RESUMEN

The first carbonyl free mixed valence cobalt(I)/cobalt(II) compound [2{L2Co(I)(η(6)-C7H8)}](2+) [Co(II)2Cl6](2-) (1) [L = PhC(N(t)Bu)2SiCl] was obtained by the reaction of four equivalents of anhydrous CoCl2 with five equivalents of N-heterocyclic chlorosilylene L. In contrast, the reaction of L with CoBr2 yielded [L2CoBr2] (2). Compound 1 was formed by the cleavage of Co-Cl bonds, the reduction of Co(II) to Co(I) and by the coordination of a toluene molecule. The chlorosilylene (L) functions as a reducing agent as well as a neutral σ-donor ligand. The toluene molecule coordinates to the Co(I) atom in an η(6)-fashion.

RESUMEN

Functionalization of N-heterocyclic carbenes (NHCs) has an important influence on their stability, Lewis donor, and acceptor properties. In this study, we report on the selective functionalization of a four-membered N-heterocyclic bis-silylene (2,6-Ar2C6H3NSi:)2 (1) (Ar = 2,4,6-iPr3C6H2) with mono-oxygen sources N2O and Me3NO. Treatment of 1 with N2O results in the selective formation of mono-silylene (2,6-Ar2C6H3NSi(OH)2)(2,6-Ar2C6H3NSi:) (2) as a major product, along with a small amount of further oxidized product (2,6-Ar2C6H3NSi(OH)2)2 (3). Compound 2 is the first four-membered mono-silylene with a di-coordinate silicon atom.

RESUMEN

Three- and five-membered rings that bear the (Si-C-S) and (Si-C-C-C-S) unit have been synthesized by the reactions of LSiCl (1; L=PhC(NtBu)2 ) and L'Si (2; L'=CH{(CCH2 )(CMe)(2,6-iPr2 C6 H3 N)2 }) with the thioketone 4,4'-bis(dimethylamino)thiobenzophenone. Treatment of 4,4'-bis(dimethylamino)thiobenzophenone with LSiCl at room temperature furnished the [1+2]-cycloaddition product silathiacyclopropane 3. However, reaction of 4,4'-bis(dimethylamino)thiobenzophenone with L'Si at low temperature afforded a [1+4]-cycloaddition to yield the five-membered ring product 4. Compounds 3 and 4 were characterized by NMR spectroscopy, EIMS, and elemental analysis. The molecular structures of 3 and 4 were unambiguously established by single-crystal X-ray structural analysis. The room-temperature reaction of 4,4'-bis(dimethylamino)thiobenzophenone with L'Si resulted in products 4 and 5, in which 4 is the dearomatized product and 5 is formed under the 1,3-migration of a hydrogen atom from the aromatic phenyl ring to the carbon atom of the CS unit. Furthermore, the optimized structures of probable products were investigated by using DFT calculations.

Asunto(s)

RESUMEN

The first metal free selective C-F bond activation of a CF(3) group was observed with N-heterocyclic silylenes [PhC(NtBu)(2)SiCl] (1) and [CH{(C=CH(2))(CMe)(2,6-iPr(2)C(6)H(3)N)(2)}Si] (2) with PhN=C(CF(3))(2). The reaction proceeds in a 1 : 1 molar ratio to yield the mono C-F bond activated products 3 and 4 with each containing a CF(2) group. Both the reactions proceed through an unprecedented selective activation of one of the C-F bonds rather than forming the [1+2] cycloaddition product containing the three-membered SiNC rings.

Asunto(s)

