RESUMEN
In this study, multivariate methodologies were applied in the optimization of a dispersive liquid-liquid microextraction (DLLME) method, aiming at the determination of Cu and Mn in coconut water samples by flame atomic absorption spectrometry. Some extractors (chloroform and CCl4), dispersants (ethanol, methanol and acetonitrile) and complexing agents (5-Br-PADAP and Dithzone) were previously tested in the extraction. A mixture design was used to optimize the component proportions formed by chloroform (10%), acetonitrile (76%), and 0.020% 5-Br-PADAP solution (14%). Doehlert design optimized the variables pH, NaCl, and buffer amounts for the extraction of both metals. The following analytical characteristics, respectively for Cu and Mn, were accessed: limit of quantification (4.83 and 3.32 µg L-1), enrichment factors (11 and 8 fold), and precision (6.6 and 6.0% RSD, n = 10). Addition/recovery tests of the analytes allowed to find values in the range of 96.5-120% for Cu and 99-107% for Mn.
Asunto(s)
Microextracción en Fase Líquida , Contaminantes Químicos del Agua , Cocos , Cobre/análisis , Manganeso , Espectrofotometría Atómica , Agua , Contaminantes Químicos del Agua/análisisRESUMEN
In the present work, multivariate designs were used to optimize an alkaline dissolution, assisted by ultrasound energy, procedure of goat meat using tetramethylammonium hydroxide (TMAH) aiming to determine Ca, Cu, Fe, K, Mg, Na and Zn by flame atomic absorption (FAAS) and emission (FAES) spectrometry. The optimal conditions found for the dissolution were in the following ranges: 0.4-0.5 g for the sample mass, 12-15 min of sonication and using 700-1000 µL of 25% TMAH at a temperature of 50 °C. The obtained limits of quantification varied between 0.221 (Mg) and 7.60 (Ca) µg g-1. Accuracy was assessed by comparing the results obtained by applying the proposed method with the digestion in an acid medium using a digesting block and by analyzing bovine liver certified reference material. The application of a t-test revealed that, at a 95% confidence level, there were no significant differences between the values obtained.
Asunto(s)
Análisis de los Alimentos/métodos , Carne/análisis , Metales/análisis , Espectrofotometría Atómica/métodos , Animales , Análisis de los Alimentos/estadística & datos numéricos , Cabras , Análisis Multivariante , Compuestos de Amonio Cuaternario/química , Solubilidad , Espectrofotometría Atómica/estadística & datos numéricos , TemperaturaRESUMEN
This study approaches the development of a method for the determination of Ca, Mg, Zn, and Fe in liquid and powdered cow milk. The method is based on sample dissolution assisted by ultrasound energy in tetramethylammonium hydroxide (TMAH) media and determination by flame atomic absorption spectrometry (FAAS). Central composite design (CCD) associated with response surface methodology and desirability function allowed the fast and efficient optimization of the variables involved in the performance of the dissolution. The developed dissolution method allowed Ca, Fe, Zn, and Mg determination in milk samples with adequate analytical characteristics for these determinations. Addition/recovery tests and analysis of a certified reference material of skimmed powdered milk (ERM-BD150) have shown that this method presents enough accuracy to carry out these analyses.