RESUMEN

The use of sulfonium salts in organic synthesis has experienced a dramatic increase during the last years that can arguably be attributed to three main factors; the development of more direct and efficient synthetic methods that make easily available sulfonium reagents of a wide structural variety, their intrinsic thermal stability, which facilitates their structural modification, handling and purification even on large scale, and the recognition that their reactivity resembles that of hypervalent iodine compounds and therefore, they can be used as replacement of such reagents for most of their uses. This renewed interest has led to the improvement of already existing reactions, as well as to the discovery of unprecedented transformations; in particular, by the implementation of photocatalytic protocols. This review aims to summarize the most recent advancements on the area focusing on the work published during and after 2020. The scope of the methods developed will be highlighted and their limitations critically evaluated.

RESUMEN

The cooperation between a geometrically constrained, highly electrophilic phosphorus(V) center, and an electronically rich tetradentate bis(amidophenolate) ligand enables the cleavage of the CO bond from typical aldehydes and ketones delivering iminio phosphoramidate species. The amphiphilic nature of these products, which is demonstrated through their reaction with typical Lewis acids and bases, enables their use as a mild source of silylium cations from silanes, allowing the selective reductive coupling of aldehydes to ethers under catalytic conditions.

RESUMEN

The one-pot synthesis of λ4-dibenzothiophen-5-imino-N-dibenzothiophenium triflate (1) in multigram scale is reported. This compound reacts with Rh2(esp)2 (esp=α,α,α',α'-tetramethyl-1,3-benzenedipropionic acid) generating a Rh-coordinated sulfonitrene species, which is able to transfer the electrophilic nitrene moiety to olefins. When indenes are used as substrates, isoquinolines are obtained in good yields. We assumed that after formation of the corresponding N-sulfonio aziridine, a ring expansion occurs via selective C-C bond cleavage and concomitant elimination of dibenzothiophene. Unexpectedly, a similar protocol transforms 1-arylcyclobutenes into 1-cyano-1-arylcyclopropanes. Our calculations indicate that aziridination is not favored in this case; instead, sulfilimine-substituted cyclobutyl carbocations are initially formed, and these evolve to the isolated cyclopropanes via ring contraction. Both procedures are operationally simple, tolerate a range of functional groups, including oxidation-sensitive alcohols and aldehydes, and enable the convenient preparation of valuable 15N-labelled products. These results demonstrate the potential of 1 to provide alternative pathways for the selective transfer of N-atoms in organic molecules.

RESUMEN

In the presence of catalytic amounts of the paddlewheel dirhodium complex Rh2(esp)2, α-diazo dibenzothiophenium salts generate highly electrophilic Rh-coordinated carbenes, which evolve differently depending on their substitution pattern. Keto-moieties directly attached to the azomethinic carbon promote carbene insertion into one of the adjacent C-S bonds, giving rise to highly electrophilic dibenzothiopyrilium salts. This intramolecular pathway is not operative when the carbene carbon bears ester or trifluoromethyl substituents; in fact, these species react with olefins delivering easy to handle cyclopropyl-substituted sulfonium salts. When indenes are the olefins of choice, the initially formed cyclopropyl rings smoothly open with concomitant departure of dibenzothiophene, enabling access to a series of 2-functionalized naphthalenes.

RESUMEN

The relevance acquired by redox-active ligands in modern catalysis stems from their facile delivery and acceptance of electrons, either to the metal they coordinate to, or directly to an incoming substrate that also binds the central metal. Doing that, they generate coordinated radicals and provide access to more than one spin state during the catalytic cycle. As a consequence, the new reaction barriers are reduced when compared to similar processes that are restricted to a single spin surface. The principles that govern this genuine approach to catalyst design are well-established, and their implementation has allowed the development of synthetically useful catalytic transformations; however, the extension of the concept to species in which p-block elements take the role of central atoms remains largely underdeveloped. Through discussion of the key achievements and recent progress, this Concept Article highlights this original approach to designing (organo)catalysts, discloses the progress achieved, and also reveals the many shortcomings that still exist in the field.

RESUMEN

The synthesis of (±)-angustatin A, a phenanthrene-containing cyclophane that possesses conformational chirality, is reported. Key steps include a Pd-catalyzed Negishi coupling to assemble the necessary terphenyl intermediate, its closure into a 14-membered macrocycle via a catalytic-in-phosphine Wittig olefination, and finally a Pt-catalyzed alkyne hydroarylation, which is able to assemble the phenanthrene unit despite the thermodynamic cost of significantly bending arene A from the ideal plane.

