RESUMEN
Novel semi-transparent organic solar cells (ST-OSC) can be designed with high average visible transmittance (AVT) while at the same time exhibiting superior photovoltaic performance. This reach requires their design to be based not only on conventional window applications but also on functional industrial applications that require exceptional optical performance. In ST-OSC, high AVT can be achieved by photonic-based dielectric/metal/dielectric (DMD) transparent contact engineering. Functional optical modification can also be made with a fine-tuned design of DMD that includes a light management engineering-based approach. Thus, ST-OSCs can be suitable for aesthetic, colourful and decorative industrial windows that provide natural lighting. In this study, we determined optimal ST-OSCs based on a novel PTB7:PC71BM polymer blend with MoO3/Ag/WO3 asymmetric DMD top contact by examining extraordinary optical properties such as AVT, colour rendering index, correlated colour temperature and colour perception over 10 thousand designs. In addition to determining the optimality and extraordinary optical limits for PTB7, we also evaluated the photon-harvesting and photovoltaic performance of ST-OSCs from external quantum efficiency and quantum utilization efficiency. In optimal situations, ST-OSCs offering 48.75% AVT, 99.08 CRI, and sky-blue colours were designed and determined to generate short-circuit current densities of 9.88 mA·cm-2, 13.64 mA·cm-2, and 13.06 mA·cm-2, respectively.
RESUMEN
We report the critical optical properties such as Average Visible Transmittance (AVT), colour, Color Rendering Index (CRI), and Correlated Color Temperature (CCT) of a multicomponent glass system with a nominal composition of 50TeO2-30B2O3-(20-x)Li2O-xCeO2 (x = 0,0.5,1,2,3,4,5,10,15,20 mol%). Various advanced theoretical approaches as well as calculations are utilized in terms of determining the optical properties of studied glasses. The maximum transmittance and AVT values of the glass system exceeded 80% and 79.59%, respectively. The colour coordinates are found extremely near to D65 and the achromatic point without CeO2 contribution. According to our results, the current system has a promising ability to be utilized for coloured window applications in terms of both AVT and colour with 2% CeO2 doping. Our results showed that, the CeO2 additive is able to move the glass colour straight into the red spectrum by shifting the transmittance spectrum to the long-wavelength portion of the visible spectrum. With 10% CeO2 doping, opacity in the visible area and permeability in the NIR region are obtained, and the CCT value changes from 5002 K to 2560 K. It can be concluded that a filter system with modifiable NIR or red optical characteristics may be produced through the CeO2 alterations in borotellurite glass systems.
RESUMEN
Semi-transparent organic solar cells' (ST-OSCs) photovoltaic and high optical performance parameters are evaluated in innovative applications such as power-generating windows for buildings, automobiles, and aesthetic designs in architectural and industrial products. These parameters require the precision design of structures that optimize optical properties in the visible region and aim to achieve the required photon harvest in UV and IR. These designs can be realized by integrating wavelength-selective photonics-based systems into ST-OSC to increase localized absorption in wavelengths greater than 600 nm and NIR and provide modifiable optical properties. In this study, methodologically, we followed highly detailed light management engineering and transfer matrix method-based theoretical and experimental approaches. We discussed the optimal structures by evaluating color, color rendering index, correlated color temperature, and photovoltaic performances for ST-OSCs, including one-dimensional photonic crystal (1D-PC) designed at different resonance wavelengths (λB) and periods. Finally, by integrating fine-tuned (MgF2/MoO3)N 1D-PC, we report the inherently dark purple-red color of the P3HT:PCBM bulk-heterojunction-based ST-OSC neutralizes with the optimal state was 0.3248 and 0.3733 by adjusting close to the Planckian locus. We also enhanced short current density from 5.77 mA/cm2 to 6.12 mA/cm2 and PCE were increased by 7.34% from 1.77% to 1.90% designed for the N = 4 period and λB = 700 nm.
