RESUMEN

Subsequent to dental extraction, residual ridge resorption manifests as an inherent biological process unfolding over an approximate duration of one year. This intrinsic phenomenon entails a substantial diminution, occasionally reaching 50%, in the initial bucco-lingual dimensions of the mandibular bone. To address this issue, a dental procedure known as the two-stage ridge split intervention is employed. This process involves two distinct stages: ridge splitting and extension. In the first stage, the dentist splits the alveolar crest to create a widening gap. This allows for the subsequent placement of dental implants. The splitting process is carefully executed to ensure that there's enough space for the implants to be securely embedded, and in the second stage, the widened gap generated through the split and extension of the alveolar crest is replenished with a suitable material. Two common options are hydroxyapatite, a synthetic bone-like substance that promotes bone regeneration, or autogenous bone grafts, which are harvested from the patient's bone, often from another site within the mouth. Following this two-stage procedure, the next step is to place dental implants. However, there's typically a waiting period of eight to 12 weeks. This interval allows for proper healing and integration of the grafted or filled material with the existing bone before the implants are installed. In this case report, a specific patient's experience with the two-stage ridge split procedure in the mandibular region is mentioned. Such case studies are valuable in assessing the success and viability of this dental intervention in narrow mandibular-width cases.

RESUMEN

Aims: The study aimed to evaluate biological, mechanical, and patient reported parameters associated with ASC abutments and MU abutments for the fabrication of screw retained implant crowns in the anterior esthetic zone. Setting and Design: For the study, 20 patients were selected and implants were placed within the constraints of prosthetic envelope. Later, the screw retained crown was fabricated. Materials and Methods: Biological parameters (including implant survival rate, marginal bone levels using cone beam computed tomography, and soft tissue assessment using periodontal indices) were measured at the time of crown placement and 1 year follow up. Mechanical parameter (screw loosening) was calculated using removal torque loss (RTL) values obtained at the time of crown placement and 1 year follow up. Patient reported parameters were evaluated using a questionnaire at 1 year follow up. Statistical Analysis Used: All data were tabulated, statistically analyzed, and compared using SPSS version 23 IBM Corporation, Armonk, NY, USA. Results: Implant survival was found 100% in both the groups. The marginal bone level reduced considerably in both the groups from baseline to 1 year follow up. The MU abutment group had slightly less marginal bone loss than the ASC abutment group. Additionally, there was no statistically significant difference between the two groups' periodontal indices at baseline and 1-year follow-up values. At baseline, the RTL value was substantially lower (P <0.003) in the ASC abutment group than in the MU abutment group, however at the 1-year follow-up, there was no statistically significant difference in RTL or screw loosening between the two groups. Patient-reported data showed no statistically significant difference. Conclusion: Within the constraints of this study, it was suggested that both ASC and MU abutments provide equally promising results in terms of biological, mechanical, and patient-reported parameters in the anterior esthetic region for single screw-retained crowns.

Asunto(s)

Implantes Dentales , Humanos , Pilares Dentales , Prótesis Dental de Soporte Implantado , Estética Dental , Tornillos Óseos , Medición de Resultados Informados por el Paciente

RESUMEN

Background To achieve a better long-term prognosis in the posterior maxilla with poor quality of bone, the sinus lift must ensure bone regeneration till the apex of the dental implant for osseointegration. An indirect sinus lift is a minimally invasive procedure where simultaneous bone condensation is achieved. During the sinus lift procedures, different graft materials are used to gain the height of the bone in the sinus. The present study aimed to evaluate the outcomes of indirect sinus lift with hydraulic pressure and the simultaneous placement of implant using platelet-rich fibrin (PRF). Methodology In total, 24 subjects aged 18-74 years with missing maxillary premolars and first and second molars who opted for dental implants placed with indirect sinus lift with hydraulic pressure and had low sinus with less residual ridge height, bone density, and bone height were assessed at one day, one week, one month, three months, and six months. Results The average mean height preoperatively was 5.573 ± 0.66 mm which showed a significant increase postoperatively to 9.603 ± 0.78 mm (p < 0.001). Mean sinus membrane lift was 4.8 ± 2.2 mm at six months. The implant stability quotient increased significantly at six months postoperatively from 69.07 ± 3.39 at the immediate postoperative time to 72.92 ± 2.714 at six months postoperatively (p < 0.001). Conclusions The current study suggests that minimally invasive indirect sinus lift with bone augmentation utilizing PRF increased residual alveolar ridge height and implant stability with fewer problems than previous sinus lift procedures in the posterior maxillary area.

