RESUMEN

OBJECTIVES: This study assessed the shear bond strength (SBS) of stainless steel (SS) orthodontic brackets to specimens fabricated from polymethyl methacrylate (PMMA) temporary restorative material by 3D-printing, computer-aided design/computer-aided manufacturing (CAD/CAM) technology, and the conventional technique, after surface treatment by sandblasting and laser. MATERIAL AND METHODS: In this in vitro study, 60 disc-shaped specimens with 8mm diameter and 1mm height were fabricated from PMMA temporary restorative material by 3D-printing, CAD/CAM, and the conventional technique. In each group (n=20), half of the specimens were sandblasted while the other half underwent Er,Cr:YSGG laser irradiation. Brackets were bonded to the specimens and underwent thermocycling followed by SBS testing. Data were analysed by one-way ANOVA, independent t-test, and LSD test (alpha=0.05). RESULTS: A significant difference existed among the three fabrication methods in SBS in both laser (P<0.001) and sandblasting (P<0.001) surface treatment groups. In laser group, the mean SBS of CAD/CAM (P=0.000) and conventional (P=0.000) groups was significantly lower than that of 3D-printing group. In sandblasting group, the SBS of CAD/CAM group was significantly lower than 3D-printing (P=0.000) and conventional (P=0.000) groups. The mean SBS of laser-treated specimens was significantly higher than sandblasted specimens in 3D-printing group (P=0.000), and significantly lower than sandblasted specimens in the conventional group (P=0.000). A significantly higher SBS was obtained by laser treatment compared with sandblasting irrespective of the fabrication method (P=0.000). CONCLUSION: The highest SBS of SS orthodontic brackets to temporary restorative material was recorded for 3D-printed specimens treated by Er,Cr:YSGG laser irradiation.

Asunto(s)

RESUMEN

Transplantation of one tooth to another site in the same individual can be considered an attractive alternative to dental implants or fixed prostheses. This study reports the treatment results of a 16-year-old female with severe crowding in upper and lower arches and a fractured mandibular premolar with a poor prognosis. The crowding of the lower left quadrant was relieved by the extraction of the first premolar. This extracted tooth with a complete root was transplanted to the right quadrant with the fractured tooth. Platelet-rich fibrin can stimulate and accelerate periodontal healing. The platelet concentrate of this patient was prepared and applied to the socket wall at the time of surgery. The acceptable occlusion and the excellent 4-year prognosis of the transplanted tooth are presented.

RESUMEN

BACKGROUND AND AIMS: Different methods are available for making temporary restorations. The purpose of this study was to determine and compare the shear bond strength of orthodontic brackets on temporary crowns made by three different methods. MATERIALS AND METHODS: In this experimental study, disc form samples (N=54) were made in dimensions 8×1mm, according to the manufacturer's instructions. In this study, we had three groups (N=18) based on manufacturing methods (3D printing, conventional, and CAD/CAM). Following surface preparation of the samples, the brackets were bonded in the centre of the discs. Before the shear bond strength test, the samples were subjected to the thermocycling process. The shear bond strength of brackets was measured by Universal Testing Machine. Data were analysed by one-way ANOVA and LSD post hoc test. RESULTS: The findings indicated that the mean shear bond strength of orthodontic stainless-steel brackets on temporary crowns varied between CAD/CAM and 3D printing methods (P<0.001) and also between CAD/CAM and conventional methods (P<0.001). The mean shear bond strength of orthodontic stainless steel brackets on temporary crowns was not different between 3D printing and conventional methods (P=0.7). CONCLUSION: The shear bond strength of orthodontic stainless-steel brackets bonded to temporary crowns fabricated by conventional and 3D printing methods was similar, and the shear bond strength in the samples fabricated by CAD/CAM method was lower than other specimens.