RESUMEN

Isolating stable compounds with low-valent main group elements have long been an attractive research topic, because several of these compounds can mimic transition metals in activating small molecules. In addition, compounds with heavier low-valent main group elements have fundamentally different electronic properties when compared with their lighter congeners. Among group 14 elements, the heavier analogues of carbenes (R(2)C:) such as silylenes (R(2)Si:), germylenes (R(2)Ge:), stannylenes (R(2)Sn:), and plumbylenes (R(2)Pb:) are the most studied species with low-valent elements. The first stable carbene and silylene species were isolated as N-heterocycles. Among the dichlorides of group 14 elements, CCl(2) and SiCl(2) are highly reactive intermediates and play an important role in many chemical transformations. GeCl(2) can be stabilized as a dioxane adduct, whereas SnCl(2) and PbCl(2) are available as stable compounds. In the Siemens process, which produces electronic grade silicon by thermal decomposition of HSiCl(3) at 1150 °C, chemists proposed dichlorosilylene (SiCl(2)) as an intermediate, which further dissociates to Si and SiCl(4). Similarly, base induced disproportionation of HSiCl(3) or Si(2)Cl(6) to SiCl(2) is a known reaction. Trapping these products in situ with organic substrates suggested the mechanism for this reaction. In addition, West and co-workers reported a polymeric trans-chain like perchloropolysilane (SiCl(2))(n). However, the isolation of a stable free monomeric dichlorosilylene remained a challenge. The first successful attempt of taming SiCl(2) was the isolation of monochlorosilylene PhC(NtBu)(2)SiCl supported by an amidinate ligand in 2006. In 2009, we succeeded in isolating N-heterocyclic carbene (NHC) stabilized dichlorosilylene (NHC)SiCl(2) with a three coordinate silicon atom. (The NHC is 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene (IPr) or 1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene (IMes).) Notably, this method allows for the almost quantitative synthesis of (NHC)SiCl(2) without using any hazardous reducing agents. Dehydrochlorination of HSiCl(3) with NHC under mild reaction conditions produces (NHC)SiCl(2). We can separate the insoluble side product (NHC)HCl readily and recycle it to form NHC. The high yield and facile access to dichlorosilylene allow us to explore its chemistry to a greater extent. In this Account, we describe the results using (NHC)SiCl(2) primarily from our laboratory, including findings by other researchers. We emphasize the novel silicon compounds, which supposedly existed only as short-lived species. We also discuss silaoxirane, silaimine with tricoordinate silicon atom, silaisonitrile, and silaformyl chloride. In analogy with N-heterocyclic silylenes (NHSis), oxidative addition reactions of organic substrates with (NHC)SiCl(2) produce Si(IV) compounds. The presence of the chloro-substituents both on (NHC)SiCl(2) and its products allows metathesis reactions to produce novel silicon compounds with new functionality. These substituents also offer the possibility to synthesize interesting compounds with low-valent silicon by further reduction. Coordination of NHC to the silicon increases the acidity of the backbone protons on the imidazole ring, and therefore (NHC)SiCl(2) can functionalize NHC at the C-4 or C-5 position.

RESUMEN

The reactions of silylenes with organic azides are quite diverse, depending on the substituents of the silylene center and on the nature of the azide employed. Elusive silaimine with three-coordinate silicon atom L(1)SiN(2,6-Triip(2)-C(6)H(3)) (5) {L(1) = CH[(C═CH(2))(CMe)(2,6-iPr(2)C(6)H(3)N)(2)] and Triip = 2,4,6-triisopropylphenyl} was synthesized by treatment of the silylene L(1)Si (1) with a sterically demanding 2,6-bis(2,4,6-triisopropylphenyl)phenyl azide (2,6-Triip(2)C(6)H(3)N(3)). The reaction of Lewis base-stabilized dichlorosilylene L(2)SiCl(2) (2) {L(2) = 1,3-bis(2,6-iPr(2)C(6)H(3))imidazol-2-ylidene} with Ph(3)SiN(3) afforded four-coordinate silaimine L(2)(Cl(2))SiNSiPh(3) (6). Treatment of 2,6-Triip(2)C(6)H(3)N(3) with L(3)SiCl (3) (L(3) = PhC(NtBu)(2)) yielded silaimine L(3)(Cl)SiN(2,6-Triip(2)-C(6)H(3)) (7) possessing a four-coordinate silicon atom. The reactions of L(3)SiN(SiMe(3))(2) (4) with adamantyl and trimethylsilyl azide furnished silaimine compounds with a four-coordinate silicon atom L(3)(N(Ad)SiMe(3))SiN(SiMe(3)) (8) (Ad = adamantyl) and L(3)(N(SiMe(3))(2))SiN(SiMe(3)) (9). Compound 8 was formed by migration of one of the SiMe(3) groups. Compounds 5-9 are stable under inert atmosphere and were characterized by elemental analysis, NMR spectroscopy, and single-crystal X-ray studies.

