RESUMEN

BACKGROUND: The extended trochanteric osteotomy (ETO) is a surgical technique utilized to expose the intramedullary canal of the proximal femur, protect the soft tissues and promote reliable healing. However, imprecise execution of the osteotomy can lead to fracture, soft tissue injury, non-union, and unnecessary morbidity. We developed a technique to create patient specific, 3D-printed cutting guides to aid in accurate positioning of the ETO and improve osteotomy quality and outcomes. METHODS: Patient specific cutting guides were created based on CT scans using Synopysis Simpleware ScanIP and Solidworks. Custom 3D printed cutting guides were tested on synthetic femurs with foam cortical shells and on cadaveric femurs. To confirm accuracy of the osteotomies, dimensions of the performed osteotomies were compared to the virtually planned osteotomies. RESULTS: Use of the patient specific ETO cutting guides resulted in successful osteotomies, exposing the femoral canal and the femoral stem both in synthetic sawbone and cadaveric testing. In cadaveric testing, the guides allowed for osteotomies without fracture and cuts made using the guide were accurate within 6 percent error from the virtually planned osteotomy. CONCLUSION: The 3D-printed patient specific cutting guides used to aid in ETOs proved to be accurate. Through the iterative development of cutting guides, we found that a simple design was key to a reliable and accurate guide. While future clinical trials in human subjects are needed, we believe our custom 3D printed cutting guide design to be effective at aiding in performing ETOs for revision total hip arthroplasty surgeries.

RESUMEN

Background: A common tibial construct for revision total knee arthroplasty includes a long diaphyseal engaging press-fit stem. Due to tibial canal bowing, compromises are often necessary to match patient anatomy when choosing stemmed implants. The objective of this study is to determine through 3-D modeling whether current implant press-fit options appropriately fit patient anatomy, or whether an alternative angle between the stem and baseplate could increase the cortical engagement of long press-fit tibial stems. Methods: Preoperative computerized tomography scans from 100 patients undergoing TKA were imported into an image-processing software program. Three-dimensional models were created with tibial stems placed at a fixed perpendicular angle and a custom angle to the revision tibial baseplate. Stem diameter, depth, offset, and contact surface area were measured and analyzed between the 2 groups. Results: Significantly more cortical contact, larger stem diameter, and smaller offset of the custom keel from the center of the baseplate were associated with free custom tibial stem placement vs a fixed perpendicular baseplate-stem interface (P < .001). Statistically significant differences were also found between different patient demographics. Conclusions: Custom free-angle stem placement allows for increased stem diameter and cortical contact of press-fit tibial stems compared to existing constructs that must interface with the baseplate at a 90-degree angle. Current revision tibia implants limit fixation of tibial press-fit stems and often mismatch with patient anatomy. Alternative ways to fit patient anatomy may be beneficial for patients with extreme mismatch. In the future, custom keel angles may help to resolve this problem.

RESUMEN

More women are choosing a career in surgery, many of whom plan to have children during their residency and fellowship training. However, women still face perceived physical and psychological barriers to childbearing during training. In this article we review the risks of surgical exposures such as bloodborne disease, radiation, bone cement, physical labor and fatigue, and emotional stressors for the pregnant resident. Cultural barriers for pregnant residents persist, including biased comments or resentment from colleagues or attendings. Parental leave policies are inconsistent among programs and specialties. This article is intended to empower female residents and program faculty to make informed decisions and policies to support trainees, encourage diversity, and keep surgical programs competitive among top applicants.

Asunto(s)

