RESUMEN

Radio frequency identification (RFID) technology is crucial in revolutionizing the food supply chain and combating global food waste. However, this technology faces challenges in full integration due to disruptive effects on tags caused by the dielectric properties of food and beverage ingredients, chemical constituents, and their packaging. This paper aims to demonstrate the effect of packaging and beverage contents on RFID tag performance. Three commercially available ultra-high frequency (UHF) RFID tags with different designs were tested on polyethylene terephthalate (PET) bottles, measuring tag performance through sensitivity, backscatter, and read range in the presence of various water-based solutions and commercially available beverages. The results highlight the substantial impact of the beverage type and tag design on RFID performance. The results of this study showed that tag 3 was the most consistent and readable tag amongst those tested in the presence of different beverage contents. Tag 3 resulted in a sensitivity ranging from -0.49 to -2.01 dBm, backscatter from -38.16 to 43.59 dBm, and read range from 1.58 to 1.88 m, while tag 1 performed the best in the presence of an empty PET bottle resulting in a sensitivity of -20.78 dBm, backscatter of -23.65 dBm, and read range of 16.34 m. The results of this study can be used for further investigations to develop a mathematical model that predicts the RFID tag performance based on the food composition. This model will be helpful for the design of the tags while facilitating the adoption of smart packaging for food traceability.

RESUMEN

Industrial processing of tart cherries (Prunus cerasus L.) produces bioproducts like cherry pits (CP), which contribute to adverse environmental effects. To identify sustainable strategies to minimize the environmental impact of cherry processing, we investigated their potential value as antioxidants for prospective utilization within cosmeceutical applications. Untargeted metabolomic analyses of water and water: ethanol CP extracts using an eco-friendly technique revealed significant enrichment in coumaroyl derivatives and flavonoids with congruent metabolite representation regardless of the extraction solvent. The antioxidant activity of tart CP extracts was evaluated on human skin cells exposed to H2O2 or LPS, modeling environmentally induced oxidants. Notably, both CP extracts provide antioxidant activity by reducing H2O2 or LPS-induced ROS in human skin keratinocytes without affecting cell viability. The CP extracts increased the expression of CAT and SOD1 genes encoding antioxidant regulatory enzymes while decreasing the expression of NOS2, a pro-oxidant regulator. These findings reveal the antioxidant properties of tart CP, offering new opportunities to produce natural-based skin care products and adding economic value while providing sustainable options to reduce the environmental impact of food byproducts.

RESUMEN

The fabrication of biodegradable, bioabsorbable, and biocompatible vascular scaffolds with enhanced mechanical and biological properties that are able to modulate local inflammation and induce endothelialization after surgical implant is still a challenge. In this work, a fibrous scaffold, made of poly(ε-caprolactone) and poly(glycerol sebacate), was fabricated to be potentially used as a small-diameter graft in vascular surgery. The novelty of this research is represented by the direct incorporation of quercetin, a well-known antioxidant compound with several biological properties, into a polymeric scaffold obtaining a vascular construct able to modulate two key factors involved in postsurgical inflammation, matrix metalloproteinase-9 and endothelial nitric oxide synthase. For its production, an electrospinning apparatus, a solution made of the two polymers (both 20% (w/v), mixed at the ratio 1:1 (v/v)), and free quercetin (0.05% (w/v)) were used. Scanning electron and atomic force microscopies were employed to investigate the morphological properties of the fabricated electrospun scaffolds. Furthermore, physicochemical properties, including Fourier-transform infrared spectroscopy, mass loss, fluid uptake, quercetin release, mechanical properties, and biological activity of the scaffolds were studied. The expression of matrix metalloproteinase-9, tissue inhibitor of metalloproteinase-1, and of endothelial nitric oxide synthase was evaluated when the quercetin-functionalized scaffold was exposed to  human endothelial cells treated with tumor necrosis factor-α. The results of this study confirmed the feasibility of incorporating free quercetin during the electrospinning process to impart biological properties to small-diameter vascular prostheses.