RESUMEN

The evaluation of the pentafluorocyclopropyl group as a chemotype in crop protection and medicinal chemistry has been hampered in the past by the lack of suitable methodologies that enable the practical incorporation of this moiety into advanced synthetic intermediates. Herein, we report the gram-scale synthesis of an unprecedented sulfonium salt, 5-(pentafluorocyclopropyl)dibenzothiophenium triflate, and its use as a versatile reagent for the photoinduced C-H pentafluorocyclopropylation of a broad series of non-previously functionalized (hetero)arenes through a radical mediated mechanism. The scope and potential benefits of the protocol developed are further demonstrated by the late-stage introduction of the pentafluorocyclopropyl unit into biologically relevant molecules and widely used pharmaceuticals.

RESUMEN

This minireview aims to cover the developments of the last few years in the design of reagents able to accomplish the umpolung of the azomethine carbon in diazo compounds namely, α-diazo-λ3-iodanes and α-diazo sulfonium salts. Specifically, the routes available for their preparation and a classification of their unique reactivity patterns (either acting as equivalents of carbene-radical or carbene-carbocation synthons) are discussed. We also present a detailed overview of the synthetic utility of such species and, when possible, a critical comparation their reactivity and properties.

RESUMEN

A series of helically shaped benzo[b]chryseno[4,3-d]thiophenes, naphtho[1,2-b]phenanthro[4,3-d]thiophenes, and chryseno[3,4-b]naphtho[1,2-d]thiophenes is synthesized via a highly enantioselective Au-catalyzed intramolecular alkyne hydroarylation reaction. The inversion barriers of the structures obtained are determined both theoretically and experimentally, and their chiroptical properties are reported. Preliminary studies on the post-synthetic functionalization of these thiahelicenes and their transformation into azahelicenes are also presented. In addition, a straightforward one-step protocol is developed, which wraps the initially obtained chryseno[3,4-b]naphtho[1,2-d]thiophenes into bowl-shaped pleiadene derivatives without erosion of the enantiopurity. The number of structurally related products that are obtained with high enantioselectivity enables the establishment of comprehensive correlations between the structure and conformational stability or (chir)optical properties.

RESUMEN

This manuscript reports the synthesis and structure of an unprecedented sulfonium salt, 5-(trifluorovinyl)dibenzothiophenium triflate, and its use as a versatile reagent for the introduction of the bioisosteric 1,1,2-trifluoroethylene linker in drug-like structures. The protocol developed consists of the reaction of this compound with alcohols and phenols to deliver a complete set of 1,2,2-trifluoro-2-(alkoxy-/aryloxy)ethyl sulfonium salts, which have been purified by column chromatography and fully characterized. Subsequent single electron reduction under mild photochemical conditions efficiently affords the corresponding fluoroalkyl radicals that are trapped either intra- or intermolecularly through their reaction with (hetero)arenes. Theoretical calculations are used to evaluate the conformational consequences derived from the presence of the CF2 -CHF tether.

RESUMEN

We present herein the synthesis of a nearly square-pyramidal chlorophosphorane supported by the tetradentate bis(amidophenolate) ligand, N,N'-bis(3,5-di-tert-butyl-2-phenoxy)-1,2-phenylenediamide. After chloride abstraction the resulting phosphonium cation efficiently promotes the disproportionation of 1,2-diphenylhydrazine to aniline and azobenzene. Mechanistic studies, spectroscopic analyses and theoretical calculations suggest that this unprecedented reactivity mode for PV -centres is induced by the high electrophilicity at the cationic PV -center, which originates from the geometry constraints imposed by the rigid pincer ligand, combined with the ability of the o-amidophenolate moieties to act as electron reservoir. This study illustrates the promising role of cooperativity between redox-active ligands and phosphorus for the design of organocatalysts able to promote redox processes.

RESUMEN

A highly enantioselective synthesis of 5,13-disubstituted dibenzo[d,d']benzo[1,2-b:4,3-b']dithiophenes is reported. Key for the successful assembly of these helical architectures is the last two successive Au-catalyzed intramolecular alkyne hydroarylation events. Specifically, the second cyclization is the enantiodetermining step of the whole process and provides the desired helicenes with excellent ee values when a TADDOL-derived 1,2,3-(triazolium)phosphonite moiety (TADDOL: α,α,α',α'-tetraaryl-1,3-dioxolane-4,5-dimethanol) is employed as an ancillary ligand. The absolute stereochemistry of the newly prepared structures has been determined by X-ray crystallography to be P; the optical properties of these heterohelicenes are also reported. A three-step procedure was subsequently developed that allows the transformation of the initially obtained dithia[5]helicenes into dithia[9]helicenes without erosion of the enantiopurity.

RESUMEN

The reactivity of 5-(alkynyl)dibenzothiophenium salts 1 is explored in the presence of different nucleophiles, dienes, and under photochemical conditions. Reaction with lithium acetylides affords diynes in moderate yields; while depending on the substitution pattern, the reaction with sulfinates delivers either the alkyne transfer products, alkynyl sulfones, or ß-(sulfonium) vinyl sulfones through addition to the C-C triple bond. Similar behavior is observed when tosylamines are used as nucleophiles. Salts of general formula 1 also react with dienes to render the corresponding Diels-Alder cycloadducts. The vinyl sulfonium salts obtained by these routes further react with nucleophiles through a Michael addition, dibenzothiophene elimination sequence. Alternatively, they also engage in photoinduced radical cyclizations to produce substituted phenanthrenes. Attempts to use this specific addition/radical cyclization sequence for the construction of the 6a,7-dehydroaporphine skeleton present in several families of alkaloids are also described.