RESUMEN

Two silylene transition metal complexes were prepared by reacting stable N-heterocyclic silylene L {L = PhC(NtBu)(2)SiNPh(2)}with Mn(2)(CO)(10) and Re(2)(CO)(10) respectively in a 2 : 1 ratio to yield [L(2)Mn(CO)(4)](+)[Mn(CO)(5)](-) (1) and [L(2)Re(CO)(4)](+)[Re(CO)(5)](-) (2). Both complexes and were characterized by NMR spectroscopy, EI-MS spectrometry and elemental analysis. The molecular structures of complexes 1 and 2 were established by single crystal X-ray analysis.

RESUMEN

The three-membered silacyclic ring compounds LSi[N(2)(Ph)(2)]tBu (1), LSi[HCN(Ph)(2)]tBu (2) and LSi[C(2)(Ph)(2)]tBu (3) were obtained by the treatment of base stabilized monoalkylsilylenes LSitBu (L = PhC(NtBu)(2)) with PhN=NPh, PhN=CHPh and PhC≡CPh. The reaction of PhN=NPh and PhC≡CPh with LSitBu shows a different reactivity pattern with base stabilized monochlorosilylene LSiCl. The arrangement of the three-membered ring (SiNN) in 1 is the first structurally isolated example of a siladiaziridine compound.

RESUMEN

Formyl chloride (H(Cl)C=O) is unstable at room temperature and decomposes to HCl and CO. Silicon analogue of formyl chloride, silaformyl chloride IPr·SiH(Cl)=O·B(C(6)F(5))(3) (3) (IPr = 1,3-bis(2,6-diisopropyl-phenyl)imidazol-2-ylidene), was stabilized by Lewis donor-acceptor ligands. Compound 3 is not only the first stable acyclic silacarbonyl compound but also the first silacarbonyl halide reported so far.

RESUMEN

The first base stabilized monoalkylsilylenes LSitBu (2) and LSi[C(SiMe(3))(3)] (3) (L = PhC(NtBu)(2)) were synthesized by the facile metathesis reactions of LitBu and KC(SiMe(3))(3) with LSiCl (1). The reaction of LSitBu (2) with N(2)O afforded the dimer [LSitBu(µ-O)](2) (4) which contains a four-membered Si(2)O(2) ring.

RESUMEN

Three transition-metal-carbonyl complexes [V(L)(CO)(3)(Cp)] (1), [Co(L)(CO)(Cp)] (2), and [Co(L(2))(CO)(3)](+)[CoCO)(4)](-) (3), each containing stable N-heterocyclic-chlorosilylene ligands (L; L=PhC(NtBu)(2)SiCl) were synthesized from [V(CO)(4)(Cp)], [Co(CO)(2)(Cp)], and Co(2)(CO)(8), respectively. Complexes 1-3 were characterized by NMR and IR spectroscopy, EI-MS spectrometry, and elemental analysis. The molecular structures of compounds 1-3 were determined by single-crystal X-ray diffraction.

Asunto(s)

RESUMEN

The reaction of N-heterocyclic silylene (NHSi) L [L = CH{(C[double bond, length as m-dash]CH(2))(CMe)(2,6-iPr(2)C(6)H(3)N)(2)}Si] with benzoylhydrazine, 1,2-dicarbethoxyhydrazine, 1,2-diacetylhydrazine and 1,2-bis(tert-butoxycarbonyl)hydrazine in 1 : 1 molar ratio resulted in compounds 1-4 with an almost quantitative yield and five coordinate silicon atoms. Compounds 1-4 were formed by double N-H bond activation by deliberate selection of N,N'-bis-substituted hydrazine compounds bearing the -C(O)NHNH- unit. Compounds 1-4 were characterized by NMR spectroscopy, EI-MS and elemental analysis. The molecular structures of compounds 1-3 were unambiguously established by single crystal X-ray structural analysis.