Asunto(s)

RESUMEN

Food supply chain is a rapidly growing integrated sector and covers all the aspects from farm to fork, including manufacturing, packaging, distribution, storing, as well as further processing or cooking for consumption. Along this chain, smart packaging could impact the quality, safety, and sustainability of food. Packaging systems have evolved to be smarter with integration of emerging electronics and wireless communication and cloud data solutions. Although there are many factors causing the loss and waste issues for foods throughout the whole supply chain of food and there have been several articles showing the recent advances and breakthroughs in developing smart packaging systems, this review integrates these conceptual frameworks and technological applications and focuses on how innovative smart packaging solutions are beneficial to the overall quality and safety of food supply by enhancing product traceability and reducing the amount of food loss and waste. We start by introducing the concept of the management for the integrated food supply chain, which is critical in tactical and operational components that can enhance product traceability within the entire chain. Then we highlight the impact of smart packaging in reducing food loss and waste. We summarize the basic information of the common printing techniques for smart packaging system (sensor and indicator). Then, we discuss the potential challenges in the manufacturing and deployment of smart packaging systems, as well as their cost-related drawbacks and further steps in food supply chain.

Asunto(s)

RESUMEN

Treatment of postsurgical infections, associated with orthopedic surgeries, has been a major concern for orthopedics. Several strategies including systematic and local administration of antibiotics have been proposed to this regard. The present work focused on fabricating alginate (Alg) modified brushite (Bru) cements, which could address osteogeneration and local antibiotic demands. To find the proper method of drug incorporation, Gentamicin sulfate (Gen) was loaded into the samples in the form of solution or powder. Several characterization tests including compression test, morphology, cytotoxicity, and cell adhesion assays were carried out to determine the proper concentration of Alg as a modifier of the Bru cement. The results indicated that addition of 1 wt% Alg led to superior mechanical and biological properties of the cement. Moreover, Alg addition changed the morphology of the cement from plate and needle-like structures to petal-like structure. Fourier transform infrared spectroscopy results confirmed the successful loading of Gen on the cements, specifically when Gen solution was used, and X-Ray Diffractometer result indicated that Gen caused a decrease in crystalline size. Furthermore, thermal analysis revealed that Gen-loaded sample had more stable structure as the transformation temperature slightly shifted to a higher one. The stability study confirmed the chemical stability and adequate mechanical performance of the cements within 1 month of soaking time. Finally, the addition of Alg has a positive impact on the release behavior at low concentration of Gen solution so that 20% decrease within 2 weeks of release experiment was remarkably detected.

Asunto(s)

RESUMEN

Traditional wound dressings are not effective enough to regulate the moisture content and remove excessive exudate from the environment. Wet wound dressings formed from hydrogels such as alginate are widely used in clinical practice for treatment of skin disorders. Here, we functionalize alginate dressings with natural antioxidants such as curcumin and t-resveratrol to render them both anti-inflammatory and antibacterial. The hydrogel maintains excellent mechanical properties and oxygen permeability over time. The release rate of the compounds from the hydrogels is assessed and their impact on bacterial and cellular growth is evaluated. The antioxidant compounds act as bactericidal agents and improve cell viability. The optimal concentration of active compounds in the engineered alginate-based dressings is determined.

Asunto(s)

RESUMEN

Processing of cocoa (Theobroma cacao L.) beans responsible for agricultural exports leads to large amounts of solid waste that were discarded, however, this one presents high contents of metabolites with biological activities. The major objective of this study was to valorise cocoa agroindustrial residue obtained by hydraulic pressing for extract rich in antioxidants. For it, the centesimal composition of residue was investigated, the green extraction was carried out from the residue after, the bioactive compounds, sugar contents and screaming by HPTLC were quantified for extract. The extract has a total polyphenol content of 229.64 mg/g and high antioxidant activity according to ABTS 225.0 µM/g. HTPLC analysis confirmed the presence in the extract, residue of terpenes, sesquiterpenes, flavonoids and antioxidant activity. These results, as a whole, suggest that the extract from the cocoa residue has interesting characteristics to alternative crops with potential industrial uses.

Asunto(s)

RESUMEN

Cupuassu (Theobroma grandiflorum Schum.) is a popular Amazonian fruit because of its intense aroma and nutritional value, whose lipid fraction is alternatively used in cosmetics. To preserve active principles and ensure their controlled release, extract was microencapsulated by spray drying. Influence of spray-drying conditions on microencapsulation of cupuassu seed by-product extract was investigated according to a 33-Box Behnken factorial design, selecting inlet temperature, maltodextrin concentration and feed flowrate as independent variables, and total polyphenol and flavonoid contents, antiradical power, yields of drying and microencapsulation as responses. Fitting the results by second-order equations and modelling by Response Surface Methodology allowed predicting optimum conditions. Epicatechin and glycosylated quercetin were the major microencapsulated flavonoids. Microparticles showed satisfactory antiradical power and stability at 5 °C or under simulated gastrointestinal conditions, thus they may be used to formulate new foods or pharmaceuticals.