Asunto(s)

RESUMEN

INTRODUCTION: This randomized controlled clinical trial aimed to assess the effect of LED5 and LLLT6 in a three-arm parallel setting. METHODS: Sixty patients who needed the maxillary first premolar extraction were allocated to three groups using the stratified block randomization method. In the LED group, a custom-made device with a wavelength of 640nm and a power density of 40 mW/cm2 was used 5min/day. In the laser group, Ga Al As7 laser with a wavelength of 810nm and a power of 100 mW was used on days 0, 3, 30, and 60 each time for 18seconds. Patients in the control group received placebo treatment as the laser group protocol, using a coated light cure device. Models were made at baseline and monthly until the end of the retraction. The rate of canine retraction was the primary outcome, while canine rotation and pain were secondary outcomes. The final data were anonymous for the outcome assessor and statistical consultant. Data were analyzed per protocol using a linear mixed model. RESULTS: The rate of canine retraction significantly increased by 60.8% in the laser group, while it increased not significantly by 26% in the LED group compared with the control group. There was no significant difference among the groups in terms of tooth rotation and pain. CONCLUSIONS: LLLT can accelerate orthodontic tooth movement (OTM). LED with the present setting couldn't increase the rate of OTM. LLLT and LED did not affect canine rotation or pain. TRIAL REGISTRATION: IRCT20120220009086N4. On 1 June 2019 was retrospectively registered.

Asunto(s)

RESUMEN

Introduction: This study sought to evaluate the efficacy of lasercision corticotomy for the acceleration of canine movement. Our secondary objectives were assessing the canine rotation, the rate of anchorage control, the level of pain, and the gingival index (GI). Methods: Twelve orthodontic patients (9 females and 3 males) referring to the School of Dentistry and one dental clinic from May 2019 to September 2019 participated in this split-mouth randomized clinical trial. The allocation of the test and control sides was performed by flipping a coin. The mean age of patients was 18.91±3.87 years (range 15-30 years). The treatment plan included maxillary first premolar extraction. Following the initial leveling and alignment phase, an initial impression was made. Corticotomy was carried out with the erbium, chromium-doped yttrium scandium gallium garnet (Er, Cr: YSGG) laser (3.5 W, 30 Hz, 40% air, 80% water) in one maxillary quadrant (the laser side). Canine retraction was immediately initiated following surgery using nickel-titanium closed-coil springs with 150 g force. The impression was repeated 1 month after the onset of retraction. The casts were scanned, and the distance between the canine cusp tip and the rugae line was measured to quantify the amount of anteroposterior canine movement. The molar anchorage control was also evaluated by measuring the distance between the mesial contact of the permanent first molar and the rugae line. Gingival health was evaluated using the GI. The modified McGill pain questionnaire was used to assess the level of patients' pain. Results: Lasercision corticotomy accelerated canine retraction with no adverse effect on gingival health. Anchorage loss in the posterior teeth and pain scores were not significantly different between the control and laser sides. Conclusion: Laser corticotomy can effectively accelerate canine retraction with no complications or discomfort for the patients.

RESUMEN

OBJECTIVES: This study aimed to assess the relationship of frontal sinus height and width with the cervical vertebral maturation (CVM) for assessment of skeletal maturity. MATERIALS AND METHODS: This retrospective study evaluated lateral cephalograms of 132 patients between 8 to 21 years, including 66 males and 66 females. For each of the six stages of the CVM, 22 patients (11 males and 11 females) were evaluated. The Ertuk's method was used to measure the height and width of the frontal sinus. The sinus height to width ratio was calculated and considered as the sinus index. The CVM was evaluated on the same lateral cephalograms using the Baccetti's method. The correlation of frontal sinus height and width with the CVM was analyzed, and comparisons were made using independent t-test, ANOVA, Mann-Whitney test, and Kendall's tau-b correlation coefficient. RESULTS: The sinus width was 10.85±2.7 mm in males and 9.47±2.6 mm in females. The sinus index was 2.43±0.37 in males and 2.66±0.32 in females (P<0.000). The frontal sinus index and width were significantly greater in males but the sinus length was not significantly different between males and females (P=0.383). Significant differences were found in stages 2 and 3, and also 4 and 5 in females and 2 and 3, 3 and 4, and 4 and 5 in males. The mean frontal sinus index had a significant correlation with the CVM stage in both groups. CONCLUSION: According to the results, the frontal sinus index cannot be used as a predictor of skeletal maturity.

