Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 10 de 10
Filtrar
Más filtros











Base de datos
Intervalo de año de publicación
2.
Int Orthod ; 16(2): 361-373, 2018 06.
Artículo en Inglés | MEDLINE | ID: mdl-29685399

RESUMEN

INTRODUCTION: The aim of this regression analysis was to identify the determining factors, which impact the curve of Spee during its genesis, its therapeutic reconstruction, and its stability, within a continuously evolving craniofacial morphology throughout life. MATERIAL AND METHODS: We selected a total of 107 patients, according to the inclusion criteria. A morphological and functional clinical examination was performed for each patient: plaster models, tracing of the curve of Spee, crowding, Angle's classification, overjet and overbite were thus recorded. Then, we made a cephalometric analysis based on the standardized lateral cephalograms. In the sagittal dimension, we measured the values of angles ANB, SNA, SNB, SND, I/i; and the following distances: AoBo, I/NA, i/NB, SE and SL. In the vertical dimension, we measured the values of angles FMA, GoGn/SN, the occlusal plane, and the following distances: SAr, ArD, Ar/Con, Con/Gn, GoPo, HFP, HFA and IF. The statistical analysis was performed using the SPSS software with a significance level of 0.05. RESULTS: Our sample including 107 subjects was composed of 77 female patients (71.3%) and 30 male patients (27.8%) 7 hypodivergent patients (6.5%), 56 hyperdivergent patients (52.3%) and 44 normodivergent patients (41.1%). Patients' mean age was 19.35±5.95 years. The hypodivergent patients presented more pronounced curves of Spee compared to the normodivergent and the hyperdivergent populations; patients in skeletal Class I presented less pronounced curves of Spee compared to patients in skeletal Class II and Class III. These differences were non significant (P>0.05). The curve of Spee was positively and moderately correlated with Angle's classification, overjet, overbite, sellion-articulare distance, and breathing type (P<0.05). We found no correlation between age, gender and the other parameters included in the study with the curve of Spee (P>0.05). Seventy five percent (75%) of the hyperdivergent patients with an oral breathing presented an overbite of 3mm, which is quite excessive given the characteristics often admitted for this typology; this parameter could explain the overbite observed in the hyperdivergent population included in this study. For the multivariate analysis, the overbite and the sellion-articulare distance remained independently related to the curve of Spee according to the breathing type, Angle's classification, and overjet. This regression model explains 21.4% of the changes in the curve of Spee.


Asunto(s)
Arco Dental/anatomía & histología , Maloclusión/clasificación , Maloclusión/complicaciones , Sobremordida/clasificación , Sobremordida/complicaciones , Adolescente , Adulto , Puntos Anatómicos de Referencia , Cefalometría/métodos , Oclusión Dental , Cara/anatomía & histología , Femenino , Humanos , Incisivo/anatomía & histología , Masculino , Maloclusión Clase II de Angle/clasificación , Maloclusión Clase II de Angle/complicaciones , Mandíbula/anatomía & histología , Análisis Multivariante , Análisis de Regresión , Estadísticas no Paramétricas , Dimensión Vertical , Adulto Joven
4.
Int Orthod ; 15(4): 698-707, 2017 12.
Artículo en Inglés | MEDLINE | ID: mdl-29122570

RESUMEN

INTRODUCTION: The aim of this study was to examine the relationship between facial divergence and the parameters of dentomaxillary discrepancy (DMD), in particular crowding, the curve of Spee and the position of the incisors in the sagittal dimension. MATERIAL AND METHODS: A total of 90 young adult patients was selected from among the Moroccan orthodontic population attending the dentofacial orthopedic department and satisfying the following inclusion criteria: complete permanent dentition and a skeletal class I pattern with no previous orthodontic treatment, no crossbite, no periodontal disease, no mandibular asymmetry and no condylodiscal disunion. On cephalometric tracings, measurements were made of angles FMA, Go-Gn/SN, Occ/SN in the vertical direction, and of the values I/NA et i/NB in the sagittal direction. The curve of Spee and dental crowding were assessed using the one-way ANOVA test and the Bonferroni post-hoc test. Correlation analysis was performed between divergence and the different variables measured, using SPSS software with a 0.05 significance threshold. RESULTS: Patients recruited for the study had a mean age of 19.8±0.5 and were distributed as follows: 28 normodivergent, 31 hypodivergent and 31 hyperdivergent, 42 females and 48 males. Comparison showed that hypodivergent subjects had less crowding than hypo- or normodivergent individuals (P<0.05). Hypodivergent subjects had a more pronounced curve of Spee than the other two groups. This difference was not significant (P>0.05). Hyperdivergent subjects presented more labioversion and vestibular positioning of the incisors compared with the hypodivergent (P<0.05) and normodivergent (P<0.05) groups. Correlation analysis showed that crowding and the incisor positions in millimeters and in degrees were positively correlated to a moderate extent with facial divergence (r=0.3, r=0.5, r=0.4; P<0.05), while the curve of Spee was not (P>0.05). No correlation was found between age or sex and the DMD parameters (P>0.05).