Asunto(s)

RESUMEN

Silicon(II) fluoride is unstable; therefore, isolation of the stable species is highly challenging and was not successful during the last 45 years. SiF(2) is generally generated in the gas phase at very high temperatures (~1100-1200 °C) and low pressures and readily disproportionates or polymerizes. We accomplished the syntheses of stable silicon(II) fluoride species by coordination of silicon(II) to transition metal carbonyls. Silicon(II) fluoride compounds L(F)Si·M(CO)(5) {M = Cr (4), Mo (5), W(6)} (L = PhC(NtBu)(2)) were prepared by metathesis reaction from the corresponding chloride with Me(3)SnF. However, the chloride derivatives L(Cl)Si·M(CO)(5) {M = Cr (1), Mo (2), W(3)} (L = PhC(NtBu)(2)) were prepared by the treatment of transition metal carbonyls with L(Cl)Si. Direct fluorination of L(Cl)Si with Me(3)SnF resulted in oxidative addition products. Compounds 4-6 are stable at ambient temperature under an inert atmosphere of nitrogen. Compounds 4-6 were characterized by NMR spectroscopy, EI-MS spectrometry, and elemental analysis. The molecular structures of 4 and 6 were unambiguously established by single-crystal X-ray diffraction. Compounds 4 and 6 are the first structurally characterized fluorides, after the discovery of SiF(2) about four and a half decades ago.

Asunto(s)

RESUMEN

A stable silicon analogue of an acid anhydride {PhC(Bu(t)N)(2)}Si{═O·B(C(6)F(5))(3)}O-Si(H){═O·B(C(6)F(5))(3)}{(NBu(t))(HNBu(t))CPh} (4) with a O═Si-O-Si═O core has been prepared by treating monochlorosilylene PhC(Bu(t)N)(2)SiCl (1) with H(2)O·B(C(6)F(5))(3) in the presence of NHC (NHC = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene). Compound 4 has been characterized by elemental analysis and multinuclear NMR spectroscopic investigations. The molecular structure of 4 has been established by single-crystal X-ray diffraction studies, and DFT calculations support the experimental results.

RESUMEN

The reaction of the phosphorus trihydrazide, (S)P[N(Me)-NH(2)](3) (1) with quinoline-2-carboxaldehyde (C(9)H(6)N-2-CHO) in a 1:3 ratio afforded a trishydrazone, (S)P[N(Me)-N=CH-2-C(9)H(6)N](3) (2). Crystals of 2 were grown in three different solvent media affording an unsolvated (2, monoclinic, P2(1)/n) and two solvated (2·3H(2)O, trigonal, R3 and 2·2CH(3)OH, triclinic, P ̅1) crystal forms. Each of these, while possessing an essentially similar molecular structure, adopt different crystal packing giving rise to supramolecular structures mediated by a variety of weak interactions: O-H-N, O-H-O, C-H-N, C-H-O, C-H-S, C-H-π, π-π, N-π and S-π. The reaction of 2 with Ag(ClO(4))(2)·6H(2)O in methanol afforded a dinuclear cationic cage [Ag{(S)P[N(Me)-N=CH-2-C(9)H(6)N](3)}·ClO(4)](2) (3). The molecular structure of 3 reveals a dimeric structure consisting of two Ag(I) ions that are held together by two ligands. Only two arms of the tris hydrazone ligand are involved in coordination while an unprecedented P=S→Ag(I) coordination is seen. This results in the formation of an Ag(2)S(2) dimer that is encapsulated by two trishydrazone ligands. Both compounds 2 and 3 are photoluminescent.

RESUMEN

Reactions of N-heterocyclic carbene stabilized dichlorosilylene IPr·SiCl(2) (1) (IPr = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene) with (η(5)-C(5)H(5))V(CO)(4), (η(5)-C(5)H(5))Co(CO)(2), and Fe(2)(CO)(9) afford dichlorosilylene complexes IPr·SiCl(2)·V(CO)(3)(η(5)-C(5)H(5)) (2), IPr·SiCl(2)·Co(CO)(η(5)-C(5)H(5)) (3), and IPr·SiCl(2)·Fe(CO)(4) (4), respectively. Complexes 2-4 are stable under an inert atmosphere, are soluble in common organic solvents, and have been characterized by elemental analysis and multinuclear ((1)H, (13)C, and (29)Si) NMR spectroscopy. Molecular structures of 2-4 have been determined by single crystal X-ray crystallographic studies and refined with nonspherical scattering factors.

Asunto(s)

RESUMEN

Two structurally characterized manganese [L(2)Mn(CO)(4)](+)[Mn(CO)(5)](-) (1) and rhenium [L(3)Re(CO)(3)](+)[ReCO)(5)](-) (2) silylene complexes were prepared in one pot syntheses by reacting 1 equivalent of Mn(2)(CO)(10) with 2 equivalents of stable N-heterocyclic chlorosilylene L {L = PhC(NtBu)(2)SiCl} and 1 equivalent of Re(2)(CO)(10) with 3 equivalents of L in toluene at room temperature. Both complexes 1 and 2 were characterized by single-crystal X-ray structural analysis, NMR and IR spectroscopy, EI-MS spectrometry, and elemental analysis.