RESUMEN

OBJECTIVE: This study aimed to assess the effect of carbon dioxide (CO2) laser on prevention of white spot lesions (WSLs) associated with fixed orthodontic treatment. METHODS: In this parallel controlled trial, 554 maxillary anterior teeth in 95 patients with age range of 12-30 years were included. The samples were randomly divided in two groups: 1) CO2 laser (n=278) and 2) control (n=276) groups. Following bracket attachment, the teeth in the laser group were exposed to CO2 laser (0.4 mw, 10.6 µm, 5 Hz) for 20 s, and the control group received placebo light. Incidence, severity, and extent of the lesions were assessed in four surface regions (gingival, incisal, mesial, and distal) at baseline and 6 months post-irradiation. The inter-group comparison was performed by the Mann-Whitney U test and McNemar analysis. RESULTS: A significant difference regarding WSLs incidence in all teeth was observed between the two study groups (p<0.001). The two study groups illustrated a significant difference in lesion extent and incidence in incisal, mesial, and distal regions (p<0.05). The WSLs were significantly different in terms of severity in the incisal and mesial sites (p<0.05). CONCLUSION: The CO2 laser irradiation seemed to effectively prevent incidence of WSLs. In addition, its effectiveness varied depending on the surface region.

RESUMEN

OBJECTIVES: The aim of this study was to compare two initial arch wires, 0.014″ A-NiTi and 0.016″ Heat Activated NiTi (HANT), for amount of tooth alignment and perception of pain. MATERIALS AND METHODS: In total, 59 orthodontic patients (21 males and 38 females) from three orthodontic clinics participated in this 2-arm, parallel-group clinical trial and were randomized to 0.014″ A-NiTi (n=30) or 0.016″ HANT groups (n=29). Patient recruitment commenced in April 2016 and ended in December 2016. Age of the patients was between 12 to 25 years with an average of 17.92±3.74 years. Eligibility criteria included permanent dentition, non-extraction treatment plan in lower arch, Irregularity Index>2 in lower arch, no systemic disease influencing pain, no chronic Non Steroid Anti Inflammatory Drug (NSAID) therapy, and no history of dental pain, mucosal ulcers or temporomandibular disorders (TMD). Blinding was applicable to the patients and outcome assessment. The primary outcome was to compare the reduction of the Irregularity Index mean from bonding sessions to 4 weeks later in these groups and the secondary outcome was evaluation of the pain according to the modified McGill Pain Questionnaire (MPQ) with Visual Analogue Scale questionnaire (VAS). RESULTS: The mean differences of irregularity indices between the two groups are not statistically significant (95% CI: 0.39-1.03; P=0.36) and according to the questionnaire, there was no significant difference between the two groups in trigger, site, description, duration, beginning, medication, and pain reduction over time. However, the VAS scale of HANT group was significantly higher than that of A-NiTi (P=0.04). CONCLUSION: Results from this investigation suggested that there was no clinical difference in amount of tooth alignment and perception of pain between 0.014″ A-NiTi and 0.016″ HANT wires.

Asunto(s)

RESUMEN

Objective. Our aim in this paper was to investigate the possible genetic association between three Ser563Asn, Leu125Val and Arg670Gly polymorphisms of the PECAM-1 gene and periodontitis. Methods. Genomic DNA was isolated from whole blood of 105 periodontal patient (52 with chronic periodontitis and 53 with aggressive periodontitis) and 101 healthy individuals. Samples were genotyped and analyzed for the three single-nucleotide polymorphisms (SNPs) of PECAM-1 using polymerase chain reaction with sequence-specific primers (PCR-SSPs). Results. A statistically significant difference was found between the genotypic distribution of the Ser563Asn polymorphism in patients with periodontitis compared to controls (P = 0.02). But there were no statistically significant difference between the allele frequencies in the different groups (P = 0.05). The other two polymorphisms did not show a statistically significant difference in their allele and genotype frequencies between the groups. There was no statistically significant difference found for any of the polymorphisms allele and genotype distribution in aggressive and chronic periodontitis either. Conclusions. No significant association was found between the polymorphism tested and the subgroups of periodontitis, further research is still necessary to determine whether this polymorphism can be used as a genetic marker of periodontitis.