RESUMEN

Functionalized calcium carbonate (FCC), a novel pharmaceutical excipient, has shown promising properties in the field of oral drug delivery. The current study aimed at evaluating the feasibility of FCC as a carrier for the solidification of self-nanoemulsifying drug delivery systems (SNEDDS) containing the poorly water-soluble model drug carvedilol (CRV). Conventional, subsaturated SNEDDS (80 %-SNEDDSliquid) and supersaturated SNEDDS (200 %-SNEDDSliquid) were loaded onto FCC via physical adsorption at three ratios; 2.5:1, 3.0:1 and 3.5:1 (w/w) of FCC:SNEDDSliquid, respectively, generating free-flowing powders (SNEDDSFCC) with drug loading ranging from 0.8 % to 2.6 % (w/w) CRV. The emulsification of SNEDDSFCC in a USP II dissolution setup (in purified water) was characterized using dynamic light scattering, resulting in similar droplet sizes and PDIs as observed for their liquid counterparts. The morphology and physical state of the obtained SNEDDSFCC were characterized using scanning electron microscopy and differential scanning calorimetry. The physical stability and drug release upon dispersion were assessed as a function of storage time. The 200 %-SNEDDSliquid were physically stable for 6 days, however, solidification using FCC stabilized the supersaturated concentrations of CRV for a test period of up to 10 weeks (solidification ratios 3.0:1 and 3.5:1 (FCC:SNEDDSliquid)). SNEDDSFCC achieved an improved rate and extent of drug release upon dispersion compared to the crystalline CRV in tap water (pH 7.5), however, to a lesser extent than their liquid counterparts. After 8 weeks of storage (25 °C at dry conditions), FCC was still able to rapidly release the SNEDDSliquid and demonstrated the same rate and extent of drug release as freshly prepared samples. The solidification of 200 %-SNEDDSliquid in presence of FCC greatly improved the drug loading and showed an enhanced drug release profile compared to the conventional systems. In conclusion, FCC showed potential as a carrier for solidification of SNEDDS and for the development of novel supersaturated solid SNEDDS for the oral delivery of poorly water-soluble drugs.

Asunto(s)

RESUMEN

In this study, surface diffusion of l-aspartic acid-carvedilol (ASP-CAR) co-amorphous systems at different ASP concentrations is measured and correlated with their physical stability. ASP-CAR films at ASP concentrations of 1-5% (w/w) were prepared by a newly developed method based on a vacuum compression molding process. Surface diffusion measurements were conducted on these systems based on the surface grating decay method using atomic force microscopy (AFM). The results demonstrate that a small amount of ASP (i.e., ≤ 5% w/w) in the co-amorphous systems could significantly slow down the grating decay process compared with that of pure amorphous CAR, indicating a reduced surface diffusion of CAR molecules. The decay time gradually increased in co-amorphous systems with increasing ASP concentration from 1 to 5% (w/w), with the longest observed decay time of around 800 h for the 5%ASP-CAR system, which was more than 200 times longer compared to the decay time of pure amorphous CAR (approximately 3 h). A good correlation between the decay constants of the pure amorphous CAR and co-amorphous films at ASP concentrations of 1-5% (w/w) and the physical stability of corresponding amorphous powder samples was found. Overall, this study provides a new method to prepare co-amorphous films for surface property measurements and reveals the impact of surface diffusion on the physical stability of co-amorphous systems.

Asunto(s)

RESUMEN

The use of amorphous drug delivery systems is an attractive approach to improve the bioavailability of low molecular weight drug candidates that suffer from poor aqueous solubility. However, the pharmaceutical performance of many neat amorphous drugs is compromised by their tendency for recrystallization during storage and lumping upon dissolution, which may be improved by the application of coatings on amorphous surfaces. In this study, hot melt coating (HMC) as a solvent-free coating method was utilized to coat amorphous carvedilol (CRV) particles with tripalmitin containing 10% (w/w) and 20% (w/w) of polysorbate 65 (PS65) in a fluid bed coater. Lipid coated amorphous particles were assessed in terms of their physical stability during storage and their drug release during dynamic in vitro lipolysis. The release of CRV during in vitro lipolysis was shown to be mainly dependent on the PS65 concentration in the coating layer, with a PS65 concentration of 20% (w/w) resulting in an immediate release profile. The physical stability of the amorphous CRV core, however, was negatively affected by the lipid coating, resulting in the recrystallization of CRV at the interface between the crystalline lipid layer and the amorphous drug core. Our study demonstrated the feasibility of lipid spray coating of amorphous CRV as a strategy to modify the drug release from amorphous systems but at the same time highlights the importance of surface-mediated processes for the physical stability of the amorphous form.

RESUMEN

Quantifying molecular surface diffusivity is of broad interest in many different fields of science and technology. In this study, the method of surface grating decay is utilized to investigate the surface diffusion of practical relevant amorphous solid dispersions of indomethacin and the polymeric excipient Soluplus (a polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer) at various polymer concentrations (1-20% w/w). The study confirms that measuring surface diffusivity below the system's glass transition temperature is possible with a simplified atomic force microscopy setup. Results highlight a striking polymer influence on the surface diffusivity of drug molecules at low polymer concentrations and a turnover point to a polymer dominated diffusion at around three percent (w/w) polymer concentration. The surface diffusion measurements further correlate well with the observed increase in physical stability of the system as measured by X-ray powder diffraction. These findings are of vital interest in both the applied use and fundamental understanding of amorphous solid dispersions.

Asunto(s)