RESUMEN

OBJECTIVES: The bone quantity and quality determine the prosthetic success outcome. This research was performed to evaluate the bone density for insertion of pterygoid implants in edentulous and dentulous participants with cone-beam computed tomography (CBCT). MATERIALS AND METHODS: CBCT evaluation was done for 66 dentate and edentulous patients for pterygoid implants at the pterygomaxillary region. The calculation of joint width, height, and volume of bone was done. Density of the bone was evaluated at the superior and inferior aspects of the pterygomaxillary column. RESULTS: It was observed that average pterygomaxillary joint height for dentulous (dentate) was -12.7 ± 7.2 mm, edentulous -12.4 ± 7.1 mm, the average pterygomaxillary joint width for dentulous was 8.15 ± 7.3 mm, and 8.13 ± 6.2 mm for edentulous. The average pterygomaxillary joint volume in dentulous participants was 279.4 ± 189.2 mm3 and for edentulous was 254.5 ± 176.4 mm3. There was expressively greater density of the bone in dentulous participants over edentulous participants (P < 0.05). CONCLUSION: There was better bone density found in dentate participants in comparison to edentulous participants. CBCT is a recent investigative device which measures pterygoid area efficiently. Pterygoid implants may be deliberated as an alternative method for resorbed (atrophic) maxilla.

RESUMEN

AIM: The present study was undertaken for assessing the C-reactive proteins (CRP) levels and IL-6 levels in patients with peri-implantitis. MATERIALS AND METHODS: A total of 20 patients with confirmed clinical and radiographic diagnosis of peri-implantitis were included in the present study. Another set of 20 subjects who reported for routine health check-up were included as healthy controls. All the subjects were recalled in the morning and fasting (minimum of 12 h) venous blood samples were obtained. Plain vials were used for collecting the venous blood which was sent to the laboratory for biochemical analysis. In the laboratory, levels of CRP were assessed by means of latex enhanced nephelometric method, and interleukin 6 (IL-6) was assessed by means of Elisa kit. RESULTS: Mean levels of CRPs in patients of the peri-implantitis group and the control group was found to be 0.795 mg/dL and 0.294 mg/dL respectively. Mean IL-6 levels among the patients of the peri-implantitis group and the control group was found to be 12.178 pg/ml and 6.458 pg/ml respectively. While analyzing statistically, significant results were obtained. CONCLUSION: Enhanced periodontal inflammation in peri-implantitis patients is accompanied by a considerable increase in the concentration of CRPs and IL-6.

RESUMEN

BACKGROUND: Bone grafting aims at better dental implant osseointegration and preserves the remaining alveolar bone in the socket. The success of various bone grafting materials plays a vital role in assessing future implant function. AIMS AND OBJECTIVES: The present clinical trial was aimed at evaluating the results of guided bone regeneration (GBR) with and without the bioresorbable membrane in the dental implant placement. MATERIALS AND METHODS: The 20 patients were divided into two groups (n = 10). First was Group I- GBR with bioresorbable collagen membrane (BioGide™) and second was Group II- GBR without membrane. Bone gain and bone levels were analyzed for both groups. All the collected data were analyzed statistically. RESULTS: For Group I, bone levels at baseline were nonsignificant (P = 0.2188) Similarly, nonsignificant values were seen in both groups at 3 months with bone level values of 0.25 ± 0.17 and 0.38 ± 0.24 for Group I and Group II, respectively. Changes in the bone levels were found to be 2.45 ± 0.349 and 2.58 ± 0.304 from Group I and II, respectively, inferring the nonsignificant difference with P value of 0.3723. The percentage of bone gain for intergroup at the end of 3 months was 89.15% ±0.678 for Group I and 88.68% ± 0.503%; these values were statistically nonsignificant (P = 0.982). CONCLUSION: Nonsignificant difference was observed between the two groups with and without membrane in terms of changes in bone level, percentage of bone gain, and bone defect reduction. This study concludes that the use of bone grafts significantly improves residual alveolar ridge irrespective of membrane used.