with symmetric distribution were compared by Student t test and Mann-Whitney test. Pearson's correlation coefficient was used to correlate quantitative variables. Analysis of variance was used to assess differences in SaO2 levels between the molar groups, followed by post-hoc Tukey. The significance level established at p<0.05. Mean of oxygen saturation for the 112 molar dental pulps was 85.09%. There was no significant correlation (r=-0.007; p=0.977) between the mean of SaO2 of molar pulps with patient´s indicator finger (92.89%). There was a significant difference (p=0.037) between the mean of SaO2 of the first (85.76%) and second maxillary molars (81.87%), and it was not significant (p=0.1775) between the first and second mandibular molars. Maxillary molars had lower pulpal SaO2 (83.59%) than mandibular molars (86.89%) (p=0.018). The mean of the patient's response time to the cold stimulus was 1.12 s (maxillary molars 1.25 s and mandibular molars 0.99 s)(p=0.052). There was no significant correlation between the time response of the patient to the cold stimulus and the SaO2 for molars. The mean oxygen saturation level was 85.09%. The mandibular molars presented higher SaO2 level than maxillary molars.

Resumo Este estudo determinou o nível de saturação de oxigênio (SaO2) em polpas dentais hígidas de molares. O nível de SaO2 foi avaliado em 112 molares superiores e inferiores usando oxímetro de pulso. As variáveis quantitativas foram descritas pela média e desvio padrão. As variáveis com distribuição simétrica foram comparadas pelo teste t de Student e teste de Mann-Whitney. O coeficiente de correlação de Pearson foi utilizado para correlacionar variáveis quantitativas. A análise de variância foi utilizada para avaliar as diferenças nos níveis de SaO2 entre os grupos de molares, seguido de Tukey pós-hoc. A significância foi estabelecida em 0,05. O nível médio de SaO2 para as polpas de 112 molares foi de 85,09%, não havendo correlação com a média de SaO2 do dedo indicador do paciente (92,89%). Houve diferença significativa entre o nível médio de SaO2 dos primeiros molares superiores (85,76%) e os segundos molares superiores (81,87%) e não foi significativo entre os primeiros e os segundos molares inferiores. Os molares superiores apresentaram menor nível de SaO2 (83,59%) do que os molares inferiores (86,89%). A média do tempo de resposta do paciente ao estímulo com frio foi de 1,12 s (molares superiores 1,25 segundos e molares inferiores 0,99 segundos). Não houve correlação significativa entre o tempo de resposta do paciente ao estímulo com frio e o nível de saturação de oxigênio para os molares. Em resumo, o nível médio de saturação de oxigênio foi de 85,09%. Os molares inferiores apresentaram maior nível de SaO2 do que os molares superiors

Asunto(s)

RESUMEN

Abstract The aim of this study was to determine oxygen saturation levels in the dental pulp of maxillary premolars in different age groups. A total of 120 human maxillary premolars with normal dental pulps were selected covering the following age groups: 20-24, 25-29, 30-34, 35-39 and 40-44 years (n=24 each group). Oxygen saturation was assessed using pulse oximetry. Analysis of variance was used to assess differences in oxygen saturation levels and Tukey's test was used to identify the age groups that differed from each other. Significance was set at 0.05. Mean oxygen saturation of 120 premolars was 86.20% considering all age groups. Significantly reduced levels were found in the oldest group compared to the other groups: 40 to 44 years - 80.00% vs. 89.71, 87.67, 88.71, and 84.80% for age groups 20-24, 25-29, 30-34, 35-39 years, respectively. The mean oxygen saturation levels were similar between 20 and 39 years of age (86.20%) in the whole sample, but reduced significantly in the 40-44-year age group, suggesting that older patients present lower oxygen saturation results even in the absence of pulp tissue injury.

Resumo Este estudo determinou os níveis de saturação de oxigênio (SaO2) em polpas dentárias de pré-molares superiores em diferentes faixas etárias. Foram selecionados 120 pré-molares superiores humanos com polpas dentárias normais, abrangendo os seguintes grupos etários: 20-24, 25-29, 30-34, 35-39 e 40-44 anos (n=24 para cada grupo). A saturação de oxigênio foi avaliada utilizando oximetria de pulso. A análise de variância foi utilizada para avaliar diferenças nos níveis de saturação de oxigênio, e o teste de Tukey foi utilizado para identificar os grupos etários que diferiam uns dos outros. A significância foi estabelecida em 0,05. A saturação média de oxigênio foi de 86,20% considerando todos os grupos etários. Níveis significativamente reduzidos foram encontrados no grupo de indivíduos de maior idade em comparação aos outros grupos: 40 a 44 anos - 80,00% vs. 89,71, 87,67, 88,71 e 84,80% para os grupos etários 20-24, 25-29, 30-34, 35-39 anos. Os níveis médios de saturação de oxigênio foram semelhantes entre os 20 e os 39 anos de idade (86,20%), mas reduziram-se significativamente na faixa etária de 40-44 anos, sugerindo que os pacientes mais idosos apresentam menor saturação de oxigênio mesmo na ausência de lesão do tecido pulpar.