RESUMEN
Photonic-based functional designs and integrations for advanced optoelectronic devices are regarded as promising candidates considering the enhancement of efficiency and tunability. With the aim to improve photovoltaic performance by increasing photon harvesting, the study presents the prominent findings of experimental and theoretical comparison of optical and electrical evaluation integrating a functionally designed one-dimension photonic crystal (1D-PC) into CdTe solar cells. Since transparency of the CdS/CdTe heterojunction based solar cell (SC) is reduced by a photonic band gap formed by (MgF2/MoO3)N 1D-PC; namely, re-harvesting is improved by increasing absorbance. The period number at resonance wavelength of 850 nm and photocurrent density ([Formula: see text]) have remarkable influence on the investigation. For four periods, the reflectance in the region of photonic band gap is sufficient for photon harvesting and saturation occurs. The photovoltaic performances are comparatively analysed for SCs with and without 1D-PC produced at optimal values. The open-circuit voltage does not change, besides, short-circuit current density and maximum-current density vary between 15.86-17.23 mA cm-2 and, 13.08-15.41 mA cm-2. Having integrated the 1D-PC into the structure, it is concluded that the FF and power conversion efficiency increase from 55.27 to 63.35% with an improvement of 15.91% and, from 8.26 to 10.47% with an improvement of 21.10%.
RESUMEN
Dielectric/metal/dielectric plasmonic transparent structures play an important role in tailoring the high-optical performance of various optoelectronic devices. Though these structures are in significant demand in applications, including modification of the optical properties, average visible transmittance (AVT) and colour render index (CRI) and correlated colour temperature (CCT), obtaining optimal ones require precise thickness optimization. The overall objective of this study is the estimation of the optimal design concept of MoO3/Ag/WO3 (10/dAg/dWO3 nm) plasmonic structure. To explore the proper use in optoelectronic devices, we are motivated to conduct a rigorous optical evaluation on the thickness of layers. Having calculated optical characteristics and achieved the highest AVT of 97.3% for dAg = 4 nm and dWO3 = 6 nm by the transfer matrix method, it is quite possible to offer the potential of the structure acting as a transparent contact. Notably, the colour coordinates of the structure are x = 0.3110 and y = 0.3271, namely, it attributes very close to the Planckian locus. This superior colour performance displays that MoO3/Ag/WO3 shall undergo rapid development in neutral-colour windows and LED technologies. Structure with dAg = 6 nm and dWO3 = 16 nm exhibits the highest CRI of 98.58, thus identifying an optimal structure that can be integrated into LED lighting applications and imaging technologies. Besides the colour of structure with dAg = 4 nm and dWO3 = 8 nm is equal for D65 Standard Illuminant, the study reports that the range of CCTs are between 5000 and 6500 K. This optimization makes the structure employable as a near-daylight broadband illuminant. The study emphasizes that optimal MoO3/Ag/WO3 plasmonic structures can be used effectively to boost optoelectronic devices' performance.
RESUMEN
We conducted the present study to design and manufacture a semi-transparent organic solar cell (ST-OSC). First, we formed a transparent top contact as MoO3/Ag/MoO3 in a dielectric/metal/dielectric (DMD) structure. We performed the production of an FTO/ZnO/P3HT:PCBM/MoO3/Ag/MoO3 ST-OSC by integrating MoO3/Ag/MoO3 (10/[Formula: see text]/[Formula: see text] nm) instead of an Ag electrode in an opaque FTO/ZnO/P3HT:PCBM/MoO3/Ag (-/40/130/10/100 nm) OSC, after theoretically achieving optimal values of optical and electrical parameters depending on Ag layer thickness. The transparency decreased with the increase of [Formula: see text] values for current DMD. Meanwhile, maximum transmittance and average visible transmittance (AVT) indicated the maximum values of over 92% for [Formula: see text] = 4 and 8 nm, respectively. For ST-OSCs, the absorption and reflectance increased in the visible region by a wavelength of longer than 560 nm and in the whole near-infrared region by increasing [Formula: see text] up to 16 nm. Moreover, in the CIE chromaticity diagram, we reported a shift towards the D65 Planckian locus for colour coordinates of current ST-OSCs. Electrical analysis indicated the photogenerated current density and AVT values for [Formula: see text] nm as 63.30 mA/cm2 and 38.52%, respectively. Thus, the theoretical and experimental comparison of optical and electrical characteristics confirmed that the manufactured structure is potentially conducive for a high-performance ST-OSC.