Asunto(s)
Arco Dental/anatomía & histología , Cara/anatomía & histología , Incisivo/anatomía & histología , Maloclusión , Cefalometría , Femenino , Humanos , Masculino , Mandíbula/anatomía & histología , Maxilar/anatomía & histología , Marruecos , Factores Sexuales , Adulto Joven
6.
Int Orthod ; 14(4): 399-417, 2016 Dec.
Artículo en Inglés | MEDLINE | ID: mdl-27856373

RESUMEN

INTRODUCTION: Bisphenol A (BPA) is a synthetic chemical substance used as a starting ingredient in the manufacturing process of a number or orthodontic materials. It is a well-known endocrine disruptor with low estrogenic properties. The aim of this investigation is to present a systematic review regarding the issue of bisphenol A release by orthodontic materials and its impact in orthodontics. MATERIALS AND METHODS: A systematic analysis was performed by electronic search (between 1936 and 2015) on several data bases. The search was limited by using several specific key-words in two languages, English and French. Two investigators selected the responses, which met the selection criteria. RESULTS AND DISCUSSION: Of the 376 studies found, only 21 met our selection criteria: 11 of these dealt with the release of bisphenol by orthodontic materials and 10 in vitro studies described the effects of BPA leaching from orthodontic materials on human and murine cells. The rate of BPA release was well below the daily tolerable intake (DTI) (50mg/kg/day in 2006, then 50µg/kg/day in 2015) according to the European Food Safety Authority (EFSA). Theoretical exposure to BPA was 11,000 times lower than recommendations. However, other studies have shown the presence of BPA and of monomers released in large quantities at very low doses. The effects of observed BPA varied significantly (toxic and carcinogenic potential) while some studies found no effects at all. The relatively small number of studies dealing with the release of Bisphenol A by orthodontic materials, apart from orthodontic materials and their significant biological effects, has led to the absence of standard protocols and has hindered precise determination of released BPA. Moreover, the lack of coherence between the various methodological approaches and variations in the experimental protocols have resulted in a low level of proof regarding the impact of BPA by orthodontic materials. RECOMMENDATIONS: Through this study, the authors encourage clinicians to observe the following recommendations designed to reduce the amount of BPA released by materials used in orthodontics: keep the tip of the light-curing lamp as close as possible to the composite and perform indirect rather than direct light-curing; Pumice-polish the composite after bonding so as to reduce the potential amount of BPA released; reduce exposure by brushing or rinsing with a mouthwash during the first hour after bonding; follow a standardized, reproducible and expert-validated research protocol aimed at better understanding of BPA release.


Asunto(s)
Compuestos de Bencidrilo/efectos adversos , Aparatos Ortodóncicos/efectos adversos , Fenoles/efectos adversos , Animales , Humanos
7.
Int Orthod ; 14(1): 48-64, 2016 Mar.
Artículo en Inglés, Francés | MEDLINE | ID: mdl-26826965

RESUMEN

INTRODUCTION: External apical root resorption (EARR) is one of the major problems associated with orthodontic treatment. Such lesions represent an iatrogenic risk that must be detected as early as possible, with regular radiological follow-up and appropriate therapeutic precautions. The causes and mechanisms leading to susceptibility to root resorption following the application of an orthodontic force are often not clear and are generally said to be of multifactorial origin. The aim of this clinical study was to analyze the factors linked to the occurrence of moderate to severe resorption (MSR) of upper incisors during orthodontic treatment in a group of Moroccan patients treated in the Dento-Facial Orthopedic Department of the Dental Consultation and Treatment Center (Centre de consultation et de traitements dentaires [CCTD]) in Rabat. MATERIAL AND METHODS: A total of 82 patients (28% males, 72% females) aged between 12 and 27, with various malocclusions, who had been treated with fixed appliances for at least 1 year and for whom panoramic X-rays at the start, during and at the end of treatment were available, were selected randomly. The reduction in maxillary incisor root length was evaluated using resorption scores. The factors studied in relation to the risk of occurrence of MSR were: age, sex, treatment duration, extraction or non-extraction, type of malocclusion (Class I arch-length discrepancy, Class II, Class III), the vertical diagnosis (normal, supraocclusion, open bite), presence of dysfunction, impacted canines and root morphology. Statistical analysis was performed using SPSS software, version 18.0. Statistical tests used were: Kaplan-Meier analysis and the univariate and multivariate Cox models for the study of factors associated with MSR. The threshold of significance adopted was 0.05. RESULTS: The factors that were significantly associated with the occurrence of MSR at the level of the upper incisors were: tooth type, with a greater risk for the lateral incisor (HR=3.2 95% CI [2.3-4.5] P<0.001), treatments with extraction (HR=1.64 95% CI [1.16-2.33] P<0.05), the presence of supraocclusion (HR=2.17 95% CI [1.33-3.53] P<0.05) or open bite (HR=3.12 95% CI [1.66-5.86] P<0.001) and root malformation (HR=1.5 95% CI [1.09-2.07] P<0.05). Age, sex, type of malocclusion, dysfunction and impaction of canines were not associated at a statistically significant level with the risk of occurrence of MSR of the upper incisors. CONCLUSION: EARR is difficult to avoid; the orthodontist's role remains crucial in identifying risk factors so as to adopt a treatment strategy taking these factors into account. In our population, the risk of MSR in the upper incisors appeared to increase in treatments with extraction, situations of supraocclusion or open bite, and in the presence of root abnormalities. Finally, clinical recommendations for the prevention of the occurrence of MSR of the maxillary incisors are proposed, taking into account all the risk factors identified.