Asunto(s)

RESUMEN

AIM: To determine the presence of metallic microfragments and their elemental composition in the dentinal walls of root canals following preparation using different endodontic instruments and to assess the active cutting edges of instruments with regard to structural defects. MATERIALS AND METHODS: A total of 108 molar teeth were selected and prepared using different endodontic instruments. Teeth were randomly divided into nine groups of 12 teeth each, according to the instruments employed: Manual systems -K-FlexoFile, K-File, and Hedstroem; rotary systems - ProTaper Next, Mtwo, BioRaCe; and reciprocating systems - Reciproc, Unicone, and WaveOne. Both root canals and instruments were assessed using scanning electron microscopy, and the elemental composition of metallic microfragments was determined using energy-dispersive X-ray spectroscopy. RESULTS: Metallic microfragments were found in the groups prepared with both manual and reciprocating instruments, with no statistically significant differences between groups, thirds, or presence of metallic microfragments (p ≥ 0.05). Moreover, all groups presented structural defects in both new and used instruments; however, rotary instruments (ProTaper Next, Mtwo 702, BioRaCe) were the ones with the lowest number of defects, at statistically significant differences in comparison with other instruments (p < 0.05). CONCLUSION: The presence of metallic microfragments on dentinal walls following root canal preparation was associated with manual and reciprocating instrumentation. Furthermore, rotary instruments were the ones with the lowest number of defects. Considering the outcomes measured in this study, rotary instruments performed better than the other two groups, as they were associated with the lowest number of metallic microfragments and structural defects. CLINICAL SIGNIFICANCE: During root canal preparation, operative procedures may induce changes to the root canal shape, as well as the release of metallic fragments resulting from the action of instruments on dentinal walls. Therefore, it is important to determine, among the different techniques used for this purpose, which ones are least susceptible to this occurrence.

Asunto(s)

RESUMEN

INTRODUCTION: This study discusses a nonconventional therapeutic protocol for type III dens invaginatus. This condition is a disorder of dental development, caused by the invagination of enamel into coronal and/or radicular dentin structure. This promotes several structural alterations within the dental organ, which offers challenges and difficulties to perform the endodontic treatment when needed. This article reports a clinical case where a conservative approach was adopted to preserve the invagi-nated tooth, and endodontic treatment was performed in the main necrotic canal. Following 21 years of observation, a complete root formation could be seen, with dental pulp preservation of the pulpotomized tooth. Considering the reported difficulties for the treatment of dens invaginatus, conservative measures, such as pulpotomy to preserve the remaining dental pulp may be an excellent alternative to allow less invasive procedures, thus avoiding endodontic surgery. This study discusses a nonconventional therapeutic protocol for type III dens invaginatus. A conservative approach adopted preserved the invaginated tooth, and root canal treatment was performed in the main necrotic canal. Following 21 years of observation, there was complete root formation, with dental pulp preservation of the pulpotomized tooth.

Asunto(s)

RESUMEN

O preparo do canal radicular constitui-se em uma fase importante do tratamento endodôntico, por possibilitar a limpeza e a desinfecção do sistema de canais, além da modelagem, que permite a adequada acomodação do material obturador e o selamento endodôntico. Com o advento dos instrumentos de níquel-titânio, de reconhecida flexibilidade, tem-se observado considerável facilidade na realização do preparo e menor índice de desvio apical em canais curvos. Sendo assim, o objetivo deste estudo foi avaliar o desgaste produzido nas paredes dos canais mésio-vestibulares de primeiros molares inferiores pelos sistemas ProTaper®, BioRaCe® e instrumentos manuais, nos terços cervical, médio e apical. Para tal, foram utilizados trinta e nove primeiros molares inferiores, divididos em três grupos. Cada dente foi inicialmente radiografado nos sentidos vestíbulo-lingual e proximal, por meio de raio x digital. Após o preparo dos canais mésio-vestibulares, os dentes foram novamente radiografados. Por meio do programa Adobe Photoshop®, as radiografias iniciais e finais de ambas as incidências foram digitalmente sobrepostas e, através da subtração das imagens, o desgaste foi evidenciando nas três dimensões. Foram atribuídos escores relativos à quantidade de desgaste gerado nos terços cervical, médio e apical do canal radicular. Os resultados mostraram diferença estatisticamente significativa apenas no terço apical, onde os instrumentos ProTaper® produziram um desgaste significativamente menor do que os instrumentos manuais. Para os instrumentos BioRa-Ce® não foram encontradas diferenças significativas. Também foi possível observar que os sistemas ProTaper® e BioRaCe® deixaram áreas do canal radicular não instrumentadas principalmente no terço apical, seguido pelo terço médio.

