RESUMEN

Microbial composition across substrates in mangroves, particularly in the Middle East, remains unclear. This study characterized bacterial communities in sediment, water, Terebralia palustris snail guts, and plastic associated with Avicennia marina mangrove forests in two coastal lagoons in the Sea of Oman using 16S rDNA gene MiSeq sequencing. The genus Vibrio dominated all substrates except water. In the gut of snails, Vibrio is composed of 80-99% of all bacterial genera. The water samples showed a different pattern, with the genus Sunxiuqinia being dominant in both Sawadi (50.80%) and Qurum (49.29%) lagoons. There were significant differences in bacterial communities on different substrata, in particular plastic. Snail guts harbored the highest number of unique Operational Taxonomic Units (OTUs) in both lagoons, accounting for 30.97% OTUs in Sawadi and 28.91% OTUs in Qurum, compared to other substrates. Plastic in the polluted Sawadi lagoon with low salinity harbored distinct genera such as Vibrio, Aestuariibacter, Zunongwangia, and Jeotgalibacillus, which were absent in the Qurum lagoon with higher salinity and lower pollution. Sawadi lagoon exhibited higher species diversity in sediment and plastic substrates, while Qurum lagoon demonstrated lower species diversity. The principal component analysis (PCA) indicates that environmental factors such as salinity, pH, and nutrient levels significantly influence bacterial community composition across substrates. Variations in organic matter and potential anthropogenic influences, particularly from plastics, further shape bacterial communities. This study highlights the complex microbial communities in mangrove ecosystems, emphasizing the importance of considering multiple substrates in mangrove microbial ecology studies. The understanding of microbial dynamics and anthropogenic impacts is crucial for shaping effective conservation and management strategies in mangrove ecosystems, particularly in the face of environmental changes.

RESUMEN

This work reports the development of multifunctional or polymorphous surfaces using zinc oxide (ZnO) nanorods, silica (SiO2), and fluoropolymer functionalization in a sequential process. Firstly, zinc oxide nanorods were grown on activated carbon cloth (ACC) using a simple low-temperature synthesis process. ZnO nanorods-coated ACC substrate was applied to investigate the antimicrobial properties, and the results showed inhibition of 50% for Escherichia coli (E.coli) and 55% for Bacillus subtilis (B.subtilis) over 48 h of incubation time. Subsequent in-situ modification of silica nanoparticles like layer on ZnO nanorods-coated ACC surface was developed and used as an electrode for brackish water desalination in a capacitive deionization system. ZnO-SiO2 modified ACC surface enhanced the desalination efficiency by 1.6 times, the salt removal rate (SRR) by threefold, and the durability (fouling prevention) for long-term usage compared to pristine ACC. Further modification of the ZnO-SiO2-ACC surface using fluoropolymer rendered the surface superhydrophobic and oleophilic. Vegetable (1.4 g/g) and crude oil (1.6 g/g) adsorption capacities were achieved for modified surface which was 70% enhancement compared with pristine ACC. The dynamic oil spill adsorption test exhibited the complete removal of oil spills on water surfaces within a few seconds, suggesting a potential application in oil spill cleaning.

Asunto(s)

RESUMEN

The development of durable photocatalytic supports resistant in harsh environment has become challenging in advanced oxidation processes (AOPs) focusing on water and wastewater remediation. In this study, stainless steel (SS), SS/Ti (N,O) and SS/Cr-N/Cr (N,O) anticorrosion layers on SS meshes were dip-coated with sol gel synthesised C-N-TiO2 photo catalysts pyrolysed at 350 °C for 105 min, using a heating rate of 50 °C/min under N2 gas. The supported C-N-TiO2 films were characterised by scanning electron microscopy (SEM) coupled with energy dispersive spectroscopy (EDS), X-ray diffraction (XRD) and Raman spectroscopy. The results showed that C-N-TiO2 was successfully deposited on anticorrosion coated SS supports and had different morphologies. The amorphous C and TiO2 were predominant in C-N-TiO2 over anatase and rutile phases on the surface of SS and anticorrosion supports. The C-N-TiO2 coated films showed enhanced photocatalytic activity for the decolouration of O.II dye under both solar and UV radiation. The fabricated C-N-TiO2 films showed significant antibacterial activities in the dark as well as in visible light. Herein, we demonstrate that SS/Ti(N,O) and SS/Cr-N/Cr(N,O) anticorrosion coatings are adequate photocatalytic and corrosion resistant supports. The C-N-TiO2 photo catalytic coatings can be used for water and wastewater decontamination of pollutants and microbes.