Asunto(s)

RESUMEN

PURPOSE: Phenolic compounds (PC) of virgin olive oil exert several biochemical and pharmacological beneficial effects. Some dietary PC seem to prevent/improve obesity and metabolic-related disorders such as non-alcoholic fatty liver disease (NAFLD). We investigated the possible effects of PC extracted from olive pomace (PEOP) and of the main single molecules present in the extract (tyrosol, apigenin, oleuropein, p-coumaric and caffeic acid) in protecting hepatocytes and endothelial cells against triglyceride accumulation and oxidative stress. METHODS: Rat hepatoma and human endothelial cells were exposed to a mixture of oleate/palmitate to mimic the condition of NAFLD and atherosclerosis, respectively. Then, cells were incubated for 24 h in the absence or in the presence of PC or PEOP. Different parameters were evaluated, such as lipid accumulation and oxidative stress-related markers. RESULTS: In hepatic cells, expression of peroxisome proliferator-activated receptors (PPARs) and of stearoyl-CoA desaturase 1 (SCD-1) were assessed as index of lipid metabolism. In endothelial cells, expression of intercellular adhesion molecule-1 (ICAM-1), activation of nuclear factor kappa-B (NF-kB), release of nitric oxide (NO), and wound-healing rate were assessed as index of inflammation. CONCLUSION: PEOP extract ameliorated hepatic lipid accumulation and lipid-dependent oxidative imbalance thus showing potential applications as therapeutic agent tuning down hepatosteatosis and atherosclerosis.

Asunto(s)

RESUMEN

An acidic thermostable protease was extracellularly produced either in shake flask or in stirred tank bioreactor by an Aspergillus foetidus strain isolated from the Brazilian savanna soil using different nitrogen sources. Its maximum activity (63.7 U mL-1) was obtained in a medium containing 2% (w/v) peptone. A cultivation carried out in a 5.0 L stirred-tank bioreactor provided a maximum protease activity 9% lower than that observed in Erlenmeyer flasks, which was obtained after a significantly shorter (by 16-29%) time. Protease purification by a combination of gel-filtration chromatography resulted in a 16.9-fold increase in specific activity (248.1 U g-1). The estimated molecular weight of the purified enzyme was 50.6 kDa, and the optimal pH and temperature were 5.0 and 55 °C, respectively. The enzyme was completely inhibited by pepstatin A, and its activity enhanced by some metals. According to the inhibition profiles, it was confirmed that the purified acid protease belongs to the aspartic protease type. These results are quite promising for future development of large-scale production of such protease, which can be useful in biotechnological applications requiring high enzyme activity and stability under acidic conditions.

Asunto(s)

RESUMEN

The cocoa extract (Theobroma cacao L.) has a significant amount of polyphenols (TP) with potent antioxidant activity (AA). This study aims to optimise microencapsulation of the extract of cocoa waste using chitosan and maltodextrin. Microencapsulation tests were performed according to a Box-Behnken factorial design, and the results were evaluated by response surface methodology with temperature, maltodextrin concentration (MD) and extract flowrate (EF) as independent variables, and the fraction of encapsulated TP, TP encapsulation yield, AA, yield of drying and solubility index as responses. The optimum conditions were: inlet temperature of 170 °C, MD of 5% and EF of 2.5 mL/min. HPLC analysis identified epicatechin as the major component of both the extract and microparticles. TP release was faster at pH 3.5 than in water. These results as a whole suggest that microencapsulation was successful and the final product can be used as a nutrient source for aquatic animal feed. Highlights Microencapsulation is optimised according to a factorial design of the Box-Behnken type. Epicatechin is the major component of both the extract and microcapsules. The release of polyphenols from microcapsules is faster at pH 3.5 than in water.

Asunto(s)

RESUMEN

Marine microalgae and seaweeds (microalgae) represent a sustainable source of various bioactive natural carotenoids, including ß-carotene, lutein, astaxanthin, zeaxanthin, violaxanthin and fucoxanthin. Recently, the large-scale production of carotenoids from algal sources has gained significant interest with respect to commercial and industrial applications for health, nutrition, and cosmetic applications. Although conventional processing technologies, based on solvent extraction, offer a simple approach to isolating carotenoids, they suffer several, inherent limitations, including low efficiency (extraction yield), selectivity (purity), high solvent consumption, and long treatment times, which have led to advancements in the search for innovative extraction technologies. This comprehensive review summarizes the recent trends in the extraction of carotenoids from microalgae and seaweeds through the assistance of different innovative techniques, such as pulsed electric fields, liquid pressurization, supercritical fluids, subcritical fluids, microwaves, ultrasounds, and high-pressure homogenization. In particular, the review critically analyzes technologies, characteristics, advantages, and shortcomings of the different innovative processes, highlighting the differences in terms of yield, selectivity, and economic and environmental sustainability.

Asunto(s)

RESUMEN

The freshwater microalga Chlorella vulgaris was cultured batchwise on the seawater-simulating Schlösser medium either in a 1.1-L-working volume helicoidal photobioreactor (HeP) or Erlenmeyer flask (EF) as control and continuously supplying air as CO2 source. In these systems, maximum biomass concentration reached 1.65 ± 0.17 g L(-1) and 1.25 ± 0.06 g L(-1) , and maximum cell productivity 197.6 ± 20.4 mg L(-1)  day(-1) and 160.8 ± 12.2 mg L(-1)  day(-1) , respectively. Compared to the Bold's Basal medium, commonly employed to cultivate this microorganism on a bench-scale, the Schlösser medium ensured significant increases in all the growth parameters, namely maximum cell concentration (268% in EF and 126% in HeP), maximum biomass productivity (554% in EF and 72% in HeP), average specific growth rate (67% in EF and 42% in HeP), and maximum specific growth rate (233% in EF and 22% in HeP). The lipid fraction of biomass collected at the end of runs was analyzed in terms of both lipid content and fatty acid profile. It was found that the seawater-simulating medium, despite of a 56-63% reduction of the overall biomass lipid content compared to the Bold's Basal one, led in HeP to significant increases in both the glycerides-to-total lipid ratio and polyunsaturated fatty acid content compared to the other conditions taken as an average. These results as a whole suggest that the HeP configuration could be a successful alternative to the present means to cultivate C. vulgaris as a lipid source. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:279-284, 2016.

Asunto(s)

RESUMEN

Apigenin is an antioxidant that has shown a preventive activity against different cancer and cardiovascular disorders. In this study, we encapsulate apigenin with liposome to tackle the issue of its poor bioavailability and low stability. Apigenin loaded liposomes are fabricated with food-grade rapeseed lecithin in an aqueous medium in absence of any organic solvent. The liposome particle characteristics, such as particle size and polydispersity are optimised by tuning ultrasonic processing parameters. In addition, to measure the liposome encapsulation efficiency accurately, we establish a unique high-performance liquid chromatography technique in which an alkaline buffer mobile phase is used to prevent apigenin precipitation in the column;. salt is added to separate lipid particles from the aqeuous phase. Our results demonstrate that apigenin encapsulation efficiency is nearly 98% that is remarkably higher than any other reported value for encapsulation of this compound. In addition, the average particle size of these liposomes is 158.9 ± 6.1 nm that is suitable for the formulation of many food products, such as fortified fruit juice. The encapsulation method developed in this study, therefore have a high potential for the production of innovative, functional foods or nutraceutical products.

Asunto(s)

RESUMEN

Hydrogel templates are formed to entrap various pre-polymers prior to their crosslinking process. Upon the completion of the crosslinking process, an independent polymer network with the same fiber geometry is formed. The hydrogel template can be removed if necessary. As the proof-of-principle, fibers from various polymers are fabricated. The fabricated hybrid polymeric fibers are bioactive and can be bioprinted or assembled using textile processes. The approach can be used for creating complex 3D constructs for various applications.

RESUMEN

The kinetics of a thermostable extracellular acid protease produced by an Aspergillus foetidus strain was investigated at different pH, temperatures and substrate concentrations. The enzyme exhibited maximal activity at pH 5.0 and 55°C, and its irreversible deactivation was well described by first-order kinetics. When temperature was raised from 55 to 70°C, the deactivation rate constant increased from 0.018 to 5.06h(-1), while the half-life decreased from 37.6 to 0.13h. The results of activity collected at different temperatures were then used to estimate, the activation energy of the hydrolysis reaction (E*=19.03kJ/mol) and the standard enthalpy variation of reversible enzyme unfolding (ΔH°U=19.03kJ/mol). The results of residual activity tests carried out in the temperature range 55-70°C allowed estimating the activation energy (E(*)d=314.12kJ/mol), enthalpy (311.27≤(ΔH°d≤311.39kJ/mol), entropy (599.59≤ΔS(*)d≤610.49kJ/mol K) and Gibbs free energy (103.18≤ΔG(*)d≤113.87kJ/mol) of the enzyme irreversible denaturation. These thermodynamic parameters suggest that this new protease is highly thermostable and could be important for industrial applications. To the best of our knowledge, this is the first report on thermodynamic parameters of an acid protease produced by A. foetidus.