RESUMEN

INTRODUCTION: Arthroplasty has become the standard of care for displaced femoral neck fractures in the geriatric cohort. However, details regarding optimal implant design and fixation strategy continue to be debated. We sought to determine whether cemented or press-fit hemiarthroplasties were more advantageous in terms of revision surgery, contralateral hip fractures, hospital length of stay, mortality rates, and survival. METHODS: All geriatric fragility hip fractures at a level 1 trauma center (2014 to 2019) were retrospectively reviewed for the fracture pattern, fixation methodology, and outcome, yielding 707 femoral neck fractures treated with hemiarthroplasty (309 cemented and 398 press fit). The final follow-up was either date of death or final encounter. Major end points were revision surgery, contralateral fracture, and death. A Z-score test of two proportions was used for dichotomous variables, and a two-tailed t -test was used for continuous variables. Cox proportional hazard was used for revision surgery-free survival between groups, adjusting for age, sex, and American Society of Anesthesiologists status. RESULTS: Patients who underwent press-fit hemiarthroplasty had a significantly higher rate of revision surgery (7.8% vs 3.9%; P = 0.006). Press-fit cases had a trend toward a decreased risk of contralateral fracture (13% vs 9.8%; P = 0.12), although this did not reach significance. Both groups had similar length of stay ( P = 0.08) and death rates ( P = 0.39). Of those who died, there was a trend toward longer survival in patients who received a press-fit hemiarthroplasty (413 vs 615 days; P < 0.001). There was a trend toward longer survival without repeat surgery in the cemented group without reaching significance (hazard ratio, 0.66 [0.34 to 1.23]; P = 0.201). CONCLUSION: In this study, we found a markedly longer survival time after press-fit hemiarthroplasty, which we believe reflects surgeons' tendencies to cement the femoral prosthesis in patients with more comorbidities. However, press-fit hemiarthroplasties were more likely to result in repeat procedures on the same hip. Displaced geriatric femoral neck fractures may benefit from a cemented rather than press-fit hemiarthroplasty.

Asunto(s)

RESUMEN

Same-day discharge (SDD) surgery in total hip arthroplasty (THA) has been shown to have similar outcomes to non-SDD THA in select patient populations. Hip resurfacing arthroplasty (HRA) is an alternative to THA for young, active patients, making them ideal candidates for SDD. This study compared the safety and efficacy of non-SDD HRA and SDD HRA for specific postoperative outcomes. An electronic data warehouse query was performed for procedures labeled "hip resurfacing." Data collected included demographics, surgical factors, and quality metrics. Statistical analyses were evaluated using a graphing and statistics software program. Categorical variables were analyzed with chi-square tests and continuous variables with Student's t tests, with P<.05 deemed significant. Sixty-three of 274 total HRAs were enrolled in this SDD HRA protocol. No significant difference was observed between SDD HRA and non-SDD HRA baseline characteristics. On postoperative day 0, 98.41% of SDD HRA recipients were discharged successfully. The SDD HRA recipients had shorter stays, with 1.59% requiring a hospital stay of 2 days or more compared with 56.87% of non-SDD HRA recipients (P<.0001). The non-SDD HRA recipients were found to have shorter surgical times than SDD HRA recipients (104.74 vs 125.51 minutes, P=.01). Rates of infection, periprosthetic fractures, emergency department visits, and hospital readmissions were equivalent (P=.99). Same-day discharge HRA is a safe and effective procedure with similar outcomes to non-SDD HRA regarding infections, fractures, emergency department visits, and readmissions. The major benefit of SDD is a shorter hospital stay that may lead to decreased cost while preserving and enhancing quality of care and patient satisfaction. [Orthopedics. 2020;43(6):e595-e600.].

Asunto(s)

RESUMEN

Electronic health record (EHR) technologies have improved the ease of access to structured clinical data. The standard means by which data are collected continues to be manual chart review. The authors compared the accuracy of manual chart review against modern electronic data warehouse queries. A manual chart review of the EHR was performed with medical record numbers and surgical admission dates for the 100 most recent inpatient venous thromboembolic events after total joint arthroplasty. A separate data query was performed with the authors' electronic data warehouse. Data sets were then algorithmically compared to check for matches. Discrepancies between data sets were evaluated to categorize errors as random vs systematic. From 100 unique patient encounters, 27 variables were retrieved. The average transcription error rate was 9.19% (SD, ±5.74%) per patient encounter and 11.04% (SD, ±21.40%) per data variable. The systematic error rate was 7.41% (2 of 27). When systematic errors were excluded, the random error rate was 5.79% (SD, ±7.04%) per patient encounter and 5.44% (SD, ±5.63%) per data variable. Total time and average time for manual data collection per patient were 915 minutes and 10.3±3.89 minutes, respectively. Data collection time for the entire electronic query was 58 seconds. With an error rate of 10%, manual chart review studies may be more prone to type I and II errors. Computer-based data queries can improve the speed, reliability, reproducibility, and scalability of data retrieval and allow hospitals to make more data-driven decisions. [Orthopedics. 2020;43(5):e404-e408.].

Asunto(s)