The root canal preparation has been considered one of the most important phases of the endodontic treatment because it allows cleaning and disinfection of the canal system and its modeling, it also allows the proper accommodation of the filling material and endodontic sealing. With the advent of nickel-titanium instruments, which are known for their flexibility, there has been reasonably improvement in the quality of the preparation. In that way, goal of this paper is to evaluate the wear produced in the walls of mesiobuccal canals of first mandibular molars by ProTaper® system, BioRaCe® and hand instruments at the cervical, middle and apical thirds. Thirty-nine mandibular first molars divided into three groups were used. Each tooth was initially x-rayed in buccolingual and proximal direction through a digital x-ray. After preparation of mesiobuccal canals, they were x-rayed again. Through Adobe Photoshop software, the initial and final x-rays of both incidences were digitally superimposed and by subtraction of the images, canal wear was shown in three dimensions. Scores were given to the root canal related to the amount of wear generated in the cervical, middle and apical thirds of root canal. The results showed statistically significant differences only in the apical third, where Pro-Taper® instruments produced a significantly lower wear than the hand instruments. For BioRaCe® instruments, no significant differences were found. It was also possible to observe that ProTaper® BioRaCe® systems left non-instrumented areas in the root canal, mainly in the apical third, followed by the middle third.

RESUMEN

To determine the frequency of apical and cervical curvatures in human molars using the radius method and cone-beam computed tomography (CBCT) images. Four hundred images of mandibular and maxillary first and second molars were selected from a database of CBCT exams. The radius of curvature of curved root canals was measured using a circumcenter based on three mathematical points. Radii were classified according to the following scores: 0 - straight line; 1 - large radius (r > 8 mm, mild curvature); 2 - intermediate radius (r > 4 and r < 8 mm, moderate curvature); and 3 - small radius (r ≤ 4 mm, severe curvature). The frequency of curved root canals was analyzed according to root canal, root thirds, and coronal and sagittal planes, and assessed using the chi-square test (significance at α = 0.05). Of the 1,200 evaluated root canals, 92.75% presented curved root canals in the apical third and 73.25% in the cervical third on coronal plane images; sagittal plane analysis yielded 89.75% of curved canals in the apical third and 77% in the cervical third. Root canals with a large radius were significantly more frequent when compared with the other categories, regardless of root third or plane. Most root canals of maxillary and mandibular first and second molars showed some degree of curvature in the apical and cervical thirds, regardless of the analyzed plane (coronal or sagittal).

Asunto(s)

RESUMEN

To determine the frequency of apical and cervical curvatures in human molars using the radius method and cone-beam computed tomography (CBCT) images. Four hundred images of mandibular and maxillary first and second molars were selected from a database of CBCT exams. The radius of curvature of curved root canals was measured using a circumcenter based on three mathematical points. Radii were classified according to the following scores: 0 - straight line; 1 - large radius (r>8 mm, mild curvature); 2 - intermediate radius (r>4 and r<8 mm, moderate curvature); and 3 - small radius (r≤4 mm, severe curvature). The frequency of curved root canals was analyzed according to root canal, root thirds, and coronal and sagittal planes, and assessed using the chi-square test (significance at α=0.05). Of the 1,200 evaluated root canals, 92.75% presented curved root canals in the apical third and 73.25% in the cervical third on coronal plane images; sagittal plane analysis yielded 89.75% of curved canals in the apical third and 77% in the cervical third. Root canals with a large radius were significantly more frequent when compared with the other categories, regardless of root third or plane. Most root canals of maxillary and mandibular first and second molars showed some degree of curvature in the apical and cervical thirds, regardless of the analyzed plane (coronal or sagittal).

Determinar a frequência de curvaturas apicais e cervicais em molares humanos usando o método do raio de curvatura e imagens de Tomografia Computadorizada de Feixe Cônico (TCFC). Quatrocentas imagens de primeiros e segundos molares superiores e inferiores foram selecionadas a partir de um banco de dados de exames de TCFC. O raio de curvatura dos canais foi medido usando um circuncentro com base em três pontos matemáticos e classificado de acordo com os seguintes escores: 0 - linha reta; 1 - raio grande (r > 8 mm, curvatura suave); 2 - raio intermediário (r > 4 e r < 8, curvatura moderada); 3 - raio pequeno (r ≤ 4 mm, curvatura severa). A frequência de curvaturas foi analisada em função do canal radicular, dos terços da raiz, e dos planos de avaliação (coronal e sagital); e avaliados usando o teste Qui-Quadrado (significância de α=0.05). Dos 1200 canais radiculares avaliados, 92,75% apresentaram curvatura no terço apical e 73,25% no terço cervical quando da análise no plano coronal; a análise do plano sagital revelou 89,75% de canais curvos no terço apical e 77% no terço cervical. Canais radiculares com curvatura suave foram significantemente mais frequentes quando comparados com as demais categorias, independentemente do terço radicular ou do plano. A maioria dos canais radiculares dos primeiros e segundos molares superiores e inferiores apresentou algum grau de curvatura nos terços apical e cervical, independentemente do plano analisado (coronal ou sagital).

Asunto(s)