RESUMEN

The current study describes the fabrication of chitosan­zinc oxide nanorods composite (CHT/ZnO) on fiberglass panels (support substrate). ZnO nanorods (NRs) with size ranging from 20 to 100 nm and some microrods with an approximate size of 0.5-1 µm were grown on fiberglass panels. CHT 1%/ZnO composite had ZnO NRs incorporated into chitosan (CHT) coating while ZnO NRs were not visible in the CHT 2%/ZnO NRs composite. XRD and FTIR results showed the presence of the ZnO and chitosan. The water contact angle decreased from 80° ± 2° (control) to 65° ± 2° for CHT 1%/ZnO NRs and 42 ± 2° for CHT 2%/ZnO NRs composite coatings. The antimicrobial activities of the coated fiberglass panels were investigated using biofilm-forming bacteria Bacillus subtilis and Escherichia coli under both light and dark conditions. CHT/ZnO composite coated fiberglass panels showed the strongest antimicrobial activity compared to chitosan, ZnO NRs coatings, and Zn-based antifouling paint in the experiments with B. subtilis and E. coli under light conditions. The highest antifouling activity was observed for CHT 2%/ZnO composites. CHT/ZnO composites can be good alternatives to the toxic antifouling paints.

Asunto(s)

RESUMEN

OBJECTIVE: Despite the rising incidence of attention-deficit hyperactivity disorder (ADHD), there is a dearth of studies examining the rate of school dropout and its correlates in non-Western populations. METHODS: Medical records were scrutinized to identify Omani children diagnosed with ADHD from 2006 to 2014 in a tertiary care hospital in Oman. The persistence of ADHD symptoms, school performance and dropout, as well as sociodemographic characteristics were examined. RESULTS: Three hundred sixty-seven children fulfilled the diagnosis of ADHD based on Diagnostic and Statistical Manual of Mental Disorders (Fourth Edition) (DSM-IV) criteria and 16.6% of them had dropped out of school. School dropout was associated with poor school performance, comorbid conduct disorder, and parental divorce. CONCLUSION: This study from Oman concurs with existing literature that school dropout is common among children with ADHD. Concerted efforts are needed to mitigate this trend. Management strategies should incorporate the treatment of comorbid conduct disorder.

Asunto(s)

RESUMEN

Carrageenophyte red seaweed from Oman, Hypnea bryoides, extracted using three different processes: an aqueous, a mild alkaline, and a more vigorous alkaline extraction was investigated. The resulting extract precipitated by alcohol was subject to chemical and rheological measurements. The total carbohydrate [ranged from 36.78 to 41.65 g/100 g], and ash [39.04 to 43.11 g/100 g] were the most abundant components in H. bryoides and contrary to the two, lipid content was found at a minimum [ranging from 2.95 to 3.38 g/100 g]. Alkali treatment with NaOH allowed complete conversion of kappa (κ) carrageenan form as detected by FTIR analysis. Total yield by alkali treatments gave higher yields (33%) compared with aqueous treatments (12%). However, subsequent aqueous treatment produced mixed carrageenan (µ and κ) with higher molecular weight compared with the alkali treatments which produced single carrageenan form (κ) with molecular weight of 4.1 × 10(5) Da. The effects of thermal history on gel-sol and sol-gel transition were investigated by differential scanning calorimeter (DSC) and rheology on a pure sample and 1.5% κ-carrageenan mixture added with 30 mM KCl. Transition temperatures from DSC and rheology showed comparable results and were in good agreement with those previously reported.

Asunto(s)

RESUMEN

BACKGROUND: A previous pilot study showed a high frequency of anti-smooth muscle autoantibody in Omani blood donors and pregnant women. We conducted this larger-scale study to investigate the frequency and significance of several autoantibodies in healthy individuals from different regions of Oman. METHODS: Sera obtained from 1537 healthy Omanis (1153 males and 384 females), ranging in age from 18 to 57 years, were tested for the presence of ten different autoantibodies using indirect immunofluorescence, haemagglutination and latex agglutination techniques. RESULTS: Low levels of autoantibodies were detected in 33.5%, whereas a few individuals (1.8%) showed high autoantibody titres. Anti-smooth muscle autoantibodies (ASMA) were the most prevalent (11%). Anti-nuclear autoantibodies (ANA) were the second most prevalent (7.6%). Anti-thyroid microsomal autoantibodies (ATMA) and anti-thyroglobulin autoantibodies (ATA) were present in 6.5% and 4.4% of individuals, respectively. The other autoantibodies were detected much less frequently: anti-parietal cells autoantibodies (APCA) were found in 1.6%, anti-brush border antibodies (ABBA) in 1.3%, anti-reticulin autoantibodies (ARA) in 1%, antimitochondrial antibodies (AMA) in 0.8%, antiglomerular basement membrane antibodies (AGBMA) in 0.7% and rheumatoid factor (RF) in 0.4%. CONCLUSION: The data indicate that autoantibodies are present in healthy Omani individuals, and therefore caution should be taken when interpreting laboratory results of patients suspected of having autoimmune disease.