Asunto(s)

RESUMEN

Polysaccharide-based nanostructured polymeric microcapsules were fabricated by the electrostatic layer-by-layer self-assembly technique and used to encapsulate mixtures of four different polyphenols in order to achieve their controlled release. The real-time fabrication of the dextran/chitosan multilayer was monitored by quartz crystal microbalance with dissipation monitoring, and the morphology of the nanostructured polymeric capsules was characterized by scanning electron microscopy. The polyphenol encapsulation was obtained by reversible permeability variation of the capsule shell in ethanol:water mixtures. The loading efficiency in different water:ethanol mixtures and the release rate in acidic conditions were characterized by UV spectroscopy and HPLC. The higher loading efficiency was obtained with an ethanol:water 35:65 phenolic solution, equal to 42.0±0.6%, with a total release of 11.5±0.7 mg of total polyphenols per 11.3 µL of microcapsules after 240 min of incubation in acidic environment. The results suggest that polysaccharide-based capsules can be successfully used to encapsulate and release low water-soluble molecules, such as polyphenols.

Asunto(s)

RESUMEN

Hybrid hydrogel fibers were fabricated using hydrogel templates. On page 2146, D. Juncker, A. Khademhosseini, and co-workers show how these fibers containing different fluorescent microbeads have been assembled using textile processes, such as braiding and weaving, to create complex 3D patterns for bioengineering applications. The fabricated constructs with clinically relevant dimensions are mechanically stable.

RESUMEN

The adsorption of phenolic compounds from olive oil wastewater by commercial activated carbon was studied as a function of adsorbent quantity and temperature. The sorption kinetics and the equilibrium isotherms were evaluated. Under optimum conditions (8 g of activated carbon per 100 mL), the maximum sorption capacity of activated carbon expressed as mg of caffeic acid equivalent per g of activated carbon was 35.8 at 10 °C, 35.4 at 25 °C and 36.1 at 40 °C. The pseudo-second-order model was considered as the most suitable for kinetic results, and Langmuir isotherm was chosen to better describe the sorption system. The results confirmed the efficiency of activated carbon to remove almost all phenolic compound fractions from olive mill effluent. The preliminary results obtained will be used in future studies. The carbohydrate fraction of this upgraded residue could be employed to produce bioethanol, and adsorbed phenolic compounds can be recovered and used in different industries.

RESUMEN

To reduce CO2 emissions and simultaneously produce biomass rich in essential fatty acids, Chlorella vulgaris CCAP 211 was continuously grown in a tubular photobioreactor using air alone or air enriched with CO2 as the sole carbon source. While on one hand, nitrogen-limited conditions strongly affected biomass growth, conversely, they almost doubled its lipid fraction. Under these conditions using air enriched with 0, 2, 4, 8, and 16% (v/v) CO2 , the maximum biomass concentration was 1.4, 5.8, 6.6, 6.8, and 6.4 gDB L(-1) on a dry basis, the CO2 consumption rate 62, 380, 391, 433, and 430 mgCO2 L(-1) day(-1) , and the lipid productivity 3.7, 23.7, 24.8, 29.5, and 24.4 mg L(-1) day(-1) , respectively. C. vulgaris was able to grow effectively using CO2 -enriched air, but its chlorophyll a (3.0-3.5 g 100gDB (-1) ), chlorophyll b (2.6-3.0 g 100gDB (-1) ), and lipid contents (10.7-12.0 g 100gDB (-1) ) were not significantly influenced by the presence of CO2 in the air. Most of the fatty acids in C. vulgaris biomass were of the saturated series, mainly myristic, palmitic, and stearic acids, but a portion of no less than 45% consisted of unsaturated fatty acids, and about 80% of these were high added-value essential fatty acids belonging to the ω3 and ω6 series. These results highlight that C. vulgaris biomass could be of great importance for human health when used as food additive or for functional food production.

Asunto(s)