RESUMEN

Three silicon centered spirocyclic compounds 1-3, possessing silicon fused six- and five-membered rings have been prepared by the reaction of NHSi (L) [L = CH{(C=CH(2))(CMe)(2,6-iPr(2)C(6)H(3)N)(2)}Si] with benzoylpyridine, diisopropyl azodicarboxylate, and 1,2-diphenylhydrazine, respectively, in a 1:1 ratio. The three spirocyclic compounds (1- 3) were obtained by three different pathways. The reaction of L with benzoylpyridine leads to the activation of the pyridine ring, and dearomatization occurred. Treatment of diisopropyl azodicarboxylate with L favors a [1 + 4]- rather than a [1 + 2]-cycloaddition product, and the azo compound was converted to hydrazone derivative. Finally the reaction of 1,2-diphenylhydrazine and L results in the elimination of hydrogen by activating one of the C-H bonds present in the phenyl ring. All three complexes 1- 3 were characterized by single crystal X-ray structural analysis, NMR spectroscopy, EI-MS spectrometry, and elemental analysis. In addition the optimized structures of probable products and possible intermediates were investigated using density functional theory (DFT) calculations.

Asunto(s)

RESUMEN

Carbophosphazene-based coordination ligands [{NC(NMe(2))}(2){NP(3,5-Me(2)Pz)(2)}] (1), [{NC(NEt)(2)}{NC(3,5-Me(2)Pz)}{NP(3,5-Me(2)Pz)(2)}] (2), [NC(3,5-Me(2)Pz)](2)[NP(3,5-Me(2)Pz)(2)] (3), [{NCCl}(2){NP(NC(NMe(2))(2))(2)}] (4), and [{NC(p-OC(5)H(4)N)}(2){NP(NC(NMe(2))(2))(2)}] (5) were synthesized and structurally characterized. In these compounds, the six-membered C(2)N(3)P ring is perfectly planar. The reaction of 1 with CuCl(2) afforded [{NC(NMe(2))}(2){NHP(O)(3,5-Me(2)Pz)}·{Cu(3,5-Me(2)PzH)(2)(Cl)}][Cl] (6). The ligand binds to Cu(II) utilizing the geminal [P(O)(3,5-Me(2)Pz)] coordinating unit. Similarly, the reaction of 2 with PdCl(2) afforded, after a metal-assisted P-N hydrolysis, [{NC(NEt)(2)}{NC(3,5-Me(2)Pz)}{NP(O)(3,5-Me(2)Pz)}·{Pd(3,5-Me(2)PzH)(Cl)}] (7). In the latter, the [P(O)(3,5-Me(2)Pz)] unit does not coordinate; in this instance, the Pd(II) is bound by a ring nitrogen atom and a carbon-tethered pyrazolyl nitrogen atom. The reaction of 3 with PdCl(2) also results in P-N bond hydrolysis affording [{NC(3,5-Me(2)Pz)(2)}{NP(O)(3,5-Me(2)Pz)}{Pd(Cl)}] (8). In contrast to 7, however, in 8, the Pd(II) elicits a nongeminal η(3) coordination from the ligand involving two carbon-tethered pyrazolyl groups and a ring nitrogen atom. Metalated products could not be isolated in the reaction of 3 with K(2)PtCl(4). Instead, a P-O-P bridged carbodiphosphazane dimer, [{NC(3,5-Me(2)Pz)NHC(3,5-Me(2)Pz)}{NP(O)}](2) (9), was isolated as the major product. Finally, the reaction of 5 with PdCl(2) resulted in [{NC(OC(5)H(4)N)}(2){NP(NC(NMe(2))(2))(2)}·{PdCl(2)}] (10). In the latter, the exocyclic P-N bonds are quite robust and are involved in binding to the metal ion. Compounds 6-10 have been characterized by a variety of techniques including X-ray crystallography. In all of the compounds, the bond parameters of the inorganic heterocyclic rings are affected by metalation.

Asunto(s)