Asunto(s)
Incisivo , Adolescente , Adulto , Niño , Femenino , Humanos , Masculino , Maxilar , Factores de Riesgo , Resorción Radicular/etiología , Ápice del Diente , Adulto Joven
8.
Int Orthod ; 13(1): 16-25, 2015 Mar.
Artículo en Inglés | MEDLINE | ID: mdl-25703073

RESUMEN

INTRODUCTION: The main aim of this paper is to investigate the cytotoxicity of elastomeric power chains after stretching and immersion in a solution of artificial saliva. MATERIALS AND METHOD: Two brands of grey polyurethane power chains available from two different firms (GAC, G&H) were selected for cytotoxicity assay. Each segment was stretched up to an initial force of approximately 200 g. Then each segment was kept stretched using appropriate equipment. The samples were tested in artificial saliva at two pH levels, pH7 and pH4. Following incubation, the saliva was removed, filtered and placed in contact with cell culture media using the RD line. RESULTS AND DISCUSSION: At this supernatant dilution, no statistically significant difference was observed between the different groups of power chains studied in terms of cell viability. The GAC and G&H power chains, whether stretched or not and immerged in either pH7 or pH4 saliva, showed no toxic effect on RD cells (human cell line).


Asunto(s)
Materiales Dentales/toxicidad , Elastómeros/toxicidad , Aparatos Ortodóncicos , Poliuretanos/toxicidad , Saliva Artificial/química , Línea Celular Tumoral , Supervivencia Celular/efectos de los fármacos , Colorantes , Medios de Cultivo Condicionados , Materiales Dentales/química , Elasticidad , Elastómeros/química , Humanos , Concentración de Iones de Hidrógeno , Inmersión , Ensayo de Materiales , Poliuretanos/química , Estrés Mecánico , Sales de Tetrazolio , Tiazoles , Factores de Tiempo
9.
Int Orthod ; 11(1): 60-70, 2013 Mar.
Artículo en Inglés, Francés | MEDLINE | ID: mdl-23375920

RESUMEN

INTRODUCTION: The main objective of this study was to reexamine the mechanical properties of elastomeric chains after stretching in various artificial saliva solutions and in air. MATERIALS AND METHODS: Five brands of elastomeric chain manufactured by different companies were selected. For each brand, four types were tested in different artificial media. A dismountable test kit was used to stretch the chains up to various initial force levels. They were then immersed in pre-prepared solutions, with control samples exposed to air only. Residual force was measured at multiple time points using a hand-held dynamometer. RESULTS AND DISCUSSION: The force delivered by the elastomeric chains decayed rapidly and differently over time. This decay varied depending on multiple factors, discussed here.


Asunto(s)
Análisis del Estrés Dental , Elastómeros , Aparatos Ortodóncicos , Saliva Artificial/efectos adversos , Elasticidad , Falla de Equipo , Ensayo de Materiales , Fenómenos Mecánicos , Resistencia a la Tracción
10.
Int Orthod ; 10(3): 223-40, 2012 Sep.
Artículo en Inglés, Francés | MEDLINE | ID: mdl-22906378

RESUMEN

INTRODUCTION: Elastomeric chains are one of several devices used to provide force for orthodontic tooth movement, but the force they exert diminishes over time and can thus be difficult to control. The objective of this investigation was to provide a systematic review of publications pertinent to force decay in orthodontic elastomeric chains. MATERIALS AND METHODS: A systematic review was performed via electronic querying of multiple databases for the period 1970-2011. Queries were limited to a set of specific keywords in two languages (English and French). Five main reviews were consulted manually to identify relevant publications. Two investigators sorted out those studies that complied with selection criteria. RESULTS AND DISCUSSION: A total of 53 studies were found to be relevant to force decay in elastomeric chains, including 22 on force decay over time, seven on the force consequences of pre-stretching, 12 on the impact of the environment on the force delivered, and 11 on clinical efficacy. CONCLUSION: The force delivered by elastomeric chains decays rapidly over time, affecting their mechanical properties and clinical efficacy when studied in either human saliva or laboratory test media.


Asunto(s)
Análisis del Estrés Dental , Elastómeros , Aparatos Ortodóncicos , Poliuretanos , Elastómeros/química , Humanos , Ensayo de Materiales , Fenómenos Mecánicos , Poliuretanos/química , Saliva , Resistencia a la Tracción , Factores de Tiempo
SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA