RESUMEN

With the present accessibility of algal raw material, microbial alginates as a source for strong gelling material are evaluated as an alternative for advanced applications. Recently, we have shown that alginate from algal sources all contain a fraction of very long G-blocks (VLG), that is, consecutive sequences of guluronic acid (G) residues of more than 100 residues. By comparing the gelling properties of these materials with in vitro epimerized polymannuronic acid (poly-M) with shorter G-blocks, but comparable with the G-content, we could demonstrate that VLG have a large influence on gelling properties. Hypothesized to function as reinforcement bars, VLG prevents the contraction of the gels during formation (syneresis) and increases the Young's modulus (strength of the gel). Here we report that these VLG structures are also present in alginates from Azotobacter vinelandii and that these polymers consequently form stable, low syneretic gels with calcium, comparable in mechanical strength to algal alginates with the similar monomeric composition. The bacterium expresses seven different extracellular mannuronan epimerases (AlgE1-AlgE7), of which only the bifunctional epimerase AlgE1 seems to be able to generate the long G-blocks when acting on poly-M. The data implies evidence for a processive mode of action and the necessity of two catalytic sites to obtain the observed epimerization pattern. Furthermore, poly-M epimerized with AlgE1 in vitro form gels with comparable or higher rigidity and gel strength than gels made from brown seaweed alginate with matching G-content. These findings strengthen the viability of commercial alginate production from microbial sources.

Asunto(s)

RESUMEN

Dynamic single-molecule force spectroscopy (SMFS), conducted most commonly using AFM, has become a widespread and valuable tool for understanding the kinetics and thermodynamics of fundamental molecular processes such as ligand-receptor interactions and protein unfolding. Where slowly forming bonds are responsible for the primary characteristics of a material, as is the case in cross-links in some polymer gels, care must be taken to ensure that a fully equilibrated bond has first formed before its rupture can be interpreted. Here we introduce a method, sliding contact force spectroscopy (SCFS), that effectively eliminates the kinetics of bond formation from the measurement of bond rupture. In addition, it permits bond rupture measurements in systems where one of the binding partners may be introduced into solution prior to binding without tethering to a surface. Taking as an example of a slowly forming bond, the "eggbox" junction cross-links between oligoguluronic acid chains (oligoGs) in the commercially important polysaccharide alginate, we show that SCFS accurately measures the equilibrated bond strength of the cross-link when one chain is introduced into the sample solution without tethering to a surface. The results validate the SCFS technique for performing single-molecule force spectroscopy experiments and show that it has advantages in cases where the bond to be studied forms slowly and where tethering of one of the binding partners is impractical.

RESUMEN

To evaluate and develop methodologies for the extraction of gel-forming extracellular polymeric substances (EPS), EPS from aerobic granular sludge (AGS) was extracted using six different methods (centrifugation, sonication, ethylenediaminetetraacetic acid (EDTA), formamide with sodium hydroxide (NaOH), formaldehyde with NaOH and sodium carbonate (Na2CO3) with heat and constant mixing). AGS was collected from a pilot wastewater treatment reactor. The ionic gel-forming property of the extracted EPS of the six different extraction methods was tested with calcium ions (Ca2+). From the six extraction methods used, only the Na2CO3 extraction could solubilize the hydrogel matrix of AGS. The alginate-like extracellular polymers (ALE) recovered with this method formed ionic gel beads with Ca2+. The Ca2+-ALE beads were stable in EDTA, formamide with NaOH and formaldehyde with NaOH, indicating that ALE are one part of the structural polymers in EPS. It is recommended to use an extraction method that combines physical and chemical treatment to solubilize AGS and extract structural EPS.