RESUMEN

A series of expanded helicenes of different sizes and shapes incorporating phenyl- and biphenyl-substituents at the deepest part of their fjord have been synthesized via sequential Au-catalyzed hydroarylation of appropriately designed diynes, and their racemization barriers have been calculated employing electronic structure methods. These show that the overall profile of the inversions (energies, number of transition states and intermediates, and their relative position) is intensively affected by the interplay of steric and attractive London dispersion interactions. Hence, in-fjord substitution constitutes an additional tool to handle the mechanical properties in helicenes of uncommonly large diameter. The photochemical characterization of the newly prepared helical structures is also reported.

Asunto(s)

RESUMEN

5-(Alkynyl)dibenzothiophenium triflates are introduced as new reagents to prepare different protein conjugates through site-selective cysteine alkynylation. The protocol developed allows a highly efficient label of free cysteine-containing proteins with relevant biological roles, such as ubiquitin, the C2A domain of Synaptotagmin-I, or HER2 targeting nanobodies. An electrophilic bis-alkynylating reagent was also designed. The second alkynylating handle thus introduced in the desired protein enables access to protein-thiol, protein-peptide, and protein-protein conjugates, and even diubiquitin dimers can be prepared through this approach. The low excess of reagent needed, mild reaction conditions used, short reaction times, and stability of the S-C(alkyne) bonds at physiological conditions make this approach an interesting addition to the toolbox of classical, site-selective cysteine-conjugation methods.

Asunto(s)

RESUMEN

The one-pot synthesis of well-defined 5-(diarylimino) and 5-(sulfoximido)dibenzothiophenium triflates, respectively from diarylimines or sulfoximines, is reported and the structures of a series of these compounds are elucidated by X-ray crystallography. In analogy to their hypervalent I(iii) analogues, the iminoyl and sulfoximidoyl groups of these compounds can be selectively transferred to organic substrates. Specifically, the uncatalyzed imination of thiols or sulfinates proceeds with good yields, while under the mild reaction conditions offered by visible light photoredox catalysis, the radical amination of hydrazones or the sulfoximidation of benzylic, allylic and propargylic C-H bonds takes place satisfactorily.

RESUMEN

S-Aryl dibenzothiophenium salts, obtained through a highly regioselective C-H sulfenylation of o-benzyl-protected phenols, are used as precursors of 6H-benzo[c]chromenes. The reaction starts with a photocatalytically triggered single-electron transfer to the sulfonium salt, which promotes the formation of an aryl radical via selective mesolitic cleavage of the S-Arexo bond. Mechanistic studies reveal that this initial radical species cyclizes following a kinetically favored 5-exo-trig pathway. Subsequent ring expansion, favored by rearomatization, delivers the desired tricyclic systems.

RESUMEN

The one-pot synthesis of a series of sulfonium salts containing transferable diazomethyl groups is described, and the structure of these compounds is elucidated by X-ray crystallography. Under photochemical conditions, reaction of these salts with N,N-dialkyl hydrazones affords 1-(dialkylamino)-1,2,3-triazoles via diazomethyl radical addition to the azomethine carbon followed by intramolecular ring closure. The straightforward transformation of the structures thus obtained into mesoionic carbene-metal complexes is also reported and the donor properties of these new ligands characterized.

RESUMEN

The synthesis of unprecedented BINOL-derived cationic phosphonites is described. Through the use of these phosphanes as ancillary ligands in AuI catalysis, a highly regio- and enantioselective assembly of appropriately designed alkynes into 1-(aryl)benzo[5]carbohelicenes is achieved. The modular synthesis of these ligands and the enhanced reactivity that they impart to AuI -centers after coordination have been found to be the key features that allow an optimization of the reaction conditions until the desired benzo[5]helicenes are obtained with high yield and enantioselectivity.

RESUMEN

A selective and scalable two-step approach to the dimerization of norbornadiene (NBD) into its thermodynamically most stable dimer, heptacyclo[6.6.0.02,6 .03,13 .04,11 .05,9 .010,14 ] tetradecane, (HCTD) is reported. Calculations indicate that the reaction starts with the Rh-catalyzed stepwise homo Diels-Alder cyclisation of NBD into its exo-cis-endo dimer. Treatment of this compound with acid promotes its evolution to HCTD via a [1,2]-sigmatropic rearrangement. The assemblies of 7,12-disubstituted cages from 7-(alkyl/aryl) NBDs, as well as the selective post-synthetic C-H functionalization of the core HCTD scaffold at position C1, or positions C1 and C4 are described.