RESUMEN

Availability of raw materials in the chemical industry is related to the selection of the chemical processes in which they are used as well as to the efficiency, cost, and eventual evolution to more competitive dynamics of transformation technologies. In general terms however, any chemically transforming technology starts with the extraction, purification, design, manufacture, use, and disposal of materials. It is important to create a new paradigm towards green chemistry, sustainability, and circular economy in the chemical sciences that help to better employ, reuse, and recycle the materials used in every aspect of modern life. Electrochemistry is a growing field of knowledge that can help with these issues to reduce solid waste and the impact of chemical processes on the environment. Several electrochemical studies in the last decades have benefited the recovery of important chemical compounds and elements through electrodeposition, electrowinning, electrocoagulation, electrodialysis, and other processes. The use of living organisms and microorganisms using an electrochemical perspective (known as bioelectrochemistry), is also calling attention to "mining", through plants and microorganisms, essential chemical elements. New process design or the optimization of the current technologies is a major necessity to enhance production and minimize the use of raw materials along with less generation of wastes and secondary by-products. In this context, this contribution aims to show an up-to-date scenario of both environmental electrochemical and bioelectrochemical processes for the extraction, use, recovery and recycling of materials in a circular economy model.

Asunto(s)

RESUMEN

Nowadays, the presence of persistent dissolved pollutants in water has received increasing attention due to their toxic effects on living organisms. Considering the limitations of conventional wastewater treatment processes for the degradation of these compounds, advanced oxidation processes such as electro-Fenton and sono-chemical process, as well as their combination, appear as potentially effective options for the treatment of wastewater contaminated with bio-recalcitrant pollutants. In view of the importance of the development of processes using real effluents, this review aims to provide a comprehensive perspective of sono-electro-Fenton-related processes applied for real wastewater treatment. In the first section, the fundamentals and effectiveness of both homogeneous and heterogeneous electro-Fenton approaches for the treatment of real wastewater are presented. While the second part of this work describes the fundamentals of ultrasound-based processes, the last section focuses on the coupling of the two methods for real wastewater treatment and on the effect of the main operational parameters of the process. On the basis of the information presented, it is suggested that sono-electro-Fenton processes substantially increase the efficiency of the treatment as well as the biodegradability of the treated wastewater. The combined effect results from mass transfer improvement, electrode cleaning and activation, water electrolysis, and the electro-Fenton-induced production of hydroxyl radicals. The information presented in this work is expected to be useful for closing the gap between laboratory-scale assays and the development of novel wastewater technologies.

RESUMEN

In this work, it is evaluated the fixation of carbon dioxide using the alkali generated in the chloralkaline process, as a new way to face the treatment of highly saline wastewater, in which it is aimed not to separate the wastewater into concentrated and diluted streams but to recover value-added products (VAPs) while contributing to minimize the carbon fingerprint of other processes. The electrolytic process is combined with a reactive absorption and with a crystallization, demonstrating the formation of pure nahcolite, hypochlorite (or chlorine) and hydrogen from the waste. Carbon dioxide is captured with a current efficiency over 90% and the energy required is around 0.65 kWh kg-1, which is very promising from the view point of sustainability, considering that the system can be easily powered with green energies.

Asunto(s)

RESUMEN

This work focuses on the evaluation of the electrochemical dewatering of sludge obtained in the coagulation of wastes polluted with oxyfluorfen. To do this, sludge samples were treated, aiming not only to reduce the sludge volume, but also to facilitate the degradation of oxyfluorfen contained in the cake via electrolysis with a boron-doped diamond anode. Results show that water can be effectively recovered through three sequential stages. First, a gravity-driven stage, that can recover around 60% of initial volume and where no oxyfluorfen is dragged. Then, a second stage that involves the application of pressure and which accounts for the recuperation of an additional 25% of the total volume of the water removed and in which oxyfluorfen also remained in the cake. Finally, an electrochemical stage, which involves the application of electricity with increasing electric fields (1.0, 2.0, 4.0, and 16.0 V cm-1), accounting for the recovery of the rest of water released and where an electrolytic degradation of oxyfluorfen is obtained, whose extension depends on the electrode configuration used in the electro-dewatering cell. This electrode configuration also influences the retention or loss of oxyfluorfen from the cake, being the optimum choice the placement of the cathode downstream, next to the outlet of the dewatering cell.

Asunto(s)

RESUMEN

There are various treatments available for soil decontamination, including physical, chemical, thermal and biological treatments. However, when pollutants are persistent or toxic, it is often necessary to use an integrated set of techniques, to enhance decontamination effects. Integrated treatments typically include soil washing, heat treatment, stabilization processes or phytoremediation. The biological recovery of soils contaminated with hydrocarbons or heavy metals is a topic of central interest, since many treatment processes are often extremely aggressive and destroy the flora and microflora of the treated environments and can interfere with the natural properties of the soil. The objective of this work was to analyze the biological recovery of soils treated with an electrokinetic remediation (ER) method at laboratory, pilot and field-scale tests which measure the germination of seeds and growth of maize (Zea mays L.) using a 2D circular arrangement of electrodes (IrO2-Ta2O5 |Ti| |Ti). The hydrocarbon removal rates obtained were greater than 80% for both the hydrocarbon's medium and heavy fractions; after this ER method was employed a phytoremediation treatment was also completed, using maize, which increased the removal rates up to 90%. A coupled electro- and phyto-remediation process was develop at the field-scale within an oil refinery property in Guanajuato, Mexico to demonstrate the successful biological recovery of soils contaminated with hydrocarbons as proved by the germination of seeds and growth of maize in the on-site fields.

Asunto(s)