Asunto(s)

RESUMEN

One of the principal roles of alginate, both natively and in commercial applications, is gelation via Ca(2+)-mediated crosslinks between blocks of guluronic acid. In this work, single molecule measurements were carried out between well-characterised series of nearly monodisperse guluronic acid blocks ('oligoGs') using dynamic force spectroscopy. The measurements provide evidence that for interaction times on the order of tens of milliseconds the maximum crosslink strength is achieved by pairs of oligoGs long enough to allow the coordination of 4Ca(2+) ions, with both shorter and longer oligomers forming weaker links. Extending the interaction time from tens to hundreds of milliseconds allows longer oligoGs to achieve much stronger crosslinks but does not change the strength of individual links between shorter oligoGs. These results are considered in light of extant models for the onset of cooperative crosslinking in polyelectrolytes and an anisotropic distribution of oligoGs on interacting surfaces and provide a timescale for the formation and relaxation of alginate gels at the single crosslink level.

Asunto(s)

RESUMEN

Lyase-catalyzed degradation has been proposed as a more cell-friendly alternative to dissolution of alginate gels than using chelating agents. In this study, we investigated the effect of lyase specificity on degradation of alginate gels, including the effect of crosslinking ions with different affinity for the polymer. Degradation kinetics and products were analyzed. In particular, the degradation products were characterized using novel methods for alginate sequence determination by chromatography. Lyase-catalyzed gel disruption worked well for gels crosslinked with calcium, but was less effective when barium was included in the gel formulation. The importance of crosslinking of long G-blocks in maintaining the structural integrity of the gels was identified. The failure to degrade these long G-blocks, either due to protection of the G-blocks by strong ionic crosslinking or due to lack of lyase activity on G-G linkages, resulted in retained resistance to mechanical disruption of the gel.

Asunto(s)

RESUMEN

Distribution and proportion of ß-D-mannuronic and α-L-guluronic acid in alginates are important for understanding the chemical-physical properties of the polymer. The present state of art methods, which is based on NMR, provides a statistical description of alginates. In this work, a method was developed that also gives information of the distribution of block lengths of each of the three block types (M, G, and MG blocks). This was achieved using a combination of alginate lyases with different substrate specificities, including a novel lyase that specifically cleaves diguluronic acid linkages. Reaction products and isolated fragments of alginates degraded with these lyases were subsequently analyzed with (1)H NMR, HPAEC-PAD, and SEC-MALLS. The method was applied on three seaweed alginates with large differences in sequence parameters (F(G) = 0.32 to 0.67). All samples contained considerable amounts of extremely long G blocks (DP > 100). The finding of long M blocks (DP ≥ 90) suggests that also algal epimerases act by a multiple attack mechanism. Alternating sequences (MG-blocks) were found to be much shorter than the other block types. In connection with method development, an oligomer library comprising both saturated and unsaturated oligomers of various composition and DP 2-15 was made.

Asunto(s)

RESUMEN

Oligosaccharides of ([4)-beta-d-ManpA-(-->](n)) with a degree of polymerisation (DP) of 5, 10 and 15 were generated by partial acid hydrolysis of alginate mannuronan. These were subsequently purified by a combination of size-exclusion chromatography and semi-preparative high-performance anion-exchange chromatography with pulsed amperometric detection. The purity of the isolated oligosaccharides was greater than 96%. With automated operation of the chromatography system, milligram quantities can be generated over a period of a few days. Thus, our methodology now offers some significant advantages over earlier, including our own, protocols focused on uronic acid oligomers, where the final products are either not as pure or more starting material is needed to generate an equivalent yield of product. Removal of ammonium ions in collected fractions after size-exclusion chromatography and prior to freeze-drying was found to be essential to prevent the formation of imines and subsequent Maillard browning products.

Asunto(s)

RESUMEN

Alginates comprised of essentially alternating units of mannuronic (M) acid-guluronic (G) acid (MG-alginate), and G-blocks isolated from a seaweed where subjected to partial acid hydrolysis at pH 3.5 The chain-length distribution of oligosaccharides in the hydrolysate were investigated by statistical analysis after their separation with high-performance anion-exchange chromatography and pulsed amperometric detection (HPAEC-PAD). Simulated depolymerisation of the MG-alginate provided an estimate of the ratio between two acid hydrolysis rate constants (p=8.3+/-1) and the average distribution of the MM linkages in the original sample of polysaccharide chains. In conclusion, we found HPAEC-PAD together with statistical analysis was a useful method to investigate the fine structure and some properties of binary polysaccharides.

Asunto(s)