RESUMEN
This study investigates the potential of using small amounts of ionic liquids (IL) to enhance ultrasound-assisted extraction of lipids content from green microalgae. Three imidazolium-based ILs (butyl, octyl and dodecyl), each of them with two anions (bromide and acetate) were tested as additives. Viscosity and surface tension of the ILs aqueous mixtures were analyzed to determine the influence of ILs' anions and alkyl chain length, whereas KI dosimetry experiments were used as an indicator of radicals formation. A key finding suggests that the small addition of ILs improves the ultrasonication either by enhancing the viscosity and reducing the water surface tension, leading to a more powerful acoustic cavitation process or by increasing HO° production likely to oxidize the microalgae cells membranes, and consequently disrupting them on a more efficient manner. KI dosimetry also revealed that long ILs alkyl chain is detrimental. This experimental observation is confirmed thus strengthened as the yield of extracted lipids from green microalgae has shown an incremental trend when the IL concentration also increased. These hypotheses are currently under investigation to spot detailed impact of ILs on cavitation process.
RESUMEN
Biodiesel production via esterification/transesterification reactions can be catalyzed by homogenous or heterogeneous catalysts. Development of heterogeneous catalysts for biodiesel production is highly advantageous due to the ease of product purification and of catalyst recyclability. In this current work, a novel acidic [DABCODBS][CF3SO3]2 dicationic ionic liquid (DIL) was used as heterogeneous catalyst to produce biodiesel using oleic acid as model oil. The esterification was conducted under ultrasonic irradiation (20â¯kHz) using a 14â¯mm ultrasonic horn transducer operated at various duty cycles. It was observed that the duty cycle, amplitude, methanol to oil molar ratio, catalyst amount and reaction temperature were the major factors that greatly impact the necessary reaction time to lead to a high yield of biodiesel. The reaction conditions were optimized with the aid of Response Surface Methodology (RSM) designed according to the Quadratic model of the Box Behnken method. The optimum conditions were found to be at catalyst amount of 0.64â¯mol%, methanol to oil ratio of 14.3:1, temperature of 59⯰C, reaction time of 83â¯min and amplitude of 60% in continuous mode. The results showed that the oleic acid was successfully converted into esters with conversion value of 93.20% together with significant reduction of reaction time from 7â¯h (using mechanical stirring) to 83â¯min (using ultrasonication). The results also showed that the acidic DIL catalyst we designed purposely was efficient to catalyze the ultrasonic-assisted esterification yielding high conversion of oleic acid to methyl oleate on short times. The DIL was also recycled and reused for at least five times without significant reduction in performance. Overall, the procedureoffersadvantages including short reaction time, good yield, operational simplicity and environmentally benign characteristics.
RESUMEN
A promising method of Carbon dioxide (CO2) valorization is to use green microalgae photosynthesis to process biofuel. Two Phase Partitioning Bioreactors (TPPBR) offer the possibility to use non-aqueous phase liquids (NAPL) to enhance CO2 solubility; thus making CO2 available to maximize algae growth. This requires relatively less toxic hydrophobic Ionic Liquids (ILs) that comprise a new class of ionic compounds with remarkable physicochemical properties and thus qualifies them as NAPL candidates. This paper concerns the synthesis of ILs with octyl and butyl chains as well as different cations containing aromatic (imidazolium, pyridinium) and non-aromatic (piperidinum, pyrrolidinium) rings for CO2 absorption studies. The authors measured their respective toxicity levels on microalgae species, specifically, Scenedesmus quadricauda, Chlorella vulgaris and Botryococcus braunii. Results revealed that octyl-based ILs were more toxic than butyl-based analogues. Such was the case for bmim-PF6 at double saturation with an absorbance of 0.11, compared to Omim-PF6 at 0.17, bmim-NTf2 at 0.02, and Omim-NTf2 at 0.14, respectively. CO2 uptake results for ILs bearing octyl-based chains compared to the butyl analog were 54% (nCO2/nIL) (i.e., moles of CO2 moles of IL) and 38% (nCO2/nIL), respectively. Conclusively, 1-butyl-1-methylpiperidinium absorbed 13% (nCO2/nIL) and appeared the least toxic, having an absorbance of 0.25 at 688 nm (double saturation at 7 d) compared to 1-butyl-3-methylimidazolium, which showed the highest toxicity with zero absorbance. Accordingly, these findings suggest that 1-butyl-1-methylpiperidinium is capable of transporting CO2 to a system containing green microalgae without causing significant harm; thus allowing its use in